Extracting a Service Class

Learning Goals

  • Remove logic from controller actions in to a separate service class
  • Refactor code to eliminate repetition

Introduction

In the previous lessons, we started to see how customizing our JSON data in the controller works but can start to get pretty complicated. It is possible for a single controller action to render data from multiple models on our Rails API. It is also possible to specify what we want and don't want to render.

The complication comes when we start to scale. More models, more data, more pieces to customize until it becomes unmanageable. In this code-along, we're going to look at building our own solution to this problem.

The files in this lesson were populated using the API-only Rails build. Run rails db:migrate and rails db:seed to follow along.

Initial Configuration

There are already three resources set up based on where we left off in the previous lesson on include: birds, locations, and sightings. Birds and locations are related together through sightings:

class Bird < ApplicationRecord
  has_many :sightings
  has_many :locations, through: :sightings
end
class Location < ApplicationRecord
  has_many :sightings
  has_many :birds, through: :sightings
end
class Sighting < ApplicationRecord
  belongs_to :bird
  belongs_to :location
end

And we left off with a messy combination of include, only, and except in order to customize what attributes we wanted to render to JSON:

def show
  sighting = Sighting.find_by(id: params[:id])
  render json: sighting.to_json(:include => {
    :bird => {:only => [:name, :species]},
    :location => {:only => [:latitude, :longitude]}
  }, :except => [:updated_at])
end

Although this is difficult to read, it does work. With this action in place, visiting http://localhost:3000/sightings/2 produces the following set of data:

{
  "id": 2,
  "bird_id": 2,
  "location_id": 2,
  "created_at": "2019-05-14T14:56:35.978Z",
  "bird": {
    "name": "Grackle",
    "species": "Quiscalus Quiscula"
  },
  "location": {
    "latitude": 30.26715,
    "longitude": -97.74306
  }
}

We can use the same render statement in an index action without having to change it:

class SightingsController < ApplicationController
  def index
    sightings = Sighting.all
    render json: sightings.to_json(:include => {
      :bird => {:only => [:name, :species]},
      :location => {:only => [:latitude, :longitude]}
    }, :except => [:updated_at])
  end

  def show
    sighting = Sighting.find_by(id: params[:id])
    render json: sighting.to_json(:include => {
      :bird => {:only => [:name, :species]},
      :location => {:only => [:latitude, :longitude]}
    }, :except => [:updated_at])
  end
end

However, the way things are presents some problems. Having to include this in every controller action would not be very DRY. In addition, as mentioned before, it is difficult to read, and equally difficult to write and update without making errors.

There is also a separate issue - controllers are really just meant to act as a relay between our models and our view, or well, our rendered JSON in this case. If we can extract the work of customizing our JSON data and put it somewhere else, we could keep our controller actions cleaner.

Let's resolve this issue before resolving the issue of readability. One way to resolve this issue is to build a service class.

Creating a Service Class

A service class is a class specific to our domain that handles some of the business logic of the application. In this case, we are looking to handle the logic of arranging our JSON data the way we want it.

In the SightingsController, we already have working render statements. Our goal is not to change these statements, just move the work off of the controller.

To create a class we will be able to utilize in place of the current render statements, first, we'll create a new folder within app called services:

mkdir app/services

Then we'll need to create a service class to use in our SightingsController. Since we're specifically arranging and serving up data, and also for reasons that will become much clearer in the next lesson, we'll create a class called SightingSerializer and save it in the services folder as sighting_serializer.rb:

touch app/services/sighting_serializer.rb

This can be a plain Ruby class without the need to inherit from anything:

class SightingSerializer
end

Once a new class and file are created this way, you'll need to restart the Rails server if it is running in order for SightingSerializer to be recognized and available in places like SightingsController.

Configuring the New Serializer

Looking back at SightingsController, we are currently calling the to_json method on the variables sightings and sighting in the two controller actions:

class SightingsController < ApplicationController
  def index
    sightings = Sighting.all
    render json: sightings.to_json(:include => {
      :bird => {:only => [:name, :species]},
      :location => {:only => [:latitude, :longitude]}
    }, :except => [:updated_at])
  end

  def show
    sighting = Sighting.find_by(id: params[:id])
    render json: sighting.to_json(:include => {
      :bird => {:only => [:name, :species]},
      :location => {:only => [:latitude, :longitude]}
    }, :except => [:updated_at])
  end
end

Remember, though, that everything following to_json is the same for both actions. The goal of our new serializer class is to replace this without having to change too much.

We will approach configuring the serializer in two steps. First, we will want to define an initialize method for the class. If you recall from object-oriented Ruby, we use the initialize method to set up any instance variables that we might want to share over multiple methods. In this case, initialize will take in whatever variable we're dealing with in a particular action, and store it as an instance variable:

class SightingSerializer

def initialize(sighting_object)
  @sighting = sighting_object
end

end

Now, whatever we pass when initializing a new instance of SightingSerializer will be stored as @sighting. We will need to access to this variable elsewhere in the SightingSerializer, so an instance variable is needed here.

The second step is to write a method that will call to_json on this instance variable, handling the inclusion and exclusion of attributes, and return the results. We will call this method to_serialized_json, and for now we can directly copy the to_json logic that currently exists in SightingsController:

class SightingSerializer

def initialize(sighting_object)
  @sighting = sighting_object
end

def to_serialized_json
  @sighting.to_json(:include => {
    :bird => {:only => [:name, :species]},
    :location => {:only => [:latitude, :longitude]}
  }, :except => [:updated_at])
end

end

With this setup, once an instance of SightingSerializer is created, we can call to_serialized_json on it to get our data customized and ready to go as a JSON string!

Now it is time to clean up SightingsController and replace the original render statements with our new service class:

class SightingsController < ApplicationController
  def index
    sightings = Sighting.all
    render json: SightingSerializer.new(sightings).to_serialized_json
  end

  def show
    sighting = Sighting.find_by(id: params[:id])
    render json: SightingSerializer.new(sighting).to_serialized_json
  end
end

Extraction complete! We've resolved the issue of keeping our controller clear of excess logic by moving it to a separate class. However, we still haven't made our to_json any easier to read.

Organizing Options

In the to_serialized_json method, we are passing multiple options into to_json when it is called. These options are just key/value pairs in a hash, though, and we can choose to break this line up to get a better grasp of what is actually going on. Rewriting the method without changing any functionality, we could write:

def to_serialized_json
  options = {
    include: {
      bird: {
        only: [:name, :species]
      },
      location: {
        only: [:latitude, :longitude]
      }
    },
    except: [:updated_at],
  }
  @sighting.to_json(options)
end

Above, we define a variable, options, assigning it to an empty hash. We then define a key on that hash, :include, assigning it to the same hash we had previously. The same for :except.

This time, instead of filling to_json with a long list of options, we pass in the options hash.

Conclusion

With a fully extracted SightingSerializer, we were able to leave our controller free of clutter and extra logic. We were able to write a small class and utilize its methods multiple times, rather than repeat ourselves. Meanwhile, we now have the space within that class to make our code as easy to understand as possible.