3D printable drawer dividers modeled in openscad.
Target sells cheap 6 quart shoe bins. This scad file will generate joints / dividers that fit into that shoebox to divide it into thirds or halfs.
- Outside Dimensions (w/ lid): 13 1/2" length x 8 1/8" width x 4 5/8" height
- Outside Dimensions (just bin): 14" x
- Website Interior Dimensions at bottom: 11 1/2" length x 6 3/8" width x 4 3/8" height
- Measured Interior Dimensions at bottom: 11 1/2" length x 6 1/4" width
We only care about he interior dimensions. There is roughly a 1/2" lip around the top on every side. Actual bottom width is closer to 6 1/4". Actual top width is closer to 7 1/8". New dimensions below.
- Interior Top: 4.375” height x 7.125” width x 12.5” length
- Interior Bottom: 4.375" height x 6.25” width x 11.5" length
There are 25.4mm in 1 inch.
- Height: 111.125mm
- Top: 180.975mm width x 317.5mm length
- Bottom: 158.75mm width x 292.1mm length