Puppet module that can manage an IPA master, replicas and clients.
huit/puppet-ipa aims at the management and configuration of a complete IPA environment under Puppet control.
To start, an IPA master will be required as the beginning of the LDAP/Kerberos environment. IPA replicas can then be added for additional resiliancy.
The IPA primary master server will take a minimum of two Puppet runs to fully configure. This is because the ipa_adminhomedir, ipa_adminuidnumber and ipa_replicascheme facts are not available until the IPA primary master is installed and operational. These facts are necessary to automatically configure clients and replicas.
IPA replica servers will be automatically configured with a replication agreement on the IPA primary master server.
All Puppet nodes added as clients will automatically be added to the IPA domain through exported resources.
Multiple IPA domains are supported.
A cleanup parameter has been included to remove the IPA server or client packages from nodes.
The ability to use Exported resources and Stored Configuration enabled on the Puppet master.
puppetlabs/puppetlabs-firewall module.
puppetlabs/stdlib module.
Available parameters.
####master
Configures a server to be an IPA master LDAP/Kerberos node.
Defaults to 'false'.
####replica
Configures a server to be an IPA replica LDAP/Kerberos node.
Defaults to 'false'.
####client
Configures a server to be an IPA client.
Defaults to 'false'.
####cleanup
Removes IPA specific packages.
Defaults to 'false'.
####domain
Defines the LDAP domain.
Defaults to 'undef'.
####realm
Defines the Kerberos realm.
Defaults to 'undef'.
####adminpw
Defines the IPA administrative user password.
Defaults to 'undef'.
####dspw
Defines the IPA directory services password.
Defaults to 'undef'.
####otp
Defines an IPA client one-time-password.
Defaults to 'undef'.
####dns
Controls the option to configure a DNS zone with the IPA master setup.
Defaults to 'false'.
####fixedprimary
Configure sssd to use a fixed server as the primary IPA server.
Defaults to 'false'.
####forwarders
Defines an array of DNS forwarders to use when DNS is setup. An empty list will use the Root Nameservers.
Defaults to '[]'.
####extca
Controls the option to configure an external CA.
Defaults to 'false'
####extcertpath
Defines a file path to the external certificate file. Somewhere under /root is recommended.
Defaults to 'undef'
####extcert
The X.509 certificate in base64 encoded format.
Defaults to 'undef'
####extcapath
Defines a file path to the external CA certificate file. Somewhere under /root is recommended.
Defaults ro 'undef'
####extcacert
The X.509 CA certificate in base64 encoded format.
Defaults to 'undef'
####dirsrv_pkcs12
PKCS#12 file containing the Directory Server SSL Certificate, also corresponds to the Puppet fileserver path under fileserverconfig for $confdir/files/ipa
Defaults to 'undef'
####http_pkcs12
The PKCS#12 file containing the Apache Server SSL Certificate, also corresponds to the Puppet fileserver path under fileserverconfig for $confdir/files/ipa
Defaults to 'undef'
####dirsrv_pin
The password of the Directory Server PKCS#12 file.
Defaults to 'undef'
####http_pin
The password of the Apache Server PKCS#12 file.
Defaults to 'undef'
####subject
The certificate subject base.
Defaults to 'undef'
####selfsign
Configure a self-signed CA instance for issuing server certificates instead of using dogtag for certificates.
Defaults to 'false'
####loadbalance
Controls the option to include any additional hostnames to be used in a load balanced IPA client configuration.
Defaults to 'false'.
####ipaservers
Defines an array of additional hostnames to be used in a load balanced IPA client configuration.
Defaults to '[]'
####mkhomedir
Controls the option to create user home directories on first login.
Defaults to 'false'.
####ntp
Controls the option to configure NTP on a client.
Defaults to 'false'.
####kstart
Controls the installation of kstart.
Defaults to 'true'.
####desc
Controls the description entry of an IPA client.
Defaults to ''.
####locality
Controls the locality entry of an IPA client.
Defaults to ''.
####location
Controls the location entry of an IPA client.
Defaults to ''.
####sssdtools
Controls the installation of the SSSD tools package.
Defaults to 'true'.
####sssdtoolspkg
SSSD tools package name.
Defaults to 'sssd-tools'
####sssd
Controls the option to start the SSSD service if its not defined elsewhere. Note: Set to false if the SSSD service is defined in your site specific modules.
Defaults to 'true'.
####sudo
Controls the option to configure sudo in LDAP.
Defaults to 'false'.
####sudopw
Defines the sudo user bind password.
Defaults to 'undef'.
####debiansudopkg
Controls the installation of the Debian sudo-ldap package.
Defaults to 'true'.
####automount
Controls the option to configure automounter maps in LDAP.
Defaults to 'false'.
####autofs
Controls the option to start the autofs service and install the autofs package.
Defaults to 'false'.
####svrpkg
IPA server package name.
Defaults to 'ipa-server'.
####clntpkg
IPA client package name.
Defaults to 'ipa-client'.
####ldaputils
Controls the instalation of the LDAP utilities package.
Defaults to 'true'.
####ldaputilspkg
LDAP utilities package name.
Defaults to 'openldap-clients'.
Here are a few simple usage examples. If you don't want to put your passwords in the clear, then use hiera/gpg.
IPA master:
node 'ipamaster.domain.name' {
class { 'ipa':
master => true, # Only one master per Puppet master
domain => 'domain.name',
realm => 'DOMAIN.NAME',
adminpw => 'somepasswd', # Cleartext example
dspw => hiera('some_passwd') # Using hiera
}
}IPA replica:
node 'ipareplica1.domain.name' {
class { 'ipa':
replica => true, # Multiple replicas can be setup.
domain => 'domain.name',
realm => 'DOMAIN.NAME',
adminpw => 'somepasswd',
dspw => 'somepasswd',
otp => 'onetimepasswd'
}
}Another IPA replica:
node 'ipareplica2.domain.name' {
class { 'ipa':
replica => true,
domain => 'domain.name',
realm => 'DOMAIN.NAME',
adminpw => hiera('some_passwd'),
dspw => hiera('some_passwd'),
otp => hiera('one_time_passwd')
}
}IPA client:
node 'ipaclient.domain.name' {
class { 'ipa':
client => true,
domain => 'domain.name',
realm => 'DOMAIN.NAME',
loadbalance => true,
ipaservers => ['ipaloadbalanceddnsname.domain.name','ipamaster.domain.name','ipareplica1.domain.name','ipareplica2.domain.name'],
desc => 'This is an IPA client', # This string will show up the the description attribute of the computer account.
otp => hiera('one_time_passwd')
}
}Cleanup parameter:
node 'ipawhatever.domain.name' {
class { 'ipa':
cleanup => true # Removes IPA completely. Mutually exclusive from master, replica and client parameters.
}
}IPA master and replicas require a RedHat family OS.
Client configuration does not work with Ubuntu 8.04 and Ubuntu 10.04
huit/puppet-ipa - Puppet module that can manage an IPA master, replicas and clients.
Copyright (C) 2013 Harvard University Information Technology
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
Please report issues here.
For more information see https://github.com/huit/puppet-ipa.git