Wuxn Firmware is used to power a Wuxn WXR 3D printer. The firmware has been forked from MarlinFirmware and BIGTREETECH-TouchScreenFirmware. The firmware has been modified to enhance the print performance, quality, strength, and speed of the Wuxn WXR 3D printer. Along with increased print quality and throughput, the 3D printing experience has been dramatically simplified through the use of Wuxn Wizards. The Wuxn Wizards help guide the user through the use of their machine while simultaneously calibrating itself.
Wuxn Firmware Main Features:
- User-Friendly Interface
- Simple access to Common Tools
- First Layer Automatic Adjustment
- Automatic Gantry Alignment
- Multiple Guided Adjustment Wizards
This repository contains the source code needed to compile and build Wuxn Firmware. To use Wuxn Firmware as intended, please download the binaries from our website at https://wuxn3d.com/pages/software-firmware.
Marlin Firmware
Please visit the MarlinFirmware Github page to learn how to compile the Wuxn Firmware. https://github.com/MarlinFirmware/Marlin
BTT TFT Firmware
Please visit the BIGTREETECH-TouchScreenFirmware Github page to learn how to compile the Wuxn Firmware. https://github.com/bigtreetech/BIGTREETECH-TouchScreenFirmware
Wuxn Firmware is liscensed under the GNU GPL 3 license. The firmware for the Wuxn 3D printers is proudly based on Marlin 2.0.x by Scott Lahteine and BTT TFT Firmware, and has been modified and extended by Wuxn in 2021, 2022, and 2023.
There is no warranty for the program, to the extent permitted by applicable law. Wuxn provides this program "as is" without warrenty of any kind, either expressed or implied, inlcuding, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The entire risk as to the quality and performance of the program is with you.
Published by Wuxn LLC. * www.wuxn3d.com * info@wuxn3d.com.