/AdGuardHome

Network-wide ads & trackers blocking DNS server

Primary LanguageGoGNU General Public License v3.0GPL-3.0

 

AdGuard Home

Privacy protection center for you and your devices

Free and open source, powerful network-wide ads & trackers blocking DNS server.

AdGuard.com | Wiki | Reddit | Twitter | Telegram

Code Coverage Go Report Card Docker Pulls
Latest release adguard-home



AdGuard Home is a network-wide software for blocking ads and tracking. After you set it up, it'll cover ALL your home devices, and you don't need any client-side software for that.

It operates as a DNS server that re-routes tracking domains to a “black hole”, thus preventing your devices from connecting to those servers. It's based on software we use for our public AdGuard DNS servers, and both share a lot of code.

To install with curl run the following command:

curl -s -S -L https://raw.githubusercontent.com/AdguardTeam/AdGuardHome/master/scripts/install.sh | sh -s -- -v

To install with wget run the following command:

wget --no-verbose -O - https://raw.githubusercontent.com/AdguardTeam/AdGuardHome/master/scripts/install.sh | sh -s -- -v

To install with fetch run the following command:

fetch -o - https://raw.githubusercontent.com/AdguardTeam/AdGuardHome/master/scripts/install.sh | sh -s -- -v

The script also accepts some options:

  • -c <channel> to use specified channel;
  • -r to reinstall AdGuard Home;
  • -u to uninstall AdGuard Home;
  • -v for verbose output.

Note that options -r and -u are mutually exclusive.

Please read the Getting Started article on our Wiki to learn how to install AdGuard Home manually, and how to configure your devices to use it.

You can use our official Docker image on Docker Hub.

If you're running Linux, there's a secure and easy way to install AdGuard Home: get it from the Snap Store.

See our Wiki.

If you want to integrate with AdGuard Home, you can use our REST API. Alternatively, you can use this python client, which is used to build the AdGuard Home Hass.io Add-on.

Running your own AdGuard Home server allows you to do much more than using a public DNS server. It's a completely different level. See for yourself:

  • Choose what exactly the server blocks and permits.

  • Monitor your network activity.

  • Add your own custom filtering rules.

  • Most importantly, it's your own server, and you are the only one who's in control.

At this point, AdGuard Home has a lot in common with Pi-Hole. Both block ads and trackers using the so-called “DNS sinkholing” method and both allow customizing what's blocked.

Note

We're not going to stop here. DNS sinkholing is not a bad starting point, but this is just the beginning.

AdGuard Home provides a lot of features out-of-the-box with no need to install and configure additional software. We want it to be simple to the point when even casual users can set it up with minimal effort.

Note

Some of the listed features can be added to Pi-Hole by installing additional software or by manually using SSH terminal and reconfiguring one of the utilities Pi-Hole consists of. However, in our opinion, this cannot be legitimately counted as a Pi-Hole's feature.

Feature AdGuard Home Pi-Hole
Blocking ads and trackers
Customizing blocklists
Built-in DHCP server
HTTPS for the Admin interface Kind of, but you'll need to manually configure lighttpd
Encrypted DNS upstream servers (DNS-over-HTTPS, DNS-over-TLS, DNSCrypt) ❌ (requires additional software)
Cross-platform ❌ (not natively, only via Docker)
Running as a DNS-over-HTTPS or DNS-over-TLS server ❌ (requires additional software)
Blocking phishing and malware domains ❌ (requires non-default blocklists)
Parental control (blocking adult domains) ❌ (requires non-default blocklists)
Force Safe search on search engines
Per-client (device) configuration
Access settings (choose who can use AGH DNS)
Running without root privileges

It depends.

DNS sinkholing is capable of blocking a big percentage of ads, but it lacks the flexibility and the power of traditional ad blockers. You can get a good impression about the difference between these methods by reading this article, which compares AdGuard for Android (a traditional ad blocker) to hosts-level ad blockers (which are almost identical to DNS-based blockers in their capabilities). This level of protection is enough for some users.

Additionally, using a DNS-based blocker can help to block ads, tracking and analytics requests on other types of devices, such as SmartTVs, smart speakers or other kinds of IoT devices (on which you can't install traditional ad blockers).

Here are some examples of what cannot be blocked by a DNS-level blocker:

  • YouTube, Twitch ads;

  • Facebook, Twitter, Instagram sponsored posts.

Essentially, any advertising that shares a domain with content cannot be blocked by a DNS-level blocker.

Is there a chance to handle this in the future? DNS will never be enough to do this. Our only option is to use a content blocking proxy like what we do in the standalone AdGuard applications. We're going to bring this feature support to AdGuard Home in the future. Unfortunately, even in this case, there still will be cases when this won't be enough or would require quite a complicated configuration.

Run make init to prepare the development environment.

You will need this to build AdGuard Home:

  • Go v1.22 or later;
  • Node.js v18.18 or later;
  • npm v8 or later;

Open your terminal and execute these commands:

git clone https://github.com/AdguardTeam/AdGuardHome
cd AdGuardHome
make

Warning

The non-standard -j flag is currently not supported, so building with make -j 4 or setting your MAKEFLAGS to include, for example, -j 4 is likely to break the build. If you do have your MAKEFLAGS set to that, and you don't want to change it, you can override it by running make -j 1.

Check the Makefile to learn about other commands.

You can build AdGuard Home for any OS/ARCH that Go supports. In order to do this, specify GOOS and GOARCH environment variables as macros when running make.

For example:

env GOOS='linux' GOARCH='arm64' make

or:

make GOOS='linux' GOARCH='arm64'

You'll need snapcraft to prepare a release build. Once installed, run the following command:

make build-release CHANNEL='...' VERSION='...'

See the build-release target documentation.

Run make build-docker to build the Docker image locally (the one that we publish to DockerHub). Please note, that we're using Docker Buildx to build our official image.

You may need to prepare before using these builds:

  • (Linux-only) Install Qemu:

    docker run --rm --privileged multiarch/qemu-user-static --reset -p yes --credential yes
  • Prepare the builder:

    docker buildx create --name buildx-builder --driver docker-container --use

See the build-docker target documentation.

When you need to debug the frontend without recompiling the production version every time, for example to check how your labels would look on a form, you can run the frontend build a development environment.

  1. In a separate terminal, run:

    ( cd ./client/ && env NODE_ENV='development' npm run watch )
  2. Run your AdGuardHome binary with the --local-frontend flag, which instructs AdGuard Home to ignore the built-in frontend files and use those from the ./build/ directory.

  3. Now any changes you make in the ./client/ directory should be recompiled and become available on the web UI. Make sure that you disable the browser cache to make sure that you actually get the recompiled version.

You are welcome to fork this repository, make your changes and submit a pull request. Please make sure you follow our code guidelines though.

Please note that we don't expect people to contribute to both UI and backend parts of the program simultaneously. Ideally, the backend part is implemented first, i.e. configuration, API, and the functionality itself. The UI part can be implemented later in a different pull request by a different person.

There are two update channels that you can use:

  • beta: beta versions of AdGuard Home. More or less stable versions, usually released every two weeks or more often.

  • edge: the newest version of AdGuard Home from the development branch. New updates are pushed to this channel daily.

There are three options how you can install an unstable version:

  1. Snap Store: look for the beta and edge channels.

  2. Docker Hub: look for the beta and edge tags.

  3. Standalone builds. Use the automated installation script or look for the available builds on the Wiki.

    Script to install a beta version:

    curl -s -S -L https://raw.githubusercontent.com/AdguardTeam/AdGuardHome/master/scripts/install.sh | sh -s -- -c beta

    Script to install an edge version:

    curl -s -S -L https://raw.githubusercontent.com/AdguardTeam/AdGuardHome/master/scripts/install.sh | sh -s -- -c edge

If you run into any problem or have a suggestion, head to this page and click on the “New issue” button. Please follow the instructions in the issue form carefully and don't forget to start by searching for duplicates.

If you want to help with AdGuard Home translations, please learn more about translating AdGuard products in our Knowledge Base. You can contribute to the AdGuardHome project on CrowdIn.

Another way you can contribute is by looking for issues marked as help wanted, asking if the issue is up for grabs, and sending a PR fixing the bug or implementing the feature.

Please note that these projects are not affiliated with AdGuard, but are made by third-party developers and fans.

This software wouldn't have been possible without:

You might have seen that CoreDNS was mentioned here before, but we've stopped using it in AdGuard Home.

For the full list of all Node.js packages in use, please take a look at client/package.json file.

Our main idea is that you are the one, who should be in control of your data. So it is only natural, that AdGuard Home does not collect any usage statistics, and does not use any web services unless you configure it to do so. See also the full privacy policy with every bit that could in theory be sent by AdGuard Home is available.