Pinned Repositories
avxtest
Testing AVX capabilities with GCC
cfMesh
Unofficially gitified from the original source code of cfMesh: http://www.c-fields.com/cfmesh - along with a few changes of my own. Official project page:
cgnsToFromFoam
Port of cgnsToFoam from TurbMachinery SIG to OpenFOAM 5.x and newer
evapVOFHardt
Repository that has an adaptation of the "Solver for the simulation of two phase flows with phase change (without contact line evaporation) based on Hardt/Wondra". Original source: http://www.ttd.tu-darmstadt.de/forschung_1/openfoamdatenbank/evapvofhard.en.jsp
ImmersedBoundary
(Unofficial) Immersed Boundary toolkit for foam-extend
localFoamToTecplot360
This is an adaptation of foamToTecplot360 from the original OpenFOAM (www.openfoam.org), designed for those using the Debian/RPM installation packages of OpenFOAM. This adaptation in no way supported by the original authors and trademark holders.
perturbU
A few utilities for initializing fields for LES simulations for OpenFOAM.
reconstruct-interpolate-fields
Utilities designed for OpenFOAM, for reconstructing and interpolating fields at the post-processing stage.
solidMechanics
Derived from http://www.cfd-online.com/Forums/openfoam-news-announcements-other/106881-solid-mechanics-solvers-added-openfoam-extend-4.html#post432903
swak4foam
VERY OUTDATED clone from the stable repository of swak4foam: svn://svn.code.sf.net/p/openfoam-extend/svn/trunk/Breeder_2.0/libraries/swak4Foam/ - branches will have tweaks
wyldckat's Repositories
wyldckat/evapVOFHardt
Repository that has an adaptation of the "Solver for the simulation of two phase flows with phase change (without contact line evaporation) based on Hardt/Wondra". Original source: http://www.ttd.tu-darmstadt.de/forschung_1/openfoamdatenbank/evapvofhard.en.jsp
wyldckat/solidMechanics
Derived from http://www.cfd-online.com/Forums/openfoam-news-announcements-other/106881-solid-mechanics-solvers-added-openfoam-extend-4.html#post432903
wyldckat/reconstruct-interpolate-fields
Utilities designed for OpenFOAM, for reconstructing and interpolating fields at the post-processing stage.
wyldckat/perturbU
A few utilities for initializing fields for LES simulations for OpenFOAM.
wyldckat/cgnsToFromFoam
Port of cgnsToFoam from TurbMachinery SIG to OpenFOAM 5.x and newer
wyldckat/localFoamToTecplot360
This is an adaptation of foamToTecplot360 from the original OpenFOAM (www.openfoam.org), designed for those using the Debian/RPM installation packages of OpenFOAM. This adaptation in no way supported by the original authors and trademark holders.
wyldckat/avxtest
Testing AVX capabilities with GCC
wyldckat/FluidStructureInteraction
Repository for making it easier to keep track of changes needed for making this toolkit operational in various foam-extend versions
wyldckat/transientSimple
Minor adjustments to the original source: http://openfoamwiki.net/index.php/Main_ContribExamples/PISOvsTransientSimple
wyldckat/wallShearStressLES
Utility from the forum, adapted for OpenFOAM 2.2.x and 2.3.x: http://www.cfd-online.com/Forums/openfoam/103304-calculate-wall-shear-stress-of210-les-simulation-2.html#post467894
wyldckat/localCCM26ToFOAM
This is a partial adaptation of ccm26ToFoam from the original OpenFOAM (www.openfoam.org), designed for those using the Debian/RPM installation packages of OpenFOAM. This adaptation in no way supported by the original authors and trademark holders.
wyldckat/wallHeatFluxIncompressible
wallHeatFlux for incompressible flow, originally from here: http://www.cfd-online.com/Forums/openfoam-post-processing/101972-wallheatflux-utility-incompressible-case.html#post368330
wyldckat/DESModelRegions
Bringing back DESModelRegions to OpenFOAM 5 and 6
wyldckat/scripts4OpenFOAM3rdParty
Unofficial auxiliary scripts for compiling OpenFOAM's 3rd Party dependencies
wyldckat/CJsnappyHexMesh
Adaptation to OpenFOAM 2.1.x of "Christoffer Järpner: Projection of a mesh on an stl surface" available at http://www.tfd.chalmers.se/~hani/kurser/OS_CFD_2011/ which originally was for OpenFOAM 1.6-ext.
wyldckat/stitchMeshMultiPatch
Takes a mesh and one of more pairs of patches and merges the faces on each pair of patches (if geometrically possible) so the faces become internal. - Base on the original stitchMesh from OpenFOAM 2.2.x.
wyldckat/nonlinearLESkit
Proof of concept for this thread: http://www.cfd-online.com/Forums/openfoam-programming-development/144714-problem-implementing-non-linear-sgs-model.html
wyldckat/tabulatedThermophysicalProperties
wyldckat/yPlusLESWCompressible
yPlusLES with the "-compressible" option, based on OpenFOAM 2.2.x
wyldckat/forceDirCoeffs
Function object forceCoeffs with side forces for OpenFOAM
wyldckat/oldBuildScriptsForOpenFOAM
Repository where I keep some of my old build scripts for old versions of OpenFOAM
wyldckat/OpenFOAM-combo
This is a combo git repository, which (unofficially) has all of the official OpenFOAM git versions from 1.5.x to 2.3.x
wyldckat/OSIG-TurboMachinery-turboPerformance-foam-extend
Unofficial adaptation of the source code from svn://svn.code.sf.net/p/openfoam-extend/svn/trunk/Breeder_1.6/OSIG/TurboMachinery/ for foam-extend 3.0 and newer
wyldckat/foamToVTKSwapEndian
Experimental modified foamToVTK from OpenFOAM, for exporting data with the opposite endianess.
wyldckat/nucleation-modular
Forked from https://code.google.com/archive/p/nucleation/source/modular/source for easier access to files
wyldckat/nucleation-original
Forked from https://code.google.com/archive/p/nucleation/source/original/source for easier access to files
wyldckat/OpenFOAM-combo-pre15x
This is a combo git repository, which (unofficially) has all of the source code of the official OpenFOAM releases from 1.1 to 1.5, without third-party software.
wyldckat/OpenFOAM-dev
OpenFOAM Foundation development repository
wyldckat/stressapptest
Stressful Application Test - userspace memory and IO test
wyldckat/ThirdParty-dev
OpenFOAM-dev third-party library compilation scripts