synology-nginx-proxy-manager-compose-file
docker-compose file for synology DSM 7+ npm
Synology Nginx proxy manager docker compose file (tested on Synology DSM 7.2) based on excellent post from https://www.wundertech.net/nginx-proxy-manager-synology-nas-setup-instructions/
- if you want to use npm (nginx proxy manager) with this docker compose, you need to forward ports on your router:
- router port 80 goes to synology lan ip and port 8085
- router port 443 --> 4443
- your router must be able to ping docker ip ranges
- docker ip ranges are usually : 172.1x.xxx.xxx in this compose file, I use 3 networks : 172.17.0.0/24 for mariadb sql, 192.168.1.198 for npm host in macvlan network, and 192.168.10.0/24 for npm bridge
- if your router does not ping your synology docker networks, you can use ip routes as below fyi my router is on LAN IP: 192.168.1.1
- target: the docker network you want to route
- gateway: your synology local IP address (e.g. 192.168.1.xx where xx is between 2 and 255) IP routes to add:
e.g.
| target | Gateway | metric | table |
|---|---|---|---|
| 172.17.0.0/16 | 192.168.1.xx | 0 | main |
| 172.18.0.0/16 | 192.168.1.xx | 0 | main |
| 172.19.0.0/16 | 192.168.1.xx | 0 | main |
| 192.168.10.0/16 | 192.168.1.xx | 0 | main |
- npm usage: you can add a proxy host : e.g. test.yourdomain.com which forwards to destination on lan docker network : 172.17.0.1 (172.17.0.1 is the gateway for the docker subnet 172.17.0.0/16) and port: xxxx (the port you choosed to expose from your docker component)