/mqTTL

Integrate all types of Xiaomi (Mijia) BLE devices into Home Assistant, by relaying messages from Gateway's TTL to MQTT.

Primary LanguageC++

mqttl

https://bbs.hassbian.com/thread-10434-1-1.html

米家蓝牙设备接入HA/NR的最佳方案，同时支持多个蓝牙网关、任意蓝牙设备（只要能连接蓝牙网关），通用固件不用自己编译，含配网、OTA等功能。

Integrate all types of Xiaomi (Mijia) BLE devices into Home Assistant, by relaying messages from Gateway's TTL to MQTT, running on ESP-01S (ESP8266).

Frok from https://github.com/killadm/LOCK2MQTT, thks to killadm!

It will relay the information of did/eid/edata from all the ttl messages contain ble_event to hass instance via mqtt, with the topic of mqttl/did xxxx/eid xxx and payload of edata. On the HA side, the value of edata will be used to mapped to individual sensors.

Works with multiple BLE Gateways of different types and any kinds of Xiaomi (Mijia) BLE devices.

Usage

  1. Flash ESP module (by usb-ttl or OTA);
  2. Connect to the TTL pins of BLE Gateway device;
  3. Join the AP named mqttl_xxxx, with the password of mqttlpassword;
  4. Configure WiFi and MQTT broker;
  5. Configure the sensors by yaml in Home Assistant (this step could be accomplished before flash ESP).

Connection

Connection Of ESP module with BT GW

example of yaml

  • lock.yaml: Zelkova K1 Smart Lock
  • flora.yaml: HHCCJCY01
  • tmhm.yaml: LYWSD03MMC

设备did need to be replaced with correct dids