/ESP32_SPIS

Firmware for u-blox NINA W102 WiFi/BT module

Primary LanguageC++

Arduino NINA-W102 firmware

This firmware uses Espressif's IDF

Building

  1. Download the ESP32 toolchain
  2. Extract it and add it to your PATH: export PATH=$PATH:<path/to/toolchain>/bin
  3. Clone v3.1 of the IDF: git clone --branch v3.1 --recursive https://github.com/espressif/esp-idf.git
  4. Set the IDF_PATH environment variable: export IDF_PATH=<path/to/idf>
  5. Run make to build the firmware (in the directory of this read me)
  6. Load the Tools -> SerialNINAPassthrough example sketch on to the board
  7. Use esptool to flash the compiled firmware

License

Copyright (c) 2018 Arduino SA. All rights reserved.

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA