CW01
This module can be purchased on Xinabox CC.
General Description
This xChip forms part of the core modules and is equipped with WiFi.
Key Features
- IEEE802.11 b/g/n
- Complete TCP/IP protocol stack
- WiFi @ 2.4 GHz supports WPA / WPA2 security modes
- Based on ESP-12-F
- PCB antenna
- 4M bytes SPI Flash for programming.
Arduino
- Video: Arduino coding with the CW01
- You need an IP01 or IP02 to program the CW01
- Installation of the Arduino IDE
- Installation of the ESP8266 Arduino Core
- Connect the CW01 to the IP0x using a connector.
- Plug the circuit into your USB port on your computer.
Arduino pins
| Description | Arduino Pin # |
|---|---|
| RGB LED Red | 12 |
| RGB LED Green | 13 |
| RGB LED Blue | 5 |
| I2C SCL | 14 |
| I2C SDA | 2 |