Patched boot.img images for systemless root on XIOAMI MI A2
Ready-to-use boot.img for installing Magisk.
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this tutorial
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
- Unlocked bootloader
- ADB/FASTBOOT Drivers
- USB Cable
- Latest Magisk Manager.apk
- corresponding patched boot.img
-
Install the latest Magisk Manage directly from GitHub's project (link above).
-
Reboot your device to bootloader/fastboot mode. This can be done powering off you phone and then press VOL- and POWER at the same time -or- Connect you phone with USB Debugging enabled, open a Command Prompt window and type:
adb reboot bootloader
- Now your phone now should reboot in bootloader/fastboot mode
-
Check your device gets recognized by your pc, type:
fastboot devices
HELP! My phone doesn't shows up! What should I do?
Check your drivers and try again
You can flash patched boot.img directly to your phone:
ATTENTION! Use your phone's version (check under Settings-> About-> Compilation number), using the wrong one may have unwanted results.
fastboot flash boot_a replace-with-correct-path/V.X.X.XX.X.ODIMIFE-PATCHED.IMG
fastboot flash boot_b replace-with-correct-path/V.X.X.XX.X.ODIMIFE-PATCHED.IMG
(where X's are your phones compilation number)
Now reboot you phone:
fastboot reboot
That's it!
This is the recommended method. If something goes wrong, rebooting your phone should get everything back to normal
ATTENTION! Use your phone's version (check under Settings-> About-> Compilation number), using the wrong one may have unwanted results.
fastboot boot replace-with-correct-path/V.X.X.XX.X.ODIMIFE-PATCHED.IMG
Your phone will reboot itself.
Now your phone should have booted normally but now with magisk temporarily installed, please check everything is working. (Camera, Wi-FI, Bluetooth, Calls... Everything else)
If somethig is not working correctly just reboot your phone.
If everything is working as expected, open Magisk Manager and Press Install -> Install -> Direct Install (Recommended).
Wait until Magisk does all the work...
Press Reboot.
That's it!