/ESP32_S8

Programs for Sensor S8 to measure CO2

Primary LanguageC++

ESP32_S8

Evaluating the CO2-Sensor S8 from SenseAir. https://senseair.com/products/size-counts/s8-5/

Code for Arduino (.ino) with some routines to read all register and another code for esp-idf in C. (.c)

Technical information:

There is no standard library aviable now - since the functionality / documentation is poor.

The flow is very simple:

Send a request like {0xFE, 0X04, 0X00, 0X03, 0X00, 0X01, 0XD5, 0XC5} and
wait for the response like {0xFE, 0X04, 0X02, 0X03, 0X88, 0XD5, 0XC5}.
Where:

byte example description on request
0 0xFE any Address
1 0x04 function code (03 read hold reg / 04 read inp. register / 06 write)
2, 3 0x00 0x03 starting Address
4, 5 0x00 0x01 lenght of requested register
6, 7 0xD5 0xC5 CRC low / high

In the response the frist two byte are the same as in the request 0xFE and 0x04.
The requested value is in byte 3 and 4 (0x03) and (0x88) with low-byte first. so 88 * 265 + 03. .. followed by two byte for CRC.