xreef/EByte_LoRa_E220_Series_Library

Issues

• EByte E220 only receiving blank characters

  #6 opened 2 years ago by drank40
  6

• Stop working with ESP32 board manager 3.x.x (based on ESP-IDF v.5)

  #27 opened 3 months ago by lovefool
  5

• In the example program getConfiguration getting error "Data size not match" on esp32-s3 board

  #14 opened a year ago by blacxcode
  2

• Possible Issue: ESP8266 setting Configuration results in soft WDT reset.

  #28 opened 2 months ago by ClausRogisch
  5

• E220 WOR Receiver wakes up only by ESP32 reset; not by external GPIO 15

  #26 opened 2 months ago by Tech500
  2

• Support for other brands of LLCC68

  #25 opened 4 months ago by LimesKey
  3

• How to improve recieve and send times?

  #23 opened 7 months ago by CcKefa
  6

• E220 modules stop working?

  #24 opened 7 months ago by Moskus
  2

• Transmission does not work on UART_BPS greater 9600

  #17 opened a year ago by jiargei
  2

• Inconsistent data in reception with Uno R4 Minima

  #22 opened 7 months ago by WRoss7
  3

• Can't use espSoftwareSerial

  #21 opened 8 months ago by lovefool
  2

• Switching to 868MHz does not work

  #20 opened 9 months ago by WotoAOT
  2

• Does it support E220P?

  #19 opened a year ago by Catta1997
  2

• Transmission not working with STM32 L432KC

  #18 opened a year ago by paddygoat
  2

• is AUX necessary?

  #16 opened a year ago by garudaonekh
  3

• how to set the module to deep sleep

  #15 opened a year ago by homonto
  6

• How to configuration with ESP32-S3 Board?

  #13 opened a year ago by blacxcode
  1

• waitCompleteResponse

  #12 opened 2 years ago by aschewski
  2

• " warning: unused variable 'size' " In Arduino ide 2

  #10 opened 2 years ago by WRoss7
  1

• The #define FREQUENCY_XXX parameter does not change the displayed value of the F

  #8 opened 2 years ago by WRoss7
  2

• Is the variable to set the encryption/decryption key missing?

  #9 opened 2 years ago by WRoss7
  3

• SNR

  #7 opened 2 years ago by RafaelCastro32
  1

• Air Data Rate

  #5 opened 2 years ago by RB3rg
  1

• setConfiguration and "check wiring"

  #2 opened 2 years ago by ChadMatsalla
  4

• Receive with RSSI bug

  #1 opened 2 years ago by xulioc
  2