Tweaked version of Google Assistant SDK used by AssistantPi
This repository contains a Python sample for the Google Assistant API.
See Getting Started with the Raspberry Pi 3 for instructions on how to run the sample on supported hardware.
Python (3.x prefered)
Google API Console Project w/ Google Assistant API enabled.
OAuth client ID credentials with application type
Other
.Use a new virtualenv (recommended):
# python3 (recommended) sudo apt-get update sudo apt-get install python3-dev python3-venv python3 -m venv env env/bin/python -m pip install --upgrade pip setuptools source env/bin/activate # python2 sudo apt-get update sudo apt-get install python-dev python-virtualenv virtualenv env --no-site-packages env/bin/python -m pip install --upgrade pip setuptools source env/bin/activate
Install the sample dependencies:
sudo apt-get install portaudio19-dev libffi-dev libssl-dev
Install the latest Google Assistant SDK and samples package from PyPI:
python -m pip install --upgrade google-assistant-sdk[samples]
Or if working from this repository's sources, run:
python -m pip install --upgrade -e ".[samples]"
Authorize access to the Google Assistant API:
python -m googlesamples.assistant.auth_helpers --client-secrets client_secret_XXXX.json Please go to this URL: ... Enter the authorization code:
Verify audio setup:
# Record a 5 sec sample and play it back python -m googlesamples.assistant.audio_helpers
Record a voice query and the program should play back the Google Assistant's answer:
python -m googlesamples.assistant
Record and send pre-recorded audio to the Assistant:
python -m googlesamples.assistant -i in.wav
Save Assistant response to a file:
python -m googlesamples.assistant -o out.wav
Verify ALSA setup:
# Play a test sound speaker-test -t wav # Record and play back some audio using ALSA command-line tools arecord --format=S16_LE --duration=5 --rate=16k --file-type=raw out.raw aplay --format=S16_LE --rate=16k --file-type=raw out.raw
Run the sample with verbose logging enabled:
python -m googlesamples.assistant --verbose
If Assistant audio is choppy, try adjusting the sound device's block size:
# If using a USB speaker or dedicated soundcard, set block size to "0" # to automatically adjust the buffer size python -m googlesamples.assistant.audio_helpers --audio-block-size=0 # If using the line-out 3.5mm audio jack on the device, set block size # to a value larger than the `ConverseResponse` audio payload size python -m googlesamples.assistant.audio_helpers --audio-block-size=3200 # Run the Assistant sample using the best block size value found above python -m googlesamples.assistant --audio-block-size=value
If Assistant audio is truncated, try adjusting the sound device's flush size:
# Set flush size to a value larger than the audio block size. You can # run the sample using the --audio-flush-size flag as well. python -m googlesamples.assistant.audio_helpers --audio-block-size=3200 --audio-flush-size=6400
See MAINTAINER.md for more documentation on the development, maintainance and release of the Python package itself.
Contributions to this repository are always welcome and highly encouraged.
See CONTRIBUTING.md for more information on how to get started.
Copyright (C) 2017 Google Inc.
Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to you under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.