/visionfive-case

Case for the StarFive VisionFive board

Primary LanguageOpenSCAD

Case for StarFive VisionFive board

The repository contains the OpenSCAD file and the STL files for the case in the image below.

You will need an M3 thread cutter for mounting the board with M3x8mm screws.

I use a 30x30x7mm 5V fan and a 20x20x10 cooler for the CPU.

VisionFive Case

VisionFive Case

License

Creative Commons Attribution-ShareAlike 4.0 International Public License (CC BY-SA 4.0)

Details see https://creativecommons.org/licenses/by-sa/4.0/