0.4
This document should give enough information to get you up and running. Check the wiki for detailed documentation. To use Clyde, the online content editor for hyde see the clyde readme.
Hyde is a static website generator with the power of Django templates behind it. You can read more about its conception, history and features here and here.
Get the hyde source by cloning this repository.
The very basic installation of hyde only needs Django, Markdown and pyYAML. More python goodies are needed based on the features you may use.
pip install -r requirements.txt
The hyde engine has three entry points:
-
Initializer
python hyde.py -i -s path/to/your/site [-t template_name = default] [-f]During initialization hyde creates a basic website by copying the specified template (or default). This template contains the skeleton site layout, some content pages and settings.py.
Be careful with the -f setting, though: it will overwrite your website.
-
Generator
python hyde.py -g -s path/to/your/site [-d deploy_dir=path/to/your/site/deploy] [-k]This will process the content and media and copy the generated website to your deploy directory.
If the -k option is specified, hyde will monitor the source folder for changes and automatically process them when the changes are encountered. This option is very handy when tweaking css or markup to quickly check the results. Note of caution: This option does not update listing files or excerpt files. It is recommended that you run -g again before you deploy the website.
If you are on Mac OS X and would like to get Growl notifications, just set the GROWL setting to the
growlnotifyscript path. -
Web Server
python hyde.py -w -s path/to/your/site [-d deploy_dir=path/to/your/site/deploy]This will start an instance of a cherrypy server and serve the generated website at localhost:8080.
- layout - Template files that are used as base templates for content. None of the files in the layout folder are copied over to the deploy directory.
- content - Any file that is not prefixed with _, . or suffixed with ~ are processed by running through the template engine.
- media - Contains site media, css, js and images.
- settings.py - Django and hyde settings.
These conventions will make it easier to configure hyde plugins.
- Prefix files in layout and other template files in content with underscores
- Keep media folder organized by file type[css, flash, js, images].
Most of the boilerplate configuration comes as a part of the initialized website. The only setting you have to override is the SITE_NAME setting.
Media processors are defined in the following format:
{<folder>:{
<file_extension_with_dot>:(<processor_module_name1>, <processor_module_name2>)}
}
The processors are executed in the order in which they are defined. The output from the first processor becomes the input of the next.
A * instead of folder will apply the setting to all folders. There is no wildcard support for folder name yet, * is just a catch all special case.
File extensions should be specified as .css, .js, .png etc. Again no wildcard support yet.
Hyde retains the YUI Compressor, Clever CSS and HSS processors from aym-cms.
Template processor allows the use of context variables inside your media files.
Runs through the all the files defined in the configuration associated with 'hydeengine.media_processors.YUICompressor' and compresses them.
In the settings file, set YUI_COMPRESSOR to
be a path to a YUI Compressor jar on your computer.
Runs through the all the files defined in the configuration associated with 'hydeengine.media_processors.ClosureCompiler' and compresses them.
In the settings file, set CLOSURE_COMPILER to
be a path to a Closure Compiler jar on your computer.
Runs through the all the files defined in the configuration associated with 'hydeengine.media_processors.CleverCSS' and converts them to css.
You need to install Clever CSS using sudo easy_install CleverCSS command for this processor to work.
Runs through the all the files defined in the configuration associated with 'hydeengine.media_processors.HSS' and converts them to css.
You need to download HSS from the project website and set the HSS_PATH variable to the downloaded path. A version for OS X is installed in the lib folder by default. To use it, just uncomment the HSS_PATH line in the settings.py file of your template.
Runs through the all the files defined in the configuration associated with 'hydeengine.media_processors.SASS' and converts them to css.
You need to install SASS (see the project website) and set the SASS_PATH variable to the path to the sass script.
Runs through the all the files defined in the configuration associated with 'hydeengine.media_processors.LessCSS' and converts them to css.
You need to install Less (see the project website) and set the LESS_CSS_PATH variable to the path to the lessc script.
Runs through the all the files defined in the configuration associated with 'hydeengine.media_processors.Thumbnail' and creates small "thumbnailed" copies. The aspect ratios of the images will be preserved.
You need to install the Python Imaging Library with the sudo easy_install PIL command.
You also need to set the THUMBNAIL_MAX_WIDTH and THUMBNAIL_MAX_HEIGHT variables.
You can set the THUMBNAIL_FILENAME_POSTFIX to change the string that is appended to the filename of thumbnails. By default this is -thumb (i.e. the thumbnail of my-image.png will be called my-image-thumb.png).
You can optionally set the THUMBNAIL_JPEG_QUALITY (between 0 and 100) to control the JPEG compression quality.
Content processors are run against all files in the content folder whereas the media processors are run against the media folder. No content processors have been created yet.
Pages can define their own context variables that are passed to the entire template hierarchy when the page is processed. This is accomplished by using a special tag at the top of the content page(after any extends tags you may have).
{%hyde
<Your variables>
%}
Every page in the template hierarchy gets these context variables: site and page. The site variable contains information about the entire site. The page variable represents the current content page that is being processed. The variables defined at the top of the content pages using the {% hyde %} tags are available through the page variable as attributes.
On your content pages you can define the page variables using the standard YAML format.
{%hyde
title: A New Post
list:
- One
- Two
- Three
%}
Hyde retains the markdown and syntax template tags from aym_cms. Additionally hyde introduces a few tags for excerpts. These tags are added to the Django built in tags so there is no need for the load statements.
Requires markdown to be installed.
sudo easy_install markdown
markdown renders the enclosed text as Markdown markup.
It is used as follows:
<p> I love templates. </p>
{% markdown %}
Render this **content all in Markdown**.
>> Writing in Markdown is quicker than
>> writing in HTML.
1. Or at least that is my opinion.
2. What about you?
{% endmarkdown %}
Hyde also supports markdown2 with the {%markdown2%}{%endmarkdown2%} block template tag.
Requires textile to be installed.
sudo easy_install textile
textile renders the enclosed text as Textile markup.
It is used as follows:
<p> I love templates. </p>
{% textile %}
Render this *content all in Textile*.
bq. Writing in Textile is also quicker than
writing in HTML.
# Or at least that is my opinion.
# What about you?
{% endtextile %}
Requires docutils to be installed.
sudo easy_install docutils
restructuredtext renders the enclosed text as reStructuredText markup.
It is used as follows:
<p> I love templates. </p>
{% restructuredtext %}
Render this **content all in reStructuredText**.
Writing in reStructuredText is also quicker than
writing in HTML.
#. Or at least that is my opinion.
#. What about you?
{% endrestructuredtext %}
The default reStructuredText settings may be changed by assigning a dictionary of setting names and values to the RST_SETTINGS_OVERRIDES setting in the settings file. For information on the various configuration options, see the docutils configuration documentation.
Requires asciidoc to be installed.
asciidoc renders the enclosed text as asciidoc markup.
It is used as follows:
<p> I love templates. </p>
{% asciidoc %}
Render this *content all in asciidoc*.
________________________________________
Writing in asciidoc is also quicker than
writing in HTML.
________________________________________
. Or at least that is my opinion.
. What about you?
{% endasciidoc %}
Requires Pygments.
sudo easy_install Pygments
syntax uses Pygments to render the enclosed text with
a code syntax highlighter. Usage is:
<del>{% load aym %}</del>
<p> blah blah blah </p>
{% syntax objc %}
[obj addObject:[NSNumber numberWithInt:53]];
return [obj autorelease];
{% endsyntax %}
To generate the corresponding CSS, first list the available styles
python
>>> from pygments.styles import get_all_styles
>>> list(get_all_styles())
['manni', 'perldoc', 'borland', 'colorful', 'default', 'murphy', 'vs', 'trac', 'tango', 'fruity', 'autumn', 'bw', 'emacs', 'pastie', 'friendly', 'native']
Then choose a style and generate a style sheet
pygmentize -f html -S native -a .highlight > pygments.css
They are both intended to make writing static content quicker and less painful.
The {%hyde%} tag is used for the page variables, as a template tag all it does is swallow the contents and prevent them from showing up in the html. The even safer approach is to define this tag outside of all blocks so that it is automatically ignored.
The {%excerpt%}{%endexcerpt%} tag decorates the output with html comments that mark the excerpt area. Excerpts marked in this manner can be referenced in other pages using the {%render_excerpt%} or the {%latest_excerpt%} tag.
Render Excerpt takes a page variable and optional number of words argument to render the excerpt from the target page.
Latest Excerpt takes a content folder path and optional number of words as input. It parses through the content pages looking for page variables named created and gets the page with the maximum value and renders the excerpt from that page.
The {%article%}{%endarticle%} tags mark content enclosed in them to be included as inline content when the atom feed is generated.
Render Article renders the html content bracketed by the {%article%} tag from the given page.
To enable Typogrify, use {% filter typogrify %} in your code. Typogrify is "a collection of Django template filters that help prettify your web typography by preventing ugly quotes and widows", according to the project web site. It is automatically enabled in the default template. Some features require you to have smartypants installed.
There are two layouts currently available: default and simple.
The default site layout contains templates for basic site structure, navigation, breadcrumbs, listing, posts and Atom feed and a very basic stylesheet.
The following websites are built using hyde and are open sourced.
(Please let me know if I have missed someone here.)