Q_sensor is a multi-functional Zigbee air quality sensor that integrates various environmental sensors to provide comprehensive monitoring of air quality: temperature, humidity, pressure, CO2 level, VOC index, illuminance.
- AGS10 - VOC sensor (0x1a)
- SCD40 - CO2 sensor (0x62)
- AHT20 - Temperature sensor (0x38)
- BH1750 - Ambient Light sensor (0x23)
- BMP280 - Barometric pressure sensor (0x77)
- QMI8658C - 6-axis attitude gyro sensor (0x6b)
- BS5820 - 5.8G radar sensor (Binary)
Found something at address 0x7e?
- ADC pin V1 - IO2
- ADC pin V2 - IO0
- Button - IO10
- Radar - IO4
- LED - IO5
- SDA - IO6
- SCL - IO7
External converter q.js
- Almost all values use standard clusters (so it will work on any system)
- Configurable reporting
- OTA update possible
- SCD40 gets pressure data from BMP280 for more accurate readings
- All sensors read every 10 seconds
If you don't need some value - go to reporting tab and set
Min rep interval, Max rep interval to 65534 and Min rep change to 0
You can find the latest release on releases page and install like any other ESP32 firmware.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License