Ongekicon-DIY
Arcade size Open-Source Mu-drive/Ongeki controller made with MDF 9T, Acrylic 5T.
This repository does not include wall button, lever, and code for the controller. Also, this design is not 100% accurate to the arcade design.
List of parts that are required (other than MDF/Acrylic) :
| Part | Qty |
|---|---|
| M5 20mm screw | 12 |
| M5 Tee nut | 12 |
| M8 20mm Screw | 7 |
| M8 Nut | 7 |
| M3 35mm Screw | 12 |
| USB-B Block | 2 |
| 60mm buttons | 6 |
| 29mm buttons | 4 |
Assembly Instructions
Coming soon...?
License
This work is licensed under Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0).