yakumo-saki/EnvBoyX

Issues

• [BUG] display value=0で消灯しても勝手に復帰する

  #154 opened 4 months ago by yakumo-saki
  0

• [NOTE] Cloc History

  #122 opened 2 years ago by yakumo-saki
  21

• [BUG] /stastics is misspelled

  #153 opened 2 years ago by yakumo-saki
  0

• [Enhance] Sensor value adjustment is still mockup

  #146 opened 2 years ago by yakumo-saki
  0

• [BUG] TSL2561 sensor is still use delay()

  #144 opened 2 years ago by yakumo-saki
  2

• [BUG] make_sure_wifi_connected is using delay() loop.

  #145 opened 2 years ago by yakumo-saki
  0

• [Feature] Show clock in line 1 when ntp is enabled

  #137 opened 2 years ago by yakumo-saki
  0

• V48.0 Meta issue

  #132 opened 2 years ago by yakumo-saki
  0

• [Feature] Sensor value adjustment

  #99 opened 2 years ago by yakumo-saki
  0

• [Enhance] Hostname(mDNS name) should be shown in /api/v1/getdata and /ping

  #134 opened 2 years ago by yakumo-saki
  0

• [BUG] Autodimmer overrides Time based dimmer

  #133 opened 2 years ago by yakumo-saki
  0

• [ENHANCE]Go to setup mode ONLY wifi connection failed at bootup or dont halt on wifi disconnect

  #136 opened 2 years ago by yakumo-saki
  0

• [Enhance] Set hostname

  #135 opened 2 years ago by yakumo-saki
  1

• v47.0 meta issue

  #116 opened 2 years ago by yakumo-saki
  0

• [Feature] Time based automatic dimmer

  #119 opened 2 years ago by yakumo-saki
  1

• [Enhance] Auto Upgrade Config when config version is changed.

  #124 opened 2 years ago by yakumo-saki
  0

• [BUG] BH1750 is supported device, but I2C scan said unknown device

  #127 opened 2 years ago by yakumo-saki
  0

• [Enhance] ESP8266 can HTTP update

  #128 opened 2 years ago by yakumo-saki
  0

• [Enhance] modernize JS/Web development

  #125 opened 2 years ago by yakumo-saki
  0

• [Enhance] Setup page wifi psk parameter change

  #104 opened 2 years ago by yakumo-saki
  1

• v46 meta

  #114 opened 2 years ago by yakumo-saki
  0

• [Enhance] Add web update feature

  #115 opened 2 years ago by yakumo-saki
  1

• [Enhance] Enable config API on setup mode

  #106 opened 2 years ago by yakumo-saki
  0

• Rewrite web UI to use config API

  #111 opened 2 years ago by yakumo-saki
  0

• [Feature] New setup mode invoke method

  #105 opened 2 years ago by yakumo-saki
  1

• [Feature] Setup page for normal mode

  #107 opened 2 years ago by yakumo-saki
  0

• Add EnvBoyX version to json

  #112 opened 2 years ago by yakumo-saki
  1

• [Enhance] Change Air Pressure delta 1h -> 6h

  #109 opened 3 years ago by yakumo-saki
  0

• [BUG] ESP8266 mDNS responder is not working

  #108 opened 3 years ago by yakumo-saki
  0

• [Notice] EnvBoyX v45.0 feature freeze period

  #100 opened 3 years ago by yakumo-saki
  0

• [Enhance] Enable setup web page in normal mode

  #103 opened 3 years ago by yakumo-saki
  1

• [BUG] Temperature delta value is not shown

  #102 opened 3 years ago by yakumo-saki
  0

• [Enhance] Autodimmer is too sensitive

  #101 opened 3 years ago by yakumo-saki
  0

• [META] Value check when config set

  #87 opened 3 years ago by yakumo-saki
  0

• [Enhance] #87 Handle value error on setup mode web

  #92 opened 3 years ago by yakumo-saki
  0

• [Enhance] Use sendContent in HTTP

  #96 opened 3 years ago by yakumo-saki
  0

• [Enhance] value error handling on Config Set API

  #93 opened 3 years ago by yakumo-saki
  0

• [BUG] set api not response invalid key

  #91 opened 3 years ago by yakumo-saki
  1

• [BUG] Waning is override by Caution

  #85 opened 3 years ago by yakumo-saki
  0

• [Enhance] Config Metadata

  #89 opened 3 years ago by yakumo-saki
  0

• [Feature] Add MH-Z19B ABC ON / OFF config (on startup)

  #76 opened 4 years ago by yakumo-saki
  0

• [Feature] Add skip wait for reconfigure screen

  #71 opened 4 years ago by yakumo-saki
  0

• [Feature] Add setting backup feature

  #51 opened 4 years ago by yakumo-saki
  0

• [Feature] Delta all values

  #80 opened 4 years ago by yakumo-saki
  1

• [Enhance] Pressure diff should be display at lux position

  #75 opened 4 years ago by yakumo-saki
  2

• [Feature] MH-Z19B Auto Baseline Correction on/off / Zero Calibration API

  #66 opened 4 years ago by yakumo-saki
  1

• [Feature] Air pressure delta

  #54 opened 4 years ago by yakumo-saki
  1

• [BUG] MHZ-19B Rx & Tx pins setting are fixed to 14 , 0

  #64 opened 4 years ago by yakumo-saki
  0

• [Enhance] mDNS code ESP32 and ESP8266 are duplicated

  #60 opened 4 years ago by yakumo-saki
  0

• [BUG] CO2 default alert setting below 400ppm is invalid

  #53 opened 4 years ago by yakumo-saki
  1