/Rectangle

Move and resize windows on macOS with keyboard shortcuts and snap areas

Primary LanguageSwiftOtherNOASSERTION

Rectangle

Rectangle is a window management app based on Spectacle, written in Swift.

image

System Requirements

Rectangle supports macOS v10.11+. If you're willing to test on earlier versions of macOS, this can be updated.

Installation

You can download the latest dmg from https://rectangleapp.com or the Releases page.

Or install with brew cask:

brew cask install rectangle

How to use it

The keyboard shortcuts are self explanatory, but the snap areas can use some explanation if you've never used them on Windows or other window management apps.

Drag a window to the edge of the screen. When the mouse cursor reaches the edge of the screen, you'll see a footprint that Rectangle will attempt to resize and move the window to when the click is released.

Snap Area Resulting Action
Left or right edge Left or right half
Top Maximize
Corners Quarter in respective corner
Left or right edge, just above or below a corner Top or bottom half
Bottom left, center, or right third Respective third
Bottom left or right third, then drag to bottom center First or last two thirds, respectively

Ignore an app

  1. Focus the app that you want to ignore (make a window from that app frontmost).
  2. Open the Rectangle menu and select "Ignore app"

Differences with Spectacle

  • Rectangle uses MASShortcut for keyboard shortcut recording. Spectacle used it's own shortcut recorder.
  • Rectangle has additional window actions: move windows to each edge without resizing, maximize only the height of a window, almost maximizing a window.
  • Next/prev screen thirds is replaced with explicitly first third, first two thirds, center third, last two thirds, and last third. Screen orientation is taken into account, as in first third will be left third on landscape and top third on portrait.
  • There's an option to have windows traverse across displays on subsequent left or right executions.
  • Windows will snap when dragged to edges/corners of the screen. This can be disabled.

Terminal commands

The preferences window is purposefully slim, but there's a lot that can be modified via Terminal. After executing a terminal command, restart the app as these values are loaded on application startup.

Keyboard Shortcuts

If you wish to change the default shortcuts after first launch, use the following command. True is for the recommended shortcuts, false is for Spectacle's.

defaults write com.knollsoft.Rectangle alternateDefaultShortcuts -bool true

Halves to thirds (repeated execution of half and quarter actions)

Halves to thirds is controlled by the "Cycle displays" setting in the preferences. If the cycle displays setting is not checked, then each time you execute a half or quarter action, the width of the window will cycle through the following sizes: 1/2 -> 2/3 -> 1/3.

The cycling behavior can be disabled entirely with:

defaults write com.knollsoft.Rectangle subsequentExecutionMode -int 2

subsequentExecutionMode accepts the following values: 0: halves to thirds Spectacle behavior (box unchecked) 1: cycle displays (box checked) 2: disabled 3: cycle displays for left/right actions, halves to thirds for the rest (old Rectangle behavior)

Almost Maximize

By default, "Almost Maximize" will resize the window to 90% of the screen (width & height).

defaults write com.knollsoft.Rectangle almostMaximizeHeight -float <VALUE_BETWEEN_0_&_1>
defaults write com.knollsoft.Rectangle almostMaximizeWidth -float <VALUE_BETWEEN_0_&_1>

Adding Gaps Between Windows

defaults write com.knollsoft.Rectangle gapSize -float <NUM_PIXELS>

Move Up/Down/Left/Right: Don't center on edge

By default, the directional move will center the window along the edge that the window is being moved to.

defaults write com.knollsoft.Rectangle centeredDirectionalMove -int 2

Make Smaller limits

By default, "Make Smaller" will decrease the window until it reaches 25% of the screen (width & height).

defaults write com.knollsoft.Rectangle minimumWindowWidth -float <VALUE_BETWEEN_0_&_1>
defaults write com.knollsoft.Rectangle minimumWindowHeight -float <VALUE_BETWEEN_0_&_1>

Make Smaller/Make Larger size increments

By default, "Make Smaller" and "Make Larger" change the window height/width by 30 pixels.

defaults write com.knollsoft.Rectangle sizeOffset -float <NUM_PIXELS>

Make Smaller/Make Larger "curtain resize" with gaps

By default, windows touching the edge of the screen will keep those shared edges the same while only resizing the non-shared edge. With window gaps, this is a little ambiguous since the edges don't actually touch the screen, so you can disable it for traditional, floating resizing:

defaults write com.knollsoft.Rectangle curtainChangeSize -int 2

Disabling window restore when moving windows

defaults write com.knollsoft.Rectangle unsnapRestore -int 2

Changing the margin for the snap areas

Each margin is configured separately, and has a default value of 5

defaults write com.knollsoft.Rectangle snapEdgeMarginTop -int 10
defaults write com.knollsoft.Rectangle snapEdgeMarginBottom -int 10
defaults write com.knollsoft.Rectangle snapEdgeMarginLeft -int 10
defaults write com.knollsoft.Rectangle snapEdgeMarginRight -int 10

Ignore specific drag to snap areas

Each drag to snap area on the edge of a screen can be ignored with a single Terminal command, but it's a bit field setting so you'll have to determine the bit field for which ones you want to disable.

Bit Snap Area Window Action
1 Top Maximize
2 Bottom Thirds
3 Left Left Half
4 Right Right Half
5 Top Left Top Left Corner
6 Top Right Top Right Corner
7 Bottom Left Bottom Left Corner
8 Bottom Right Bottom Right Corner
9 Top Left Below Corner Top Half
10 Top Right Below Corner Top Half
11 Bottom Left Above Corner Bottom Half
12 Bottom Right Above Corner Bottom Half

To disable the top (maximize) snap area, execute:

defaults write com.knollsoft.Rectangle ignoredSnapAreas -int 1

To disable the Top Half and Bottom Half snap areas, the bit field would be 1111 0000 0000, or 3840

defaults write com.knollsoft.Rectangle ignoredSnapAreas -int 3840

Common Known Issues

Rectangle doesn't have the ability to move to other desktops/spaces.

Apple never released a public API for Spaces, so any direct interaction with Spaces uses private APIs that are actually a bit shaky. Using the private API adds enough complexity to the app to where I feel it's better off without it. If Apple decides to release a public API for it, I'll add it in.

Window moving/resizing appears animated/smooth instead of quick, and windows don't end up where you expect

This is a macOS bug. Here's some things that trigger it:

  • Using the on-screen keyboard
  • Unnecessary accessibility privileges for certain apps, like Alfred. Remove accessibility privileges from apps that don't need them.
  • Running certain apps, like Dragon and Punto Switcher (a Russian app).
  • Certain external monitors trigger this behavior.

You can try enabling "Reduce motion" in the "Display" section of the "Accessibility" System Preferences. This doesn't appear to work with the on-screen keyboard, but might work for other triggers of the issue. Note that this setting will replace the Spaces/Mission Control/Exposé animations with fades.

As a last resort, you can use this workaround release of Rectangle: v0.25.1, but it's just a better experience to avoid the items that trigger it and use the latest version of Rectangle. The ideal scenario is that Apple gets around to fixing it. This scenario will only happen if a lot of people file the issue.

If you are a developer, file an issue here: https://feedbackassistant.apple.com/

If you are not a developer, use: https://www.apple.com/feedback/macos.html

Window resizing is off slightly for iTerm2

By default iTerm2 will only resize in increments of character widths. There might be a setting inside iTerm2 to disable this, but you can change it with the following command.

defaults write com.googlecode.iterm2 DisableWindowSizeSnap -integer 1

Troubleshooting

If windows aren't resizing or moving as you expect, here's some initial steps to get to the bottom of it. Most issues of this type have been caused by other apps.

  1. Make sure macOS is up to date, if possible.
  2. Restart your machine.
  3. Make sure there are no other window manager applications running.
  4. Make sure that the app whose windows are not behaving properly does not have any conflicting keyboard shortcuts.
  5. Try using the menu items to execute a window action or changing the keyboard shortcut to something different so we can tell if it's a keyboard shortcut issue or not.
  6. Enable debug logging, as per the instructions in the following section.
  7. The logs are pretty straightforward. If your calculated rect and your resulting rect are identical, chances are that there is another application causing issues. Save your logs if needed to attach to an issue if you create one.
  8. If you suspect there may be another application causing issues, try creating and logging in as a new macOS user.

View Debug Logging

  1. Hold down the alt (option) key with the Rectangle menu open.
  2. Select the "View Logging..." menu item, which is in place of the "About" menu item.
  3. Logging will appear in the window as you perform Rectangle commands.

Preferences Storage

The configuration for Rectangle is stored using NSUserDefaults, meaning it is stored in the following location: ~/Library/Preferences/com.knollsoft.Rectangle.plist

That file can be backed up or transferred to other machines.


Contributing

Logic from Rectangle is used in the Multitouch app. The Hookshot app is entirely built on top of Rectangle. If you contribute significant code or localizations that get merged into Rectangle, you get free licenses of Multitouch and Hookshot. Contributors to Sparkle, MASShortcut, or Spectacle can also receive free Multitouch or Hookshot licenses (just send me a direct message on Gitter).

Localization

Initial localizations were done using DeepL and Google Translate, but many of them have been updated by contributors. Translations that weren't done by humans can definitely be improved. If you would like to contribute to localization, all of the translations are held in the Main.strings per language. If you would like to add a localization but one doesn't currently exist and you don't know how to create one, create an issue and a translation file can be initialized.

Pull requests for new localizations or improvements on existing localizations are welcome.

Running the app in Xcode (for developers)

Rectangle uses CocoaPods to install Sparkle and MASShortcut.

  1. Make sure CocoaPods is installed and up to date on your machine (sudo gem install cocoapods).
  2. Execute pod install the root directory of the project.
  3. Open the generated xcworkspace file (open Rectangle.xcworkspace).

Signing

  • When running in Xcode (debug), Rectangle is signed to run locally with no developer ID configured.
  • You can run the app out of the box this way, but you might have to authorize the app in System Prefs every time you run it.
  • If you don't want to authorize in System Prefs every time you run it and you have a developer ID set up, you'll want to use that to sign it and additionally add the Hardened Runtime capability to the Rectangle and RectangleLauncher targets.