A colorful and highly configurable alternative to the adb logcat
command from
the Android SDK.
Installation with pip / easy_install (may require sudo)
$ pip install logcat-color
.. or ..
$ easy_install logcat-color
Installation from source (requires setuptools, may require sudo)
To get the source, simply download and extract a release tarball. Alternatively, you can clone the logcat-color git repository directly:
$ git clone git://github.com/marshall/logcat-color.git
To install logcat-color from the source directory, run:
$ python setup.py install
Run and colorify adb logcat
$ logcat-color
Colorify an old logcat text file you have laying around
$ logcat-color < /path/to/my.log
Pipe logcat-color to egrep for only the tags you care about
$ logcat-color -e | egrep '(Tag1|Tag2)'
Run logcat-color with a custom profile for filters, colors, and custom arguments)
$ logcat-color <profile-name>
logcat-color also supports most of the standard adb / logcat arguments, making it a suitable full-time replacement for adb logcat
$ alias logcat=/path/to/logcat-color
$ logcat -e
$ logcat -d
$ logcat -s 123456789 -b radio -b main
For command line usage documentation:
$ logcat-color --help
logcat-color supports a configuration file at $HOME/.logcat-color
The configuration file is simply a python script, with a few interesting variables and types available to it.
Sample .logcat-color
# Full path to adb, default is to look at the environment variable ADB, or
# fall back on using "adb" from the system PATH
adb = "/path/to/adb"
# Width of the TAG column, default is 20
tag_width = 20
# Width of the PID column, default is 8
pid_width = 8
# Width of priority (log level) column, default is 3
priority_width = 3
# Whether or not to wrap the message inside a column. Setting this to False
# enables easier copy/paste. default is True
wrap = True
Profiles live in the logcat-color configuration file, and allow logcat-color to customize ADB and logging even further.
In short, a single Profile can:
- Filter based on arbitrary log data.
- Use custom adb command line arguments, devices, and log formats
- Customize display and color configuration.
A profile is created by simply calling the Profile python constructor with
various named arguments. The only required argument is the Profile's name
:
Profile(name = "myProfile", ...)
You can then have logcat-color use this profile by providing it on the command line. For example:
$ logcat-color myProfile
To customize the Profile, simply pass more named arguments to the Profile
constructor. This is a list of all the currently supported named arguments:
buffers
: A list of logcat buffers to display. By default logcat uses only themain
system buffer. See the Android documentation for logcat buffers for more information.device
: Specifies the device this profile is intended for. Valid values: True (connect to first available device), or a string with the serial ID of the device as reported byadb devices
emulator
: Similar todevice
, but providingTrue
connects to the first available emulator instead.filters
: A list or tuple of custom filters.format
: The logcat format to use. By default logcat uses thebrief
format. See the Android documentation for logcat formats for more information.name
: The profile name (required).priorities
: A list or tuple of priority levels. logcat-color will exclude any messages that contain priorities not in this list. Valid priorities:V
(verbose),D
(debug),I
(info),W
(warn),E
(error),F
(fatal).tags
: A list, tuple, or dict of logcat tag names. logcat-color will exclude any messages that contain tags not in this list. When a dict is used, you can also assign custom colors to each tag. Valid tag colors:RED
,GREEN
,YELLOW
,BLUE
,MAGENTA
,CYAN
,WHITE
wrap
: Whether or not to wrap the message column. Default isTrue
.
Here is an extended example:
Profile(name = "radio",
# Specify a custom device
device = "device_name",
# Enable both radio and main buffers (-b radio -b main)
buffers = ("radio", "main"),
# Only pay attention to the RIL and RILC tags, and give them custom colors
tags = {
"RIL": BLUE,
"RILC": GREEN
},
# Only look at these priority levels
priorities = ("I", "W", "E"),
# Use threadtime format to get date/time stamps and thread IDs
format = "threadtime",
# Some custom filters
filters = (
r"My Custom Regex",
lambda data: data["message"] == "Custom filter"
)
)
Filters allow your profile to have complete control over what log data you actually see when you run logcat-color.
logcat-color will run each line of log output through the list of filters in your profile. Only when the entire list of filters have accepted the line will it actually be displayed. This is the equivalent of logically ANDing the results of each filter. If you require different logic, you should use a custom function filter, and combine the results of various filters manually.
There are currently two different kinds of filters:
When the regex matches the message portion of a line of logcat output, that line will then be matched against the next filter. For example:
# A negated regex -- exclude any line that matches this
def negatedRegex(regex):
return r"^(?!.*" + regex + ").*$"
Profile(...
filters = (negatedRegex(r"debugging: "), r"my custom regex")
)
When the function returns True
for a line of log output, that line will then
be matched against the next filter. The function will be passed a data
dictionary that contains all of the log data:
"priority"
: One of the logcat priorities:V
(verbose),D
(debug),I
(info),W
(warn),E
(error),F
(fatal). Availability: All logcat formats."message"
: The log message itself Availability: All logcat formats."tag"
: The Tag of this log message. Availability: All logcat formats exceptthread
."pid"
: The PID of the process that logged the message (in string form). Availability: All logcat formats excepttag
."tid"
: The ID of the thread that logged the message (in string form). Availability:thread
,threadtime
, andlong
formats."date"
: The date of the log message (in string form). Availability:time
,threadtime
, andlong
formats."time"
: The time of the log message (in string form). Availability:time
,threadtime
, andlong
formats.
Notice that many of these fields are conditional based on the logcat output format. Be careful when constructing the logic of function filters, as the field you are filtering may not exist in the message!
An example of a function filter:
# only include messages from my app's tags
def onlyMyApp(data):
# Tag isn't available in "thread" format, so use get() to be safe and
# return None instead of raising an exception
return data.get("tag") in ("MyAppTag1", "MyAppTag2")
Profile(...
filters = (onlyMyApp)
)
Thanks to Jeff Sharkey for the original script that logcat-color is based on, coloredlogcat.py.