Pinned Repositories
Configurations
Configurations for Marlin Firmware
F4xx-SIM480x320-DMCBANE
STM32F446 or GD32F4xx [V2.18.0] {XY2-PRO, XY2_PRO_2E, XY2_PRO_3E, X5SA, X5SA_g, X5SA_MINI, X5SA_PRO, X5SA_2E, X5SA_PRO_3E, X5SA400, X5SA400_PRO, X5SA400_2E, X5SA500_2E, VEHO500, VEHO500_2E, XY3-PRO, XY3_PB, XY3-PRO-V2, XY3SE, XY3SE_2E, XY3SE_V2, D01, D01_PLUS, VEHO600, VEHO600_2E, C2}
kiauh
Klipper Installation And Update Helper
Klipper-for-TronXY-X5SA-stm32f446-mainboard
Simple guide for installing Klipper on your TronXY X5SA with an STM32F446 chip
KlipperWrt
A guide to install Klipper with fluidd, Mainsail or Duet-Web-Control and webcam stream in OpenWrt. Mainly created around the Creality Wi-Fi box but any OpenWrt running device with similar specs will work just fine.
Marlin
Optimized firmware for RepRap 3D printers based on the Arduino platform.
MKS-SKIPR
MKS SKIPR is an all-in-one board launched by Makerbase for running Klipper. It integrates the RK3328 SOC running the Klipper host and the STM32F407VET6 MCU responsible for executing specific machine actions. It meets the use of most 3D printers.
Print-Tuning-Guide
tronxy_x5sa_voron
yetiwerx
Config files for my GitHub profile.
yetiwerx's Repositories
yetiwerx/Configurations
Configurations for Marlin Firmware
yetiwerx/F4xx-SIM480x320-DMCBANE
STM32F446 or GD32F4xx [V2.18.0] {XY2-PRO, XY2_PRO_2E, XY2_PRO_3E, X5SA, X5SA_g, X5SA_MINI, X5SA_PRO, X5SA_2E, X5SA_PRO_3E, X5SA400, X5SA400_PRO, X5SA400_2E, X5SA500_2E, VEHO500, VEHO500_2E, XY3-PRO, XY3_PB, XY3-PRO-V2, XY3SE, XY3SE_2E, XY3SE_V2, D01, D01_PLUS, VEHO600, VEHO600_2E, C2}
yetiwerx/kiauh
Klipper Installation And Update Helper
yetiwerx/Klipper-for-TronXY-X5SA-stm32f446-mainboard
Simple guide for installing Klipper on your TronXY X5SA with an STM32F446 chip
yetiwerx/KlipperWrt
A guide to install Klipper with fluidd, Mainsail or Duet-Web-Control and webcam stream in OpenWrt. Mainly created around the Creality Wi-Fi box but any OpenWrt running device with similar specs will work just fine.
yetiwerx/Marlin
Optimized firmware for RepRap 3D printers based on the Arduino platform.
yetiwerx/MKS-SKIPR
MKS SKIPR is an all-in-one board launched by Makerbase for running Klipper. It integrates the RK3328 SOC running the Klipper host and the STM32F407VET6 MCU responsible for executing specific machine actions. It meets the use of most 3D printers.
yetiwerx/Print-Tuning-Guide
yetiwerx/tronxy_x5sa_voron
yetiwerx/yetiwerx
Config files for my GitHub profile.