crandalf

TL;DR If you want to do the reverse dependency check on your package, you can edit the Github Action rev-check.yaml (Github will automatically fork the repo for you since you don't have write permission to my repo): change the repository from yihui/knitr to your username/repo, and follow the Github guide to create a pull request. The check results will be available in Github Actions.

The idea

There are a lot of things to check before you submit an R package to CRAN, and the last thing is probably to make sure your new version will not break any existing packages on CRAN, otherwise you may hear Gandalf tell you that "You shall not pass."

The way to make sure your new version will not break packages that depend on your package is to run reverse dependency checks. The basic idea is the following:

Install the new version (development version) of your package, and run R CMD check on all packages that depend on yours. In theory, all these checks should pass. If that's the case, you are good to go.
If any of your reverse dependency fails to pass the check, there are two possible reasons:
1. A certain change that you made in the new version broke it. For this case, you should either undo the change, or contact the maintainer of the reverse dependency and see if they'd like to change their package to accommodate your (breaking) changes.
2. The reverse dependency is currently also failing on CRAN. For this case, usually you are good to go. To verify it, we can run the check again with the current CRAN version of your package. If it also fails, perhaps it is not your fault.

This repo provides a service based on Github Actions to run reverse dependency checks via xfun::rev_check(), which is one implementation of the above idea. Features include:

The checks are run on macOS, and it will try to automatically install system dependencies for R packages via Homebrew (thanks to sysreqsdb).
It uses the LaTeX distribution TinyTeX, which means missing LaTeX packages will be automatically installed, including those used in package vignettes.

Caveats

Note that this service has two caveats:

It will try its best to install as many packages required by the checks as possible, but it doesn't guarantee all can be installed.
Currently it only installs CRAN packages but not packages from other repositories. This may change in the future.

As a result, even if your package passes the checks, it does not guarantee that all reverse dependencies would not be broken, because some of them may not have been checked. Even with a subset of reverse dependencies checked, this service may help you discover potential problems without you running all the checks locally.

The option xfun.rev_check.sample = Inf in .Rprofile means that all soft reverse dependencies are checked. Here "soft" means packages that list your package in their Suggests or Enhances field in the DESCRIPTION file. This number indicates the number of soft reverse dependencies that you want to check (they will be randomly sampled). If you do not want to check them at all, set this option to 0.

Debugging

When the checks for any reverse dependencies fail, the Github action run will have an artifact macOS-rev-check-results for you to download (see this example). It contains the R CMD check logs of failed packages as well as an HTML file 00check_diff.html, which contains a summary of the failed checks, indicating the errors caused by the new version of the package (compared to its CRAN version).

Rechecking

After you fix the problems revealed by the initial check and push to the Github repo of your package, you can add a recheck file to the root directory of this repo. In this file, you specify the names of packages that you want to recheck. This may save you some time by skipping checking packages that have been checked and have passed last time. However, please note that your fix might break those passed packages. To be conservative, you can always check the full list of reverse dependencies, which can just be time-consuming for a package that has a large number of reverse dependencies.

Timeout

When your package has a large number of reverse dependencies, the job may take longer than six hours to finish, which will lead to timeout. To solve this problem, you have to split the reverse dependencies into batches and run the checks in different jobs.

Fork this repo, go to Settings -> Actions and allow all actions in your forked repo.
Clone the forked repo. Change the repository in .github/workflows/rev-check.yaml to your package repo that you want to check (e.g., therneau/survival). Commit and push to your repo. Wait for the action to finish, which will cache the reverse dependencies and their dependencies. This can save quite a bit of R package installation time in the future.
Install the latest version of xfun. You may need to restart R after the installation.
Run xfun::crandalf_check("PKG") where PKG is your package name (e.g., survival). This function will split the reverse dependencies into batches if necessary. From my experience, checking a package takes about one or two minutes on average. You are likely to hit the timeout if you need to check more than 400 packages, so the batch size for xfun::crandalf_check() is 400 by default, but you can change it.
Run xfun::crandalf_results("PKG") and wait for all jobs to finish, which can take roughly N / 5 * 6 hours where N is the number of batches. For example, if you have 4000 reverse dependencies to check, they will be checked in 4000 / 400 = 10 batches, and may take 10 / 5 * 6 = 12 hours.

Run `xfun::rev_check()` locally

You can also run xfun::rev_check() locally in this repo. The help page ?xfun::rev_check has more information on its usage. Basically, you need to pass the package name and the path of its development version to this function, e.g.,

xfun::rev_check('knitr', src = '~/Downloads/repo/knitr')

If you want to run xfun::rev_check() locally in this repo, please note that it will create an R library at ~/R-tmp, which will be used to install reverse dependencies and their dependencies (which you probably don't use routinely, so a dedicated path ~/R-tmp is used instead of the usual .libPaths()). Other than that, all file I/O will only occur inside this repo.

Related work

If you want to check revdeps in your own repo instead of this repo, you may use the Github action r-devel/recheck.yml.

yihui/crandalf