lolMiner 1.35 For a short introduction how to mine using lolMiner, see https://github.com/Lolliedieb/lolMiner-releases/wiki Also have a look to the mine_coin.bat or mine_coin.sh files which can be used as starting point to run lolMiner on the command line. Here is a list of the most relevant parameters for lolMiner: General: -h [ --help ] Help screen --config arg (=./lolMiner.cfg) Config file --json arg (=./user_config.json) Config file in Json format --profile arg Profile to load from Json file --nocolor [=arg(=on)] (=off) Disable colors in output --basecolor [=arg(=on)] (=off) Use 16 colors scheme for non-rgb terminals --list-coins List all supported coin profiles --list-algos List all supported algorithms --list-devices List all supported & detected GPUs in your system -v [ --version ] Print lolMiner version number Mining: -c [ --coin ] arg The coin to mine -a [ --algo ] arg The algorithm to mine. This is an alternative to --coin. -p [ --pool ] arg Mining pool to mine on Format: <pool>:<port> -u [ --user ] arg Wallet or pool user account to mine on --pass arg Pool user account password (Optional) --tls arg Toggle TLS ("on" / "off") --devices arg The devices to mine on Values: ALL / AMD / NVIDIA or a comma separated list of indexces. --devicesbypcie [=arg(=on)] (=off) Interpret --devices as list of PCIE BUS:SLOT pair --pers arg The personalization string. Required when using --algo for Equihash algorithms --keepfree arg (=5) Set the number of MBytes of GPU memory that should be left free by the miner. --benchmark arg The algorithm to benchmark Managing Options: --singlethread [=arg(=-1)] (=-2) Enable single mining thread mode for all GPUs (-1) or for a specific GPU id. --tstart arg (=0) Minimal temperature for a GPU to start in degree C. If set to 0 disables restart below a fixed temperature. --tstop arg (=0) Temperature to pause or stop a GPU from mining in degree C. If set to 0 disables stop above a fixed temperature. --tmode arg (=edge) Mode for temperature management. Use "edge" (default), "junction" or "memory" to set the mode for temperature management. Statistics: --apiport arg (=0) The port the API will use --longstats arg (=150) Long statistics interval --shortstats arg (=30) Short statistics interval --digits arg Number of digits in hash speed after delimiter --timeprint [=arg(=on)] (=off) Enables time stamp on short statistics ("on" / "off") --compactaccept [=arg(=on)] (=off) Enables compact accept notification --log [=arg(=on)] Enables printing a log file ("on" / "off") --logfile arg Path to a custom log file location Ethash Options: --ethstratum arg (=ETHPROXY) Ethash stratum mode. Available options: ETHV1: EthereumStratum/1.0.0 (Nicehash) ETHPROXY: Ethereum Proxy --worker arg (=eth1.0) Separate worker name for Ethereum Proxy stratum mode. --4g-alloc-size arg (=0) Sets the DAG size (in MByte) the miner is allowed to use on 4G cards. Can be a comma separated list of values for each card. Suggested values: Linux: 4080 Windows: 4024 --zombie-tune arg (=0) Sets the Zomie tune mode (0-3) for Polaris GPUs. Can be a comma separated list of values to set for each card individually. --dagdelay [=arg(=0)] (=-1) Delay between creating the DAG buffers for the GPUs. Negative values enable parallel generation (default). --enablezilcache [=arg(=1)] (=0) Allows 8G+ GPUs to store the DAG for mining Zilliqa. It will generated only once and offers a faster switching. --benchepoch arg (=350) The DAG epoch the denchmark mode will use Ethash Expert Options: --workmulti arg (=180) Modifys the amount of Ethash work a GPU does per batch. --rebuild-defect arg (=3) Triggers a DAG rebuild if a card produced <param> defect shares. Default is 3, use 0 to deactivate the rebuild. --enable-ecip1099 [=arg(=on)] (=off) Enable reduced DAG size for mining ETC from block 11.730.000 and higher. --disableLinux56fix [=arg(=on)] (=off) Disables the startup workaround for Polaris GPUs on Linux kernel 5.6. --win4galloc [=arg(=1)] (=0) Enables (1) / Disables (0) experimental 4G DAG allocation mode on Windows.