Netbox agent

This project aims to create hardware automatically into Netbox based on standard tools (dmidecode, lldpd, parsing /sys/, etc).

The goal is to generate an existing infrastructure on Netbox and have the ability to update it regularly by executing the agent.

Features

Create virtual machines, servers, chassis and blade through standard tools (dmidecode)
Create physical, bonding and vlan network interfaces with IPs (IPv4 & IPv6)
Create IPMI interface if found
Create or get existing VLAN and associate it to interfaces
Generic ability to guess datacenters and rack location through drivers (cmd and file and custom ones)
Update existing Device and Interface
Handle blade moving (new slot, new chassis)
Handle blade GPU expansions
Automatic cabling (server's interface to switch's interface) using lldp
Local inventory using Inventory Item for CPU, GPU, RAM, RAID cards, physical disks (behind raid cards)
PSUs creation and power consumption reporting (based on vendor's tools)

Requirements

Netbox >= 2.6
Python >= 3.4
pynetbox
python3-netaddr
python3-netifaces
jsonargparse
ethtool
dmidecode
ipmitool
lldpd
lshw

Inventory requirement

hpassacli
storcli
omreport

Installation

# pip3 install netbox-agent

Usage

The agent can be run from a shell and get its configuration from either the configuration file or environment variables.

Configuration values are overridden based on the following precedence: command line arguments (might include config file) > environment variables > default config file > defaults.

# netbox_agent -c /etc/netbox_agent.yaml --register
INFO:root:Creating chassis blade (serial: QTFCQ574502EF)
INFO:root:Creating blade (serial: QTFCQ574502D2) myserver on chassis QTFCQ574502EF
INFO:root:Setting device (QTFCQ574502D2) new slot on Slot 9 (Chassis QTFCQ574502EF)..
INFO:root:Interface a8:1e:84:f2:9e:6a not found, creating..
INFO:root:Creating NIC enp1s0f1 (a8:1e:84:f2:9e:6a) on myserver
INFO:root:Interface 02:42:7a:89:cf:a4 not found, creating..
INFO:root:Creating NIC br-07ea1e4a2f0e (02:42:7a:89:cf:a4) on myserver
INFO:root:Create new IP 172.19.0.1/16 on br-07ea1e4a2f0e
INFO:root:Interface a8:1e:84:f2:9e:69 not found, creating..
INFO:root:Creating NIC enp1s0f0 (a8:1e:84:f2:9e:69) on myserver
INFO:root:Create new IP 42.42.42.42/24 on enp1s0f0
INFO:root:Create new IP fe80::aa1e:84ff:fef2:9e69/64 on enp1s0f0
INFO:root:Interface a8:1e:84:cd:9d:d6 not found, creating..
INFO:root:Creating NIC IPMI (a8:1e:84:cd:9d:d6) on myserver
INFO:root:Create new IP 10.191.122.10/24 on IPMI

If you need, you can update only specific informations like:

Network
Inventory
Location
PSUs

# ip a add 42.42.42.43/24 dev enp1s0f1
# netbox_agent -c /etc/netbox_agent.yaml --update-network
INFO:root:Create new IP 42.42.42.43/24 on enp1s0f1
# netbox_agent --update-inventory
INFO:root:Creating Disk Samsung SSD 850 S2RBNX0K101698D

Configuration

# Netbox configuration
netbox:
 url: 'http://netbox.internal.company.com'
 token: supersecrettoken
 # uncomment to disable ssl verification
 # ssl_verify: false
 # uncomment to use the system's CA certificates
 # ssl_ca_certs_file: /etc/ssl/certs/ca-certificates.crt

# Network configuration
network:
  # Regex to ignore interfaces
  ignore_interfaces: "(dummy.*|docker.*)"
  # Regex to ignore IP addresses
  ignore_ips: (127\.0\.0\..*)
  # enable auto-cabling by parsing LLDP answers
  lldp: true

#
# You can use these to change the Netbox roles.
# These are the defaults.
#
#device:
# chassis_role: "Server Chassis"
# blade_role: "Blade"
# server_role: "Server"
# tags: server, blade, ,just a comma,delimited,list
# custom_fields: field1=value1,field2=value2#
#
# Can use this to set the tenant
#
#tenant:
# driver: "file:/tmp/tenant"
# regex: "(.*)"

## Enable virtual machine support
# virtual:
#   # not mandatory, can be guessed
#   enabled: True
#   # see https://netbox.company.com/virtualization/clusters/
#   cluster_name: my_vm_cluster

# Enable datacenter location feature in Netbox
datacenter_location:
 driver: "cmd:cat /etc/qualification | tr [A-Z] [a-z]"
 regex: "datacenter: (?P<datacenter>[A-Za-z0-9]+)"
# driver: 'cmd:lldpctl'
# regex: 'SysName: .*\.([A-Za-z0-9]+)'
#
# driver: "file:/tmp/datacenter"
# regex: "(.*)"

# Enable rack location feature in Netbox
rack_location:
# driver: 'cmd:lldpctl'
# match SysName: sw-dist-a1.dc42
# regex: 'SysName:[ ]+[A-Za-z]+-[A-Za-z]+-([A-Za-z0-9]+)'
#
# driver: "file:/tmp/datacenter"
# regex: "(.*)"

# Enable local inventory reporting
inventory: true

Specific workflow

Blades

Each vendor class has a is_blade method which is later used for Device creation using the Netbox parent/child feature.

The get_blade_slot method return the name of the Device Bay.

Certain vendors don't report the blade slot in dmidecode, so we can use the slot_location regex feature of the configuration file.

Some blade servers can be equipped with additional hardware using expansion blades, next to the processing blade, such as GPU expansion, or drives bay expansion. By default, the hardware from the expnasion is associated with the blade server itself, but it's possible to register the expansion as its own device using the --expansion-as-device command line parameter, or by setting expansion_as_device to true in the configuration file.

Drives attributes processing

It is possible to process drives extended attributes such as the drive's physical or logical identifier, logical drive RAID type, size, consistency and so on.

Those attributes as set as custom_fields in Netbox, and need to be registered properly before being able to specify them during the inventory phase.

As the custom fields have to be created prior being able to register the disks extended attributes, this feature is only activated using the --process-virtual-drives command line parameter, or by setting process_virtual_drives to true in the configuration file.

The custom fields to create as DCIM > inventory item Text are described below.

NAME            LABEL                      DESCRIPTION
mount_point     Mount point                Device mount point(s)
pd_identifier   Physical disk identifier   Physical disk identifier in the RAID controller
vd_array        Virtual drive array        Virtual drive array the disk is member of
vd_consistency  Virtual drive consistency  Virtual disk array consistency
vd_device       Virtual drive device       Virtual drive system device
vd_raid_type    Virtual drive RAID         Virtual drive array RAID type
vd_size         Virtual drive size         Virtual drive array size

In the current implementation, the disks attributes ore not updated: if a disk with the correct serial number is found, it's sufficient to consider it as up to date.

To force the reprocessing of the disks extended attributes, the --force-disk-refresh command line option can be used: it removes all existing disks to before populating them with the correct parsing. Unless this option is specified, the extended attributes won't be modified unless a disk is replaced.

It is possible to dump the physical/virtual disks map on the filesystem under the JSON notation to ease or automate disks management. The file path has to be provided using the --dump-disks-map command line parameter.

Anycast IP

The default behavior of the agent is to assign an interface to an IP. So two servers with anycasted IPs, running update mode, would only trigger IP's interface assignement in a loop.

In order to handle this case, user need to set Netbox IP's mode to Anycast so that the agent will create another one if it's present on another server.

Hardware

Tested on:

Virtual Machines

Hyper-V
VMWare
VirtualBox
AWS
GCP

Dell Inc.

Blades

PowerEdge MX7000
PowerEdge M1000e (your DeviceType should have slots named Slot 01 and so on)
PowerEdge MX740c
PowerEdge M640
PowerEdge M630
PowerEdge M620
PowerEdge M610

Pizzas

DSS7500

HP / HPE

Blades

HP BladeSystem c7000 Enclosure G2 / G3 (your DeviceType should have slots named Bay 1 and so on)
HP ProLiant BL460c Gen8
HP ProLiant BL460c Gen9
HP ProLiant BL460c Gen10
HP ProLiant BL460c Gen10 Graphics Exp its expansion HP ProLiant BL460c Graphics Expansion Blade
HP Moonshot 1500 Enclosure (your DeviceType should have slots batch create with Bay c[1-45n1]) with HP ProLiant m750, m710x, m510 Server Cartridge

Pizzas

ProLiant DL380p Gen8
ProLiant SL4540 Gen8
ProLiant SL4540 Gen9
ProLiant XL450 Gen10

Supermicro

Blades

SBI-* and SBA-* should be supported, but I need dmidecode output example to support automatic blade location

Pizzas

SSG-6028R
SYS-6018R

QCT

Blades

QuantaMicro X10E-9N

Pizzas

Nothing ATM, feel free to send me a dmidecode or make a PR!

Known limitations

The project is only compatible with Linux. Since it uses ethtool and parses /sys/ directory, it's not compatible with *BSD distributions.
Netbox >=2.6.0,<=2.6.2 has a caching problem ; if the cache lifetime is too high, the script can get stale data after modification. We advise to set CACHE_TIME to 0.

Developing

If you want to run the agent while adding features or just for debugging purposes

# git clone https://github.com/Solvik/netbox-agent.git
# cd netbox-agent
# python3 -m netbox_agent.cli --register

On a personal note, I use the docker image from netbox-community/netbox-docker

# git clone https://github.com/netbox-community/netbox-docker
# cd netbox-docker
# docker-compose pull
# docker-compose up

ypid/netbox-agent

Netbox agent

Features

Requirements

Inventory requirement

Installation

Usage

Configuration

Specific workflow

Blades

Drives attributes processing

Anycast IP

Hardware

Virtual Machines

Dell Inc.

Blades

Pizzas

HP / HPE

Blades

Pizzas

Supermicro

Blades

Pizzas

QCT

Blades

Pizzas

Known limitations

Developing