/obd2

Reading OBD2 PIDS with ELM327 device

Primary LanguageC

#OBD2 data scanner

Using ELM 327 OBD2 port to usb (v1.5; clone)

CAN to Serial kernel module driver provided by https://github.com/norly/elmcan

Instructions to use ELM 327 as a CAN interface

git clone https://github.com/norly/elmcan

cd elmcan/modules

sudo make all #note linux-headers package must be installed on your system

sudo modprobe can-dev

sudo insmod elmcan.ko

./attach-me.sh /dev/ttyUSB0 #leave terminal open; start new terminal

sudo ip link set can0 up type can bitrate 500000 restart-ms 10

use can-utils candum to test connection