/Lenovo-Thinkpad-X250-Hackintosh

This repo contains Backup EFI files required to get Big Sur hackintosh or later and older version which works perfectly on Brodwell (5th gen) X250. Everything is stable and works as described in the Readme.

ROG-STRIX-G513QC

Lenovo ThinkPad X250

OpenCore Config for Lenovo ThinkPad X250 🍏



img



Disclaimer ⚠️

This EFI is based in olarila and exxncss repository, go and support them. This repository couldn't be done without their work any suggestion is acepted to improve the files.

Configuration

Category Details
CPU Intel Core i5-5300U
GPU Intel HD Graphics 5500
Memory Kingston 8GB DDR3L
Storage 1 256GB Midasforce M2.2242 SSD
Storage 2 512GB Toshiba HDD Sata
Wifi Intel AC-7265 Dual Band + Bluetooth

Screenshot


V E N T U R A 13.6.4



Warning

When installing or updating the system, be sure to make sure and replace some kext that matches your macOS version, otherwise, some components will not run properly.


Download the MacOS installation at the following link, Download Here, Or download it from the macOS terminal directly by following this guide osxdaily

☑️ Tested

  • sonoma (Tested, OpenCore, 8GB ram is highly discouraged)
  • Ventura (Tested, OpenCore)
  • Monterey (Tested, OpenCore)
  • Bigsur (Tested, OpenCore)

🎒 Installation guide

Monterey and below

  • Clone this repo through the terminal.

    git clone https://github.com/zamkara/Lenovo-Thinkpad-X250-Hackintosh.git
    
  • Download Wireless Kernel Extension from Bluetooth & itlwm then place it in the $source/EFI/OC/Kexts directory, be sure to download Airportitlwm for the appropriate macOS version or use itlwm for all macOS versions.

  • Update the config to register the kext that was added to the folder using OCAuxiliaryTools or Opencore configurator.

  • Place the EFI on the EFI Bootable partition of the macOS installer that was prepared earlier.

Ventura and above

  • The EFI I built cannot boot (used for installing the OS) on Ventura and later versions. It will only work when the system is patched using OCLP. For the OS installation, you will need a different EFI from Olarila.

  • Download the Olarila EFI and add the Kexts from the released EFI in this repository. Don't forget to change the SMBIOS Model to a 2019 model or any other supported model.

  • Perform the OS installation using the customized EFI, and apply the patch using OCLP. Once done, replace the EFI with the one you can clone from this repository.

  • After patching you can use the EFI from this repo for more functionality.

You may encounter problems when granting certain permissions to apps on Ventura or above, I suggest you use Allowme.

Bios setup

  • Security -> Security Chip: Disabled;
  • Memory Protection -> Execution Prevention: Enabled;
  • Virtualization -> Intel Virtualization Technology: Enabled;
  • Virtualization -> Vt-directed IO: Disabled;
  • Internal Device Access -> Bottom Cover Tamper Detection: must be Disabled;
  • Anti-Theft -> Computrace -> Current Setting: Disabled;
  • Secure Boot -> Secure Boot: Disabled;
  • UEFI/Legacy Boot: UEFI Only;
  • CSM Support: No.

What's Working?

  • QE/CI Intel HD Graphics 5500 BigSur Monterey Ventura
  • Power Management BigSur Monterey Ventura
  • Sleep, Shutdown, Restart BigSur Monterey Ventura
  • Audio Speaker & Earphone BigSur Monterey Ventura
  • Bluetooth BigSur Monterey Ventura
  • Trackpad, Trackball, Gestures BigSur Monterey Ventura
  • Indikator baterai BigSur Monterey Ventura
  • Camera BigSur Monterey Ventura
  • etc

Credits: