zapta/linbus

Issues

• Is a prebuilt board available anywhere?

  #37 opened 2 years ago by jbschooley
  4

• Steering wheel Lin bus

  #40 opened 7 months ago by s54b32julian
  0

• Hardware and Software question

  #32 opened 6 years ago by durante
  11

• Document that this project doesn't require custom hardware

  #38 opened a year ago by remulasce
  1

• LIN Bus slave for ESP32

  #39 opened a year ago by Alf-R
  1

• differend ID on serial port reported

  #34 opened 5 years ago by Alf-R
  1

• Obsolet parts

  #36 opened 5 years ago by DrYouu
  2

• Lin lin(master,4) and Lin lin(slave,15)

  #35 opened 5 years ago by wchpikus
  0

• lin injector do not work at all

  #33 opened 6 years ago by wchpikus
  4

• Replacement of ATA6631/ATA6625

  #27 opened 6 years ago by Yannik
  7

• Enhanced checksum is used for diagnostic frames

  #30 opened 6 years ago by Yannik
  2

• injector sources fail to compile with latest arduino software

  #29 opened 6 years ago by Yannik
  1

• Write a frame

  #28 opened 6 years ago by Thefirstalpha
  3

• Arduino and LIN

  #26 opened 6 years ago by RaakeshRaja
  1

• linbus analyzer

  #25 opened 7 years ago by doctosha
  1

• LIN bus rate

  #24 opened 7 years ago by sinurb
  3

• LIN Bus Hardware Question

  #23 opened 7 years ago by jmciver1
  3

• Signal Injector

  #17 opened 8 years ago by piripac
  15

• OSH Park differs from source

  #22 opened 7 years ago by clarkewd
  3

• Master as simple controller for windshield motor?

  #21 opened 8 years ago by hugovw1976
  5

• PCB routes?

  #20 opened 8 years ago by csmithVW
  0

• No Errors but only 1 Byte per Frame

  #19 opened 8 years ago by robin7331
  0

• Simple Bit changing

  #18 opened 8 years ago by mcbethchris
  1

• Linbus frame

  #7 opened 9 years ago by alecsio
  7

• Injector Build

  #16 opened 8 years ago by tjb8907
  3

• TJA1021

  #15 opened 9 years ago by JEFMARTINS
  1

• Different LIN transceiver

  #10 opened 9 years ago by slabiak
  7

• Licence for hardware

  #9 opened 9 years ago by domonoky
  1

• Injector sources not compile

  #8 opened 9 years ago by gioreva
  7

• ATA6631 to ATA6625

  #5 opened 9 years ago by nook-scheel
  4

• Arduino 1.6.5

  #6 opened 9 years ago by alecsio
  1

• Analyzer not reading LIN messages

  #3 opened 10 years ago by k3torres
  24

• arduino due vs LIN

  #4 opened 10 years ago by AndreaAcate
  0

• BOM, schematic

  #2 opened 11 years ago by bootstrap18
  8