/JLink-V9-mini

thie is a common tool for Cortex-M series MCU debugging , enjoy it!

Primary LanguageBatchfile

JLink-V9-mini

this is a common tool for Cortex-M series MCU debugging , enjoy it!

High Speed Flashing!!! up to 12MHz

A-side

Have a look:

A-side

B-side

How To Use

  1. Clone this repository

    git clone https://github.com/SWUST-ESLAB/JLink-V9-mini.git

  2. Modify the Pcb & Sch files as you wish!

    1. PCB assembled

  3. Flash Bootloader

    • start J-Flash V6.34
    • open project : bootloader.jflash
    • click connect button at Target Tab
    • click Production Programming button at Target Tab
    • re-plug your JLINK and configure it in J-Link Commander
    • when you open J-Link commander , you will be asked for upload your firmware, click Yes
    • configure your J-Link via those commands

  4. Configure your JLINK-V9

    Environment：JLINK V6.34

    Run the following commands in sequence under JLINK command

    Exec SetSN=29534567      ;Add SN v9.5
Exec AddFeature GDB      ;Add GDB 
Exec AddFeature RDI      ;Add RDI 
Exec AddFeature FlashBP  ;Add FlashBP  
Exec AddFeature FlashDL  ;Add FlashDL 
Exec AddFeature JFlash   ;Add JFlash 
Exec AddFeature RDDI     ;Add RDDI
vcom enable              ;Enable VCOM

    other version of SN

    Exec SetSN=20281318 V9.2
Exec SetSN=20381318 V9.3
Exec SetSN=20481318 V9.4
Exec SetSN=20581318 V9.5
Exec SetSN=20681318 V9.6
Exec SetSN=20781318 V9.7