Weston Robot Platform SDK

Introduction

Supported platforms

Scout: skid-steer mobile base
Hunter: ackermann mobile base

This software packages provides a C++ interface to communicate with the mobile platforms from Weston Robot, for sending commands to the robot and acquiring the latest robot state. The SDK works on both x86 and ARM platforms.

Generally, you only need to instantiate an object of the robot base class (such as ScoutBase), then use the object to programmatically control the robot. Internally, the base class manages two background threads, one to process CAN/UART messages of the robot state and accordingly update state variables in the robot state data structure, and the other to maintain a 50Hz loop and send the latest command to the robot base. User can iteratively perform tasks in the main thread and check the robot state or set control commands.

Refer to "src/apps" for examples.

Hardware Interface

Setup CAN-To-USB adapter

Enable gs_usb kernel module
```
$ sudo modprobe gs_usb
```

Bringup can device

$ sudo ip link set can0 up type can bitrate 500000

If no error occured during the previous steps, you should be able to see the can device now by using command
```
$ ifconfig -a
```
Install and use can-utils to test the hardware
```
$ sudo apt install can-utils
```

Testing command

# receiving data from can0
$ candump can0
# send data to can0
$ cansend can0 001#1122334455667788

Two scripts inside the "./scripts" folder are provided for easy setup. You can run "./setup_can2usb.bash" for the first-time setup and run "./bringup_can2usb.bash" to bring up the device each time you unplug and re-plug the adapter.

Setup UART

Generally your UART2USB cable should be automatically recognized as "/dev/ttyUSB0" or something similar and ready for use. If you get the error "... permission denied ..." when trying to open the port, you need to grant access of the port to your user accout:

$ sudo usermod -a -G dialout $USER

You need to re-login to get the change to take effect.

Build SDK

Install dependent libraries

$ sudo apt install build-essential cmake
$ sudo apt install libasio-dev

I. Use the package with ROS

$ cd <your-catkin-ws>/src
$ git clone https://github.com/westonrobot/wrp_sdk.git
$ cd ..
$ catkin_make

II. Use the package without ROS

If you want to build the TUI monitor tool, additionally install libncurses

$ sudo apt install libncurses5-dev

Configure and build

$ cd wrp_sdk 
$ mkdir build
$ cd build
$ cmake ..
$ make

Run Demo Apps

The demo code expects one parameter for the CAN bus mode.

$ ./app_scout_demo can0

Both the port name and baud rate need to be provided when using the RS232 interface.

$./app_scout_demo /dev/ttyUSB0 115200

If you've installed "libncurses5-dev" and built "app_scout_monitor", you can run it in a similar way:

$ ./app_scout_monitor can0

$./app_scout_monitor /dev/ttyUSB0 115200

Note: the monitor app is not built by default if you use this SDK with ROS.

Known Limitations

Reference

CAN command reference in Linux

zhangtianjia/wrp_sdk