I'm going to be taking a break from development of Taskell for a while. Trying to do it alongside my day job was proving a bit much. Feel free to continue to submit issues, but I won't be able to work on any of them immediately. Pull requests also welcome. Thanks for understanding 🙂
A CLI kanban board/task manager for Mac and Linux
- Per project task lists
vimstyle key-bindings- Stored using Markdown
- Clean diffs for easy version control
- Support for sub-tasks and due dates
- Trello board imports
- GitHub project imports
Follow @taskellcli on Twitter for updates
You can install Taskell on your Mac using Homebrew:
brew install taskellA .deb package is available for Debian/Ubuntu. Download it and install with dpkg -i <package-name>. You may also need to install the libtinfo5 package (sudo apt install libtinfo5).
Not officially supported, but try running sudo dnf install ncurses-compat-libs then download and run the binary as described below. If that doesn't work you may need to build from scratch (Cabal/Stack).
A binary is available for Mac and Debian/Ubuntu. Download it and copy it to a directory in your $PATH (e.g. /usr/local/bin or /usr/bin).
You can install Taskell with cabal:
cabal install taskellMake sure you run cabal update if you haven't run it recently.
If none of the above options work you can build taskell using Stack. First install Stack on your machine. Then clone the repo and run stack build && stack install: this will build taskell and then install it in ~/.local/bin (so make sure that directory is in your $PATH). Building from scratch can take a long time and occasionally doesn't work the first time (if this happens try running it again).
taskell: will usetaskell.mdin the pwd - offers to create if not foundtaskell filename.md: will usefilename.mdin the pwd - offers to create if not found
-h: show help-v: show version number-t <trello-board-id>: import a Trello board (see below)-g <github-project-id>: import a GitHub project (see below)
- If you're using a simple two-column "To Do" and "Done" then use the space bar to mark an item as complete while staying in the "To Do" list. If you're using a more complicated column setup then you will want to use
H/Lto move tasks between columns.
By default stores in a taskell.md file in the working directory:
## To Do
- Do this
## Done
- Do ThatTaskell includes the ability to fetch a Trello board and store it as local taskell file.
Before fetching a Trello board, you'll need to create an access token and store it in ~/.taskell/config.ini.
-
First, get a Trello token
-
Then add it to
~/.taskell/config.ini:[trello] token = <your-trello-access-token>
You can revoke access tokens on Trello
Running the following would pull down the Trello board with the ID "TRe1l0iD" into a file named trello.md and then open taskell with that file.
taskell -t TRe1l0iD trello.mdMake sure you have permission to view the Trello board, otherwise you'll get an error.
- This is a one-off procedure: it effectively imports a Trello board to taskell
- Currently imports:
- Lists
- Cards
- Card descriptions
- Card due dates
- Card checklists (merged into one list per card)
Taskell includes the ability to fetch a GitHub project and store it as local taskell file.
Before fetching a GitHub board, you'll need to create a person access token and store it in ~/.taskell/config.ini.
-
Make sure to tick the
reposcope -
Then add it to
~/.taskell/config.ini:[github] token = <your-github-personal-access-token>
You can delete personal access tokens on GitHub
Projects can belong to organisations or to individual repositories.
Make sure you have permission to view the GitHub project, otherwise you'll get an error.
To import a project for an organisation called "test-org" you would use the following:
taskell -g orgs/test-org github.mdThis would then show you a list of possible projects to import. Enter the number of the project you wish to import.
To import a project for the repository "test-repo" for the user "test-user":
taskell -g repos/test-user/test-repo github.mdThis would then show you a list of possible projects to import. Enter the number of the project you with to import.
- This is a one-off procedure: it effectively imports a GitHub project to taskell
- Currently imports:
- Columns
- Cards
Taskell uses the XDG Base Directory Specification, so it will look for an $XDG_CONFIG_HOME environmental variable and create a directory named taskell inside it. If this variable is not found it will create the taskell directory in ~/.config/. (If you've been using Taskell since <= 1.3.5 then it will be in a ~/.taskell directory, feel free to move this to the XDG directory.)
Taskell has a config.ini file:
[general]
; the default filename to create/look for
filename = taskell.md
[layout]
; top/bottom padding for the taskell window
padding = 1
; the width of a column
column_width = 30
; the padding of a column
; for both sides, so 3 would give a gap of 6 between two columns
column_padding = 3
; the icon to use when a task has a description
; the default icon may not display on all systems
description_indicator = "≡"
; whether to show the statusbar
statusbar = true
[markdown]
; the markdown to start a title line with
title = "##"
; the markdown to start a task line with
task = "-"
; the markdown to start a sub-task line with
subtask = " *"
; by default times are stored in UTC to avoid diffs if you
; change locations. Set this to true if it will always be
; edited in the same timezone
localTimes = falseMake sure that the values in the [markdown] section are surrounded by double-quotes.
If you always use sub-tasks, an alternative setup for [markdown] might be:
[markdown]
title = "##"
; each task is a header
task = "###"
; subtasks are list items under the header
subtask = "-"Warning: currently if you change your [markdown] settings any older files stored with different settings will not be readable.
You can edit the template.md config file to change what a new taskell file looks like.
You can edit keyboard bindings in the bindings.ini config file.
The default bindings can be found in bindings.ini.
Available special keys: <Space>, <Enter>, <Backspace>, <Left>, <Right>, <Up>, <Down>
On a Mac you can use the alt characters: e.g. quit = œ is equivalent to alt+q.
You shouldn't try to assign the 1-9 keys, as it will not overwrite the default behaviour.
Due dates must be input with the format YYYY-MM-DD or YYYY-MM-DD HH:MM. The date will not be accepted otherwise.
You can also pass in relative times such as 1w 2d (for 1 week and 2 days). Valid units are:
s(seconds)m(minutes)h(hours)d(days)w(weeks)
These can be used in any combination. If the time is made up only of days and/or weeks, the due date will not include a time.
By default times are stored in the Markdown file as UTC. If you would like local times (and are unlikely to open the file in lots of different timezones) then you can set localTimes to true in the markdown section of the config file. If you have this setting on and you change timezone, you'll get a diff on all your times the next time you make changes to the file.
You can edit Taskell's colour-scheme by editing theme.ini:
[other]
; list title
title.fg = green
; status bar
statusBar.bg = blue
statusBar.fg = black
; current list title
titleCurrent.fg = blue
; current task
taskCurrent.fg = magenta
; subtasks
; selected
subtaskCurrent.fg = magenta
; incomplete
subtaskIncomplete.fg = blue
; complete
subtaskComplete.fg = yellow
; disabled
disabled.fg = yellowYou can also change the background and default text colour:
[default]
; the app background colour
default.bg = brightBlack
; the app text colour
default.fg = whiteThe available colours are: black, red, green, yellow, blue, magenta, cyan, white, brightBlack, brightRed, brightGreen, brightYellow, brightBlue, brightMagenta, brightCyan, brightWhite, or default
See roadmap.md for planned features
Please check the roadmap.md before adding any bugs/feature requests to Issues.
Anyone is welcome to contribute to the project, but please read through CONTRIBUTING.md and make sure that you agree with the Code of Conduct before getting involved.
- Mark Wales (@smallhadroncollider)
- Ali Ahmed (@AliNisarAhmed)
Built using Brick. Thanks to Jonathan Daugherty for answering all my questions and pointing me in the right direction. Also thanks to Jack Leigh and Thom Wright for helping me get started. Also thanks to Katja Durrani for submitting Taskell to homebrew-core.