This thing’s primary use is to build Windows binaries of mpv.
Alternatively, you can download the builds from here.
-
You should also install Ninja and use CMake’s Ninja build file generator. It’s not only much faster than GNU Make, but also far less error-prone, which is important for this project because CMake’s ExternalProject module tends to generate makefiles which confuse GNU Make’s jobserver thingy.
-
As a build environment, any modern Linux distribution should work.
-
Compiling on Cygwin / MSYS2 is supported, but it tends to be slower than compiling on Linux.
These packages need to be installed first before compiling mpv:
pacman -S git gyp mercurial subversion ninja cmake meson ragel yasm nasm asciidoc enca gperf unzip p7zip gcc-multilib clang lld libc++ libc++abi python-pip curl lib32-gcc-libs lib32-glib2 mimalloc ccache
pip3 install rst2pdf mako jsonschema
pacman -S llvm # needed for building LLVM PGO
apt-get install build-essential checkinstall bison flex gettext git mercurial subversion ninja-build gyp cmake yasm nasm automake pkgconf libtool libtool-bin gcc-multilib g++-multilib clang lld libc++1 libc++abi1 libgmp-dev libmpfr-dev libmpc-dev libgcrypt-dev gperf ragel texinfo autopoint re2c asciidoc python3-pip docbook2x unzip p7zip-full curl mimalloc ccache
pip3 install rst2pdf meson mako jsonschema
Note:
- Use apt-fast if apt-get is too slow.
- It is advised to use bash over dash. Set
sudo ln -sf /bin/bash /bin/sh. Revert back bysudo ln -sf /bin/dash /bin/sh. - On WSL platform, compiling 32bit requires qemu. Refer to this.
- To update package installed by pip, run
pip3 install <package> --upgrade.
Download Cygwin installer and run:
setup-x86_64.exe -R "C:\cygwin64" -q --packages="bash,binutils,bzip2,cygwin,gcc-core,gcc-g++,cygwin32-gcc-core,cygwin32-gcc-g++,gzip,m4,pkgconf,make,unzip,zip,diffutils,wget,git,patch,cmake,gperf,yasm,enca,asciidoc,bison,flex,gettext-devel,mercurial,python-devel,python-docutils,docbook2X,texinfo,libmpfr-devel,libgmp-devel,libmpc-devel,libtool,autoconf2.5,automake,automake1.9,libxml2-devel,libxslt-devel,meson,libunistring5"
Additionally, some packages, re2c, ninja, ragel, gyp, rst2pdf, nasm need to be installed manually.
Install MSYS2 and run it via MSYS2 MSYS shortcut.
Don't use MSYS2 MinGW 32-bit or MSYS2 MinGW 64-bit shortcuts, that's important!
These packages need to be installed first before compiling mpv:
pacman -S base-devel cmake gcc yasm nasm git mercurial subversion gyp tar gmp-devel mpc-devel mpfr-devel python zlib-devel unzip zip p7zip meson libunistring5
Don't install anything from the mingw32 and mingw64 repositories,
it's better to completely disable them in /etc/pacman.conf just to be safe.
Additionally, some packages, re2c, ninja, ragel, libjpeg, rst2pdf, jinja2 need to be installed manually.
Example:
cmake -DTARGET_ARCH=x86_64-w64-mingw32 \
-DGCC_ARCH=x86-64-v3 \
-DSINGLE_SOURCE_LOCATION="/home/user/packages" \
-DRUSTUP_LOCATION="/home/user/install_rustup" \
-G Ninja -B build64 -S mpv-winbuild-cmake
This cmake command will create build64 folder for x86_64-w64-mingw32. Set -DTARGET_ARCH=i686-w64-mingw32 for compiling 32-bit.
-DGCC_ARCH=x86-64-v3 will set -march option when compiling gcc with x86-64-v3 instructions. Other value like native, znver3 should work too.
Enter build64 folder and build toolchain once. By default, it will be installed in install folder.
ninja download # download all packages at once (optional)
ninja gcc # build gcc only once (take around ~20 minutes)
ninja mpv # build mpv and all its dependencies
On WSL2, you might see it stuck with 100% disk usage and never finished. See below.
The final build64 folder's size will be around ~3GB.
To build mpv for a second time:
ninja update # perform git pull on all packages that used git
After that, build mpv as usual:
ninja mpv
Supported target architecture (TARGET_ARCH) with clang is: x86_64-w64-mingw32 , i686-w64-mingw32 , aarch64-w64-mingw32. The aarch64 are untested.
Example:
cmake -DTARGET_ARCH=x86_64-w64-mingw32 \
-DCMAKE_INSTALL_PREFIX="/home/user/clang_root" \
-DCOMPILER_TOOLCHAIN=clang \
-DGCC_ARCH=x86-64-v3 \
-DSINGLE_SOURCE_LOCATION="/home/user/packages" \
-DRUSTUP_LOCATION="/home/user/install_rustup" \
-DMINGW_INSTALL_PREFIX="/home/user/build_x86_64_v3/x86_64_v3-w64-mingw32" \
-G Ninja -B build_x86_64_v3 -S mpv-winbuild-cmake
The cmake command will create clang_root as clang sysroot where llvm tools installed. build_x86_64 is build directory to compiling packages.
cd build_x86_64
ninja llvm # build LLVM (take around ~2 hours)
ninja rustup # build rust toolchain
ninja llvm-clang # build clang on specified target
ninja mpv # build mpv and all its dependencies
If you want add another target (ex. i686-w64-mingw32), change TARGET_ARCH and build folder.
cmake -DTARGET_ARCH=i686-w64-mingw32 \
-DCMAKE_INSTALL_PREFIX="/home/user/clang_root" \
-DCOMPILER_TOOLCHAIN=clang \
-DSINGLE_SOURCE_LOCATION="/home/user/packages" \
-DRUSTUP_LOCATION="/home/user/install_rustup" \
-DMINGW_INSTALL_PREFIX="/home/user/build_i686/i686-w64-mingw32" \
-G Ninja -B build_i686 -S mpv-winbuild-cmake
cd build_i686
ninja llvm-clang # same as above
If you've changed GCC_ARCH option, you need to run:
ninja rebuild_cache
to update flags which will pass on gcc, g++ and etc.
| Commands | Description |
|---|---|
| ninja package | compile a package |
| ninja clean | remove all stamp files in all packages. |
| ninja download | Download all packages' sources at once without compiling. |
| ninja update | Update all git repos. When a package pulls new changes, all of its stamp files will be deleted and will be forced rebuild. If there is no change, it will not remove the stamp files and no rebuild occur. Use this instead of ninja clean if you don't want to rebuild everything in the next run. |
| ninja package-fullclean | Remove all stamp files of a package. |
| ninja package-liteclean | Remove build, clean stamp files only. This will skip re-configure in the next running ninja package (after the first compile). Updating repo or patching need to do manually. Ideally, all DEPENDS targets in package.cmake should be temporarily commented or deleted. Might be useful in some cases. |
| ninja package-removebuild | Remove 'build' directory of a package. |
| ninja package-removeprefix | Remove 'prefix' directory. |
| ninja package-force-update | Update a package. Only git repo will be updated. |
package is package's name found in packages folder.
-
Git/Hg
- ANGLE
- FFmpeg
- xz
- x264
- x265 (multilib)
- uchardet
- rubberband (with libsamplerate)
- opus
- openal-soft
- mpv
- luajit
- libvpx
- libwebp
- libpng
- libsoxr
- libzimg (with graphengine)
- libdvdread
- libdvdnav
- libdvdcss
- libudfread
- libbluray
- libunibreak
- libass
- libmysofa
- lcms2
- lame
- harfbuzz
- game-music-emu
- freetype2
- flac
- opus-tools
- mujs
- libarchive
- libjpeg
- shaderc (with spirv-headers, spirv-tools, glslang)
- vulkan-header
- vulkan
- spirv-cross
- fribidi
nettle- curl
- libxml2
- amf-headers
- avisynth-headers
- nvcodec-headers
- libvpl
- megasdk (with termcap, readline, cryptopp, sqlite, libuv, libsodium)
- aom
- dav1d
- libplacebo (with glad, fast_float, xxhash)
- fontconfig
- libbs2b
- libssh
- libsrt
- libjxl (with brotli, highway)
- libmodplug
- uavs3d
- davs2
- libsixel
- libdovi
- libva
- libzvbi
- rav1e
- libaribcaption
- zlib (zlib-ng)
- zstd
- expat
- openssl
- libsdl2
- speex
- vorbis
- ogg
- bzip2
-
Zip
- xvidcore (1.3.7)
- lzo (2.10)
- libopenmpt (0.7.6)
- libiconv (1.17)
gmp (6.3.0)- vapoursynth (R65/R63)
mbedtls (3.5.0)libressl (3.1.5)
Place the file on specified location to limit ram & cpu usage to avoid getting stuck while building mpv.
# /etc/wsl.conf
[interop]
#enabled=false
appendWindowsPath=false
[automount]
enabled = true
options = "metadata"
mountFsTab = false
[user]
default=<user>
---------------------------------------
# C:\Users\<UserName>\.wslconfig
[wsl2]
memory=4GB
swap=0
pageReporting=false
This project was originally created and maintained lachs0r. Since then, it heavily modified to suit my own need.