/light_controller

Light Controller for Raspberry PI (RGB)

Primary LanguagePythonMIT LicenseMIT

Light Controller for Raspberry Pi

This project is an RGB light controller designed to work with an RGB LED strip and a Raspberry Pi. You can customize and control the colors of the LED strip by adjusting the red, green, and blue values through the GPIO pins of the Raspberry Pi.

⚠ Important: Only with Raspberry PI support

👷‍♂️ Requirements

  • Raspberry Pi
  • RGB LED strip
  • Wiring connections
  • Python 3.x installed on the Raspberry Pi

⚙ Pin Configuration

  • Pin 40: Red
  • Pin 37: Green
  • Pin 38: Blue

Make sure to connect the LED strip correctly to the corresponding pins on the Raspberry Pi.

📦 Installation

  1. Clone this repository on your Raspberry Pi:
git clone http://github.com/zitrocode/light_controller
  1. Navigate to the project directory:
cd light_controller

🚀 Usage

  1. Run the main script:
python ./main.py

Note: Ensure you have Tkinter installed on your Raspberry Pi to run the graphical interface.

🤝 Contributions

Contributions are welcome! If you encounter any issues or have improvements, please create an issue or a pull request.

📝 License

This project is licensed under the MIT License