zscally/rush-osd-development

Issues

• osd freeze when motor arm

  #36 opened 9 years ago by GoogleCodeExporter
  0

• Cannot setup with multiwii pro

  #34 opened 9 years ago by GoogleCodeExporter
  2

• increase stability of GPS-speed

  #35 opened 9 years ago by GoogleCodeExporter
  0

• AVRDUDE Problem

  #33 opened 9 years ago by GoogleCodeExporter
  1

• unable to write settings to MinimOSD

  #30 opened 9 years ago by GoogleCodeExporter
  2

• fuzzy overlay

  #31 opened 9 years ago by GoogleCodeExporter
  0

• 'PWMrssiPin'was not declared in this scope - sketch upload stops

  #32 opened 9 years ago by GoogleCodeExporter
  0

• GUI does not work with updated Java (Version 1.8.*)

  #28 opened 9 years ago by GoogleCodeExporter
  5

• RSSI smoothing is very slow (KVOSD 2.3)

  #29 opened 9 years ago by GoogleCodeExporter
  1

• I don't know how to start the GUI-file in Linux.

  #27 opened 9 years ago by GoogleCodeExporter
  0

• Gui will not run on either of my computers!!

  #26 opened 9 years ago by GoogleCodeExporter
  1

• OSD crashes when scrolling through menu items on placement screen

  #24 opened 9 years ago by GoogleCodeExporter
  4

• Can't connect to OSD via bluetooth (+ SOLUTION)

  #25 opened 9 years ago by GoogleCodeExporter
  0

• gui prob. win7 64 bit

  #23 opened 9 years ago by GoogleCodeExporter
  2

• White streaks with Fatshark video system

  #22 opened 9 years ago by GoogleCodeExporter
  3

• Compile Error

  #21 opened 9 years ago by GoogleCodeExporter
  21

• Armed Status appears over top of the Compass/Heading bar at the top.

  #19 opened 9 years ago by GoogleCodeExporter
  0

• #define SPEED line (for serial port baudrate) in config.h is ineffective

  #20 opened 9 years ago by GoogleCodeExporter
  0

• Amperage display is 0.0A if taking data from Multiwii and onboard adc is off. The mAh counter is working fine.

  #17 opened 9 years ago by GoogleCodeExporter
  1

• Problem in multi wii2.1

  #18 opened 9 years ago by GoogleCodeExporter
  1

• features absent in latest version

  #16 opened 9 years ago by GoogleCodeExporter
  2

• OSD GUI variables swapped. Video Voltage

  #14 opened 9 years ago by GoogleCodeExporter
  2

• Arduino Code for Ardupilot needed.

  #15 opened 9 years ago by GoogleCodeExporter
  1

• Splash Screen and Display Characters

  #13 opened 9 years ago by GoogleCodeExporter
  1

• PWM RSSI doesn't work with frsky

  #11 opened 9 years ago by GoogleCodeExporter
  5

• Amperag via ADC is missing critical parameter

  #12 opened 9 years ago by GoogleCodeExporter
  2

• Can't hide Rssi from Osd

  #10 opened 9 years ago by GoogleCodeExporter
  7

• r370 FormatGPSCoord Usage causing loop/crash

  #9 opened 9 years ago by GoogleCodeExporter
  1

• Backport two bugfixes (MSP RSSI & baseflight fix)

  #8 opened 9 years ago by GoogleCodeExporter
  3

• OSD firmware and GUI (built from sources) - Settings are not in synch

  #7 opened 9 years ago by GoogleCodeExporter
  2

• can you make a page in the wiki for user screen layouts ?

  #6 opened 9 years ago by GoogleCodeExporter
  4

• Voltage Hardware mod

  #4 opened 9 years ago by GoogleCodeExporter
  3

• Current consuption from multiwii to minim osd

  #5 opened 9 years ago by GoogleCodeExporter
  2

• No connection on MWC version r1360

  #3 opened 9 years ago by GoogleCodeExporter
  2

• Altitude issue

  #2 opened 9 years ago by GoogleCodeExporter
  2

• [deleted issue]

  #1 opened 9 years ago by GoogleCodeExporter
  0