Link To The Past Backup

Simple backup program.

The backup is always a simple copy of the files. This ensures that the backup can be used in any point in the future. Even if the backup program is lost or incompatible.

Key Features

Works incrementally while providing full backups at any time. Uses hard links to reference files from the previous backup, so each backup looks like a full backup, while saving space on all the files that have not changed.
Changed files are copied entirely.
Check before doing. Available space and capability to create the required number of files (inodes) is checked before the copying starts.
Does not rely on external tools (cp, rsync etc.).

More Features

Checksums may be calculated on backed up files. This allows to verify the backup (bad disk, modifications). It can also be used to check the original files against a previous backup.
Files are checked by modification date and size.
Does not erase failed backup. It's your decision to delete these. They can easilily be identified by the name of the directory (directories ending with ..._incomplete).
File systems are not crossed. Use include directive in configuration file to manually include the path or an exclude directive to suppress the warning.

Caveats

Special files (devices) are not backed up. This means this backup solution is not suitable to secure the entire system. It's meant for user data.
Files are checked by modification date and size. This is very fast to determine if a file has been changed. However, there are programs that reset the modification time even after modifications. Such files will not be detected!
The target location needs to be in the file system. This tool does not support backing up via protocols like ssh, ftp etc. Typically the target will be a USB disk or memory stick but it also works well with storage in the network, e.g. a NAS mounted via NFS.
Hard linked files only exist once on the disk. This is also a risk that when it is damaged (disk errors, manipulations), then the references in all backups are also damaged. To safeguard against this risk, it is advised to create full copies from time to time and/or use different disks to backup.
Backups are timestamped, you can not create more than one backup per second :-)
Time stamps are stored in microsecond resolution (some file systems allow higher accuracy, if this is need by the application, do not use this backup tool). Change detection works at a resolution of 10µs.
Currently does not restore permissions on soft-links. This is not so critical as under normal use the permissions of a link are not used anyway (only the permissions of the target).

Warning

Filenames with encoding errors are skipped! (A warning is printed)

Yes it is not the first program of that kind. The reason it exists is that existing programs did, for me, not work well with some files or amount of data. There is no need to use rsync to make local copies. Analyzing the files often takes more time than simply copying it.

File access is minimized as much as possible. Files in the backup are usually accessed one time (copy or link then set permissions, make read-only). Directories are accessed twice (create and in the end, make read-only). Checksums are calculated on the fly as files are copied, data is read/written exactly once.

Command Line Tool

General options:

`-v`	make outputs more verbose, can be given multiple times
`-q`	switch off messages
`--debug`	for the programmer: shows tracebacks for failures
`-c CONFIGURATION`
	load given configuration file
`-p PROFILENAME`	load given profile. profiles are configuration files in `~/.link_to_the_past`.

Create Backups

python -m link_to_the_past.create -c CONFIGURATION

options:

`--full`	copy all items, do not depend on last backup.
`-f, --force`	create backup anyway, even if no files have changed

Restore Files

python -m link_to_the_past.restore -c CONFIGURATION ACTION [...]

Options:

-t TIMESPEC

specify a backup, default (option not given, is to use the latest backup)

Actions:

list list all backups ls [PATTERN] list files of backup, optionally filtered by PATTERN cp SRC DST copy a single file from the backup (SRC) to DST cp -r SRC DST copy a directory recursively from the backup (SRC) to DST cat SRC dump single file from the backup (SRC) to stdout path print the absolute path to the backup

Compare Backups

These actions are used to compare two backups or a backup to the current files.

python -m link_to_the_past.compare -c CONFIGURATION ACTION [...]

Options:

-t TIMESPEC

specify a backup, default (option not given, is to use the latest backup)

Actions:

verify compare files in the source location against the: backup (also compare hashes)
integrity check all files within the backup for changes (compare: hashes)
changes TIMESPEC compare two backups and list differences: added/changed/removed

Change Backups

These operations alter previously made backups. To be used with care! There are actions to remove files and/or directories from backups or remove entire backups.

python -m link_to_the_past.edit -c CONFIGURATION ACTION [...]

Options:

-t TIMESPEC

specify a backup, default (option not given, is to use the latest backup)

Actions:

rm SRC remove a file from the backup rm -r SRC remove a directory and all its contents purge removes the complete backup

Copy

The cp action copies files or directories from the backup to the given destination. This is a convenient way to restore files in to a new location.

If the destination is a directory, the name of the source is used as name for the file or directory that is being restored within given destination.

cp restores the original permissions of the file.

Warning

Existing a file or directory with the same name will be overwritten!

Remove

The rm action deletes files from the backup. Its purpose is to remove items that have been accidentally backed up (e.g. temporary files, caches, sensitive content etc.).

Warning

This destroys the files in the backup, use with extreme care!

Note

It usually makes sense to add an exclude rule to the control file so that it is not included again in the next backup.

Purge

This command completely deletes a backup. The backup that is affected is selected with the -t option. There will be no way to get the files back!

Warning

This destroys the complete backup, use with extreme care!

timespec - time specifications

The -t option accepts the following expressions:

last the most recent backup, same as omitting -t
previous one second most recent backup
first the first and oldest one
expressions ending in ago, e.g.: 1 hour ago, 1 day ago supported units are hour, day, week, month, year as well as each of them in plural form with a s appended. The amount must be a positive integer number (> 0).
yesterday is the same as 1 day ago
dates such as 2012-04-01
dates and times such as 2012-04-01_1655
partial dates also work, 2012 or 2012-04 because the time specification is simply matched against the name of the backup on the disk and this name is simply the date/time strings as seen above. In case of multiple matches the most recent one is picked.

The changes action requires a TIMESPEC2 argument which can also have the value now to represent the current files instead of a backup.

Profiles

A profile is the same as a configuration file but located in a special place. The idea is to make it easier to work with multiple configurations.

Without any -p or -c options, a default configuration is loaded.

Named profiles are loaded with the -p <name> option. A file <name>.profile is searched in the users ~/.config/link-to-the-past directory.

Configuration file format

# starts a comment, the rest of line is ignored
whitespace separated (spaces in filenames must be escaped as "")
the order of the commands is irrelevant
xxx line oriented
xxx continues a [virtual] line.

Backup control files

include <path>

adds the path to the backup

exclude <shell-pattern>

excludes files and directories matching the pattern

load_config <path>

Load an other configuration file. This may be useful if a common include/exclude list is (re-)used in different configuration files.

hash <name>

Specify the hash function to use. No hashing will be performed if the directive is absent.

Available hash functions: - CRC32 (non-cryptographic) - SHA-256 - SHA-512 - MD5 (collisions known)

Note that the cryptographic value is very limited as long as the file list is stored alongside the backup. To secure against intentional changes, the file list has to be stored at a different, safe location or has to be protected by other means (e.g. PGP/gpg).

CRC32 yields the shortest hash string which means the file list stays smaller compared to the other algorithms, it is not cryptographic though.

xxx? ignore-mode, ignore-ids, always-copy <shell-pattern>

File Lists

hash <name>

Specify the hash function to use. See also hash directive of the control file format above.

p1 <mode> <uid> <gid> <size> <atime> <mtime> <flags> <hash> <path>

<flags> may be - if not supported
directory or file etc. is determined by <mode>
all fields except <hash> and <path> are decimal numbers, access and modification times are floats the others integers.
<path> must not contain spaces. escapes are allowed, including "\ ".
<hash> is a string of printable characters, e.g. 123ABC4D. See also hash directive above.

TODO and ideas

commands - list one file in all backups - grep contents of [one] file[s] in all backups - locate -> search for matching filenames - autoclean -> remove incomplete backups
change detection via hash sums or other means? there may be applications that change files, keeping the size and faking the mtime.
config file - force-copy PATTERN - enable-checksum PATTERN
idea for exclude pattern: "nobackup" in filename
rangliste der grössten files bei backup, frage bevor start
expand list command: include date like, "this week", "monday, two weeks ago", "yesterday", "today", "last month", "last year" etc.

Indexer - excludes - includes

CreateBackup - source_root - backup_root

RestoreBackup - backup_root

CompareBackup - root1 - root2

zsquareplusc/lttp-backup