NOTE: FROM VERSION 0.0.2
THE ROUTER NEEDS INTERNET ACCESS. If you require to run the exploit without internet access please try version 0.0.1
. Find the versions here: https://github.com/acecilia/OpenWRTInvasion/releases
pip3 install -r requirements.txt # Install requirements
python3 remote_command_execution_vulnerability.py # Run the script
After that, a letnet server will be up and running on the router. You can connect to it by running:
telnet <router_ip_address>
- User: root
- Password: none (just hit enter)
The script also starts an ftp server at port 21, so you can get access to the filesystem using a GUI (for example cyberduck).
When installing OpenWrt on the Xiaomi 4A Gigabit, you may use:
-
An OpenWrt sapshot image that is known to work with the router (downloaded from the official OpenWrt releases portal on the 2020/04/15 and hosted in this repository). The image flashes and boots correctly, but there are some known and major connectivity problems mentioned here:
- Link: https://raw.githubusercontent.com/acecilia/OpenWRTInvasion/master/firmwares/OpenWrt/openwrt-ramips-mt7621-xiaomi_mir3g-v2-squashfs-sysupgrade.bin
- sha:
245dfe344b9be74121574d37fd5096da2beb9a52dfd4e7903e8f2313414ffc03
-
The latest snapshot from OpenWrt. At the moment, there are important changes being implemented on OpenWrt, and this image may or may not work, and could brick your device: https://downloads.openwrt.org/snapshots/targets/ramips/mt7621/openwrt-ramips-mt7621-xiaomi_mir3g-v2-squashfs-sysupgrade.bin
-
Other images provided by OpenWrt users (at your own risk): OpenWrt forum. For example:
-
Wait until there is a stable release of OpenWrt
If after reading above text you still want to proceed, after login to the router through telnet run the following commands:
cd /tmp
curl https://raw.githubusercontent.com/acecilia/OpenWRTInvasion/master/firmwares/OpenWrt/openwrt-ramips-mt7621-xiaomi_mir3g-v2-squashfs-sysupgrade.bin --output firmware.bin # Put here the URL you want to use to download the firmware
./busybox sha256sum firmware.bin # Verify the firmware checksum before flashing, very important to avoid bricking your device!
mtd -e OS1 -r write firmware.bin OS1 # Install OpenWrt
This will install the snapshot version of OpenWrt (without Luci). You can now use ssh to connect to the router (and install Luci if you prefer it).
Some users have reported worse WIFI performance in OpenWrt than in the stock firmware. See the following links:
- MiRouter 4A Gigabit: user ksc91u claims that this method also works on firmware version
2.28.62
: OpenWrt forum. - MiRouter 4A 100M (non gigabit): user morhimi claims that this method works on firmware version
2.18.51
: OpenWrt forum. User Jeffpeng claims that this method works on firmware version2.18.58
: OpenWrt forum. - MiRouter 4C: user Jeffpeng claims that this method works on firmware version
2.14.81
: OpenWrt forum. - Mi Router 3Gv2: user Massimiliano Mangoni claims that this method also works on firmware version
2.28.8
(message posted in Slack). - Mi Router 4Q (aka R4C): user cadaverous claims that this method also works on firmware version
2.28.48
(message posted in Slack), but because the router is mips architecture (not mipsel), he needed to use version0.0.1
of the script (the other versions use a busybox binary built for the mipsel architecture that is used to start a telnet sever).
You can find solutions in the following links:
- User albertcp posted a very detailed guide: OpenWrt forum
- User micky0867 has some more comments about the topic: OpenWrt forum
- Original vulnerabilities and exploit: UltramanGaia
- Instructions to install OpenWrt after exploit execution: rogerpueyo
- Testing and detailed install instructions: hey07