This Pi-gen created image is configured to set up a wifi access point, SSH and a web terminal.
The default account is username: dt password: proxmark3
Connect to the PM3 wifi hot spot with the passphrase DangerousThings
Once logged in you will need to compile the PM3 software at the moment.
cd proxmark3 && make clean && make
sudo make install
To remake the image you will need the pi-gen repository.
git clone https://github.com/RPI-Distro/pi-gen
If you are building for ARM64 then make sure you checkout the ARM64 branch
git checkout arm64
Then you will need to copy the contents of the pi-gen subdirectory from this repository into place.
cp -rp ./pi-gen/* <your path>/pi-gen/
Finally you can create the image following the instructions in the pi-gen repository. This will create an output image in <your path>/pi-gen/work/Proxmark3/export-image You will be looking for the one ending in -pm3.img