Welcome to the Flipper Zero Unleashed Firmware repo!

This firmware is a fork from flipperdevices/flipperzero-firmware

Our goal is to make all features possible on this device without any limitations!

This software is for experimental purposes only and is not meant for any illegal activity/purposes.
We do not condone illegal activity and strongly encourage keeping transmissions to legal/valid uses allowed by law.
Also, this software is made without any support from Flipper Devices and is in no way related to the official devs.

Our Discord Community:

Dev builds (unstable)

Releases in Telegram

https://t.me/unleashed_fw

What's changed

Sub-GHz regional TX restrictions removed
Sub-GHz frequency range can be extended in settings file (Warning: It can damage Flipper's hardware)
Many rolling code protocols now have the ability to save & send captured signals
FAAC SLH (Spa) & BFT Mitto (keeloq secure with seed) manual creation
Sub-GHz static code brute-force plugin
LFRFID Fuzzer plugin
Custom community plugins and games added + all known working apps can be downloaded in extra pack in every release
Extra Sub-GHz frequencies + extra Mifare Classic keys
Picopass/iClass plugin included in releases
Recompiled IR TV Universal Remote for ALL buttons
Universal remote for Projectors, Fans, A/Cs and Audio(soundbars, etc.)
Customizable Flipper name

BadUSB -> Keyboard layouts (by rien > dummy-decoy)
Sub-GHz -> External CC1101 module support - (by quen0n)
Sub-GHz -> Add manually menu extended with new protocols
Sub-GHz -> New frequency analyzer - (by ClusterM)
Sub-GHz -> Save last used frequency (by derskythe)
Sub-GHz -> Press OK in frequency analyzer to use detected frequency in Read modes (by derskythe)
Sub-GHz -> Long press OK button in Sub-GHz Frequency analyzer to switch to Read menu (by derskythe)
Lock device with pin(or regular lock if pin not set) by holding UP button on main screen (by an4tur0r)

Sub-GHz -> Short press OK in frequency analyzer to save detected frequency for usage in Read modes
Sub-GHz -> Long press OK button in Sub-GHz Frequency analyzer to switch to Read menu and automatically use selected frequency
Sub-GHz -> External CC1101 module support (Hardware SPI used)
SubGHz -> Hold right in received signal list to delete selected signal
SubGHz -> Custom buttons for Keeloq / Alutech AT4N / Nice Flor S / Somfy Telis / Security+ 2.0 - now you can use arrow buttons to send signal with different button code
SubGHz -> BFT Mitto / Somfy Telis / Nice Flor S manual creation with programming new remote into receiver (use button 0xF for BFT Mitto, 0x8 (Prog) on Somfy Telis)
SubGHz -> Debug mode counter increase settings (+1 -> +5, +10, default: +1)
SubGHz -> Debug PIN output settings for protocol development
Infrared -> Debug TX PIN output settings
Other small fixes and changes throughout
See other changes in readme below

Also check the changelog in releases for latest updates!

Current modified and new Sub-GHz protocols list:

Thanks to Official team (to their SubGHz Developer, Skorp) for implementing decoders for these protocols.

Encoders/sending made by Eng1n33r & @xMasterX:

Keeloq [Not ALL systems supported for decode or emulation yet!] - Supported manufacturers list
Keeloq: HCS101
Keeloq: AN-Motors
Keeloq: JCM Tech
Keeloq: MHouse
Keeloq: Nice Smilo
Keeloq: DTM Neo
Keeloq: FAAC RC,XT
Keeloq: Mutancode
Keeloq: Normstahl
Keeloq: Beninca
Keeloq: Stilmatic / Schellenberg
Keeloq: CAME Space
Keeloq: Aprimatic (model TR and similar)
CAME Atomo
Nice Flor S
FAAC SLH (Spa) [External seed calculation required (For info contact me in Discord: Nano#8998)]
Keeloq: BFT Mitto [External seed calculation required (For info contact me in Discord: Nano#8998)] -> Update! check out new instructions
Security+ v1 & v2
Star Line

Encoders made by @assasinfil & @xMasterX:

Somfy Telis
Somfy Keytis
KingGates Stylo 4k
Alutech AT-4N
Nice ON2E (Nice One)

Please support development of the project

The majority of this project is developed and maintained by me, @xMasterX. I'm unemployed because of the war, and the only income I receive is from your donations. Our team is small and the guys are working on this project as much as they can solely based on the enthusiasm they have for this project and the community.

@assasinfil - SubGHz
@Svaarich - UI design and animations
@Amec0e - Infrared assets
Community moderators in Telegram, Discord, and Reddit
And of course our GitHub community. Your PRs are a very important part of this firmware and open-source development.

The amount of work done on this project is huge and we need your support, no matter how large or small. Even if you just say, "Thank you Unleashed firmware developers!" somewhere. Doing so will help us continue our work and will help drive us to make the firmware better every time. Also, regarding our releases, every build has and always will be free and open-source. There will be no paywall releases or closed-source apps within the firmware. As long as I am working on this project it will never happen. You can support us by using links or addresses below:

Boosty (patreon alternative): https://boosty.to/mmxdev
Ko-Fi: https://ko-fi.com/masterx
cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Community apps included:

RFID Fuzzer (by Ganapati & @xMasterX) & New protocols by @mvanzanten
Sub-GHz bruteforcer (by @derskythe & xMasterX) (original by Ganapati & xMasterX)
Sub-GHz playlist (by darmiel)
ESP8266 Deauther plugin (by SequoiaSan)
WiFi Scanner plugin (by SequoiaSan)
MultiConverter plugin (by theisolinearchip)
WAV Player (OFW: DrZlo13) - Fixed and improved by LTVA1 -> Also outputs audio on PA6 - 3(A6) pin
Barcode generator plugin (original by McAzzaMan) - EAN-8 and refactoring by @msvsergey
GPIO: Sentry Safe plugin (by H4ckd4ddy)
ESP32: WiFi Marauder companion plugin (by 0xchocolate) - Saving .pcap on flipper microSD by tcpassos -> Only with custom marauder build (It is necessary to uncomment "#define WRITE_PACKETS_SERIAL" in configs.h (in marauder fw) and compile the firmware for the wifi board.) Or download precompiled build -> Download esp32_marauder_ver_flipper_sd_serial.bin
NRF24: Sniffer & MouseJacker (with changes) (by mothball187)
Simple Clock (timer by GMMan) (original by CompaqDisc)
Sub-GHz Remote (UniversalRF Remix) (by @darmiel & @xMasterX) (original by @ESurge)
Spectrum Analyzer (with changes) (by jolcese) - Ultra Narrow mode & scan channels non-consecutively
Metronome (by panki27)
DTMF Dolphin (by litui)
TOTP (Authenticator) (by akopachov)
GPS (by ezod) works with module NMEA 0183 via UART (13TX, 14RX, GND pins on Flipper)
i2c Tools (by NaejEL) - C0 -> SCL / C1 -> SDA / GND -> GND | 3v3 logic levels only!
HC-SR04 Distance sensor - Ported and modified by @xMasterX (original by Sanqui) - How to connect -> (5V -> VCC) / (GND -> GND) / (13|TX -> Trig) / (14|RX -> Echo)
Morse Code (by wh00hw)
Unitemp - Temperature sensors reader (DHT11/22, DS18B20, BMP280, HTU21x and more) (by quen0n)
BH1750 - Lightmeter (by oleksiikutuzov)
iButton Fuzzer (by xMasterX)
HEX Viewer (by QtRoS)
POCSAG Pager (by xMasterX & Shmuma)
Text Viewer (by kowalski7cc & kyhwana)
UART Terminal (by cool4uma)
ProtoView (by antirez)
SWD Probe (by g3gg0)

Games:

DOOM (fixed) (by p4nic4ttack)
Zombiez (Reworked By DevMilanIan) (Original By Dooskington)
Flappy Bird (by DroomOne)
Arkanoid (refactored by xMasterX) (by gotnull)
Tic Tac Toe (refactored by xMasterX) (by gotnull)
Tetris (with fixes) (by jeffplang)
Minesweeper (by panki27)
Heap Defence (aka Stack Attack) - Ported to latest firmware by @xMasterX - (original by wquinoa & Vedmein)
Game15 (by x27)
Solitaire (by teeebor)
BlackJack (by teeebor)
2048 game (by eugene-kirzhanov)

Where I can find IR, Sub-GHz, ... files, DBs, and other stuff?

UberGuidoZ Playground - Large collection of files - Github

Awesome Flipper Zero - Github

Project structure

applications - Applications and services used in firmware
assets - Assets used by applications and services
furi - Furi Core: OS-level primitives and helpers
debug - Debug tool: GDB-plugins, SVD-file and etc
documentation - Documentation generation system configs and input files
firmware - Firmware source code
lib - Our and 3rd party libraries, drivers and etc...
site_scons - Build helpers
scripts - Supplementary scripts and python libraries home

Also, pay attention to the ReadMe.md files inside those directories.

1337in/unleashed-firmware

Welcome to the Flipper Zero Unleashed Firmware repo!

Dev builds (unstable)

Releases in Telegram

What's changed

Current modified and new Sub-GHz protocols list:

Please support development of the project

Community apps included:

Instructions

Sub-GHz

Plugins

Plugins that works with external hardware

Where I can find IR, Sub-GHz, ... files, DBs, and other stuff?

Links

Project structure