5axes/CustomSupportCylinder

Issues

• UM Cura report: Unable to download from the Marketplace (Custom Support Cylinders)

  #21 opened a month ago by GregValiant
  0

• Cura 5.7.0 Update?

  #38 opened 3 months ago by priggs410
  3

• Saving causes the supports to move

  #37 opened 3 months ago by TimyIsCool
  3

• Possible to have clearance from model?

  #35 opened a year ago by agibson2
  1

• Most support types are going through model interfering with the print/infill

  #19 opened 7 months ago by jaydawgx7
  4

• Support generated inside model

  #36 opened a year ago by rdxj
  0

• Can't install plugin

  #34 opened a year ago by shiftylilbastrd
  2

• Adding a wider base for narrow support cylinders?

  #33 opened a year ago by sityware
  2

• [Feature Request]

  #31 opened a year ago by EklDuderino
  2

• Custom support moves model up in Z axis

  #27 opened 2 years ago by jabbermacy
  3

• Object duplication

  #22 opened 2 years ago by Adriex
  2

• Cylindric Custom Supports

  #26 opened 2 years ago by Psyc0Flyer
  1

• Supports down to workspace, this is problem. + some bugs.

  #25 opened 2 years ago by PetroRudyi
  0

• Question/Issue with the bridge supports!?!?!?!

  #15 opened 2 years ago by Cordero808
  2

• [Enhancement] Button Remove All

  #17 opened 2 years ago by 5axes
  2

• Not slicing anymore on CURA 4.10

  #8 opened 3 years ago by Lakemast
  3

• Issue with cura and CustomSupportCylinder

  #7 opened 3 years ago by psdavidson812
  14

• Supports only generating one layer

  #3 opened 4 years ago by Garywoo
  4

• Resizing the custom support moves the object it is attached to

  #2 opened 4 years ago by konskarm
  2