Pinned Repositories
Dimmer32u4
Library for easy use of PWM-outputs on ATmega32U4 based Arduinos (e.g. Leonardo, Micro...)
Dimmer_4CH_UFI
Dimmer sketch for Universal Flush Interface or other 32u4 based boards
DimmerControl
Dimmer control functions, like soft on/off, dimming up/down etc
DimmerZero
Library for dimmer application with SAMD21G18A (e.g. Arduino Zero/M0).
ESP32-ScanMyTesla
CAN to BlueTooth Adapter for ScanMyTesla on ESP32
esphome-yaml-collection
Collection of ESPHome YAMLs
GridSensor
Firmware for GridSensor
KNX_sniffer
KNX sniffer aka KNX BUS Monitor
mitpylon
Man In The Middle Adapter For Pylontech Communction Protocol
TeslaLogger
TeslaLogger is a self hosted data logger for your Tesla Model S/3/X/Y. Actually it supports RaspberryPi 3B, 3B+, 4B, Docker and Synology NAS.
Adminius's Repositories
Adminius/ESP32-ScanMyTesla
CAN to BlueTooth Adapter for ScanMyTesla on ESP32
Adminius/KNX_sniffer
KNX sniffer aka KNX BUS Monitor
Adminius/mitpylon
Man In The Middle Adapter For Pylontech Communction Protocol
Adminius/Dimmer_4CH_UFI
Dimmer sketch for Universal Flush Interface or other 32u4 based boards
Adminius/esphome-yaml-collection
Collection of ESPHome YAMLs
Adminius/evcc
Sonne tanken ☀️🚘
Adminius/PlugEVSE
On AnalogEVSE based EVSE, that fits in a Type 2 EV plug
Adminius/arduino-esp32
Arduino core for the ESP32
Adminius/TeslaLogger
TeslaLogger is a self hosted data logger for your Tesla Model S/3/X/Y. Actually it supports RaspberryPi 3B, 3B+, 4B, Docker and Synology NAS.
Adminius/ArduinoLibraryForCANSignalAnalysis
General Arduino Library to extract CAN signals from messages
Adminius/Battery-Emulator
This software enables EV battery packs to be used for stationary storage in combination with solar inverters.
Adminius/BetterTeslaChargeportOpener
Improved code for Arduino that creates the 433MHz ASK signal to open the Tesla Charge Port.
Adminius/bms-to-inverter
Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an inverter using any protocol (e.g. UART, RS485, ModBus or CAN)
Adminius/bsc_fw
Firmware battery safety controller (BSC)
Adminius/bsc_hw
Hardware battery safety controller (BSC)
Adminius/CANserver
Firmware and Documentation for the CANserver
Adminius/docs
evcc documentation
Adminius/EastronSDMreplicator
Eastron SDM630 Modbus replicator
Adminius/esp32FOTA
Experiments in firmware OTA updates for ESP32 dev boards
Adminius/esphome
ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.
Adminius/esphome-jkpb-bms
ESPHome components to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE. Monitor multiple JK-PBx (hw v14 & v15) using RS485 internal network.
Adminius/esphome-tesla-ble
Interact with Tesla vehicles over BLE using ESPHome and Home Assistant
Adminius/ESPITM
ESP In The Middle: Multi CAN+RS485 PCB
Adminius/model3dbc
DBC file for Tesla Model 3 CAN messages
Adminius/OpenDTU
Software for ESP32 to talk to Hoymiles/TSUN/Solenso Inverters
Adminius/OpenWeather
Arduino library to fetch weather forecasts from OpenWeatherMap
Adminius/RejsaCAN-ESP32
ESP32 and ESP32-S3 board with CAN interface, runs on 12V power (with auto shutdown)
Adminius/SDM_Energy_Meter
reading SDM72 SDM120 SDM220 SDM230 SDM630 modbus energy meters from arduino (esp8266, esp32, avr)
Adminius/TestGo
Adminius/testsub