AlexxIT/XiaomiGateway3
Home Assistant custom component for control Xiaomi Multimode Gateway (aka Gateway 3), Xiaomi Multimode Gateway 2, Aqara Hub E1 on default firmwares over LAN
PythonMIT
Pinned issues
Issues
- 4
Bluetooth mesh light, which will turn on by itself.
#1362 opened by hzonz - 12
- 5
添加支持ddy.switch.sw4a02
#1356 opened by invoker-karl - 1
Each button of device “xiaomi.switch.pro3” is reported as “button_1_single”.
#1365 opened by TioaChan - 1
- 1
increase transmit power
#1370 opened by chlorophyceae - 5
- 3
ezsp to ember migration
#1363 opened by ALERTua - 0
The Xiaomi Human Body Sensor 2S is not working with the new version of HomeAssistant.
#1364 opened by xysgx - 0
My bad. Not this addons error
#1361 opened by shummo - 9
PTX BLE Wireless Switch cannot be used normally
#1309 opened by ARC-MX - 3
The Xiaomi Human Body Sensor 2S is not working with the new version of HomeAssistant.
#1346 opened by xysgx - 0
Support loock.lock.t2pv1
#1359 opened by zhang-wenchao - 3
- 0
xiaomi_gateway3.send_command on version 4.x
#1354 opened by azuwis - 4
Support yunmi.kettle.v12
#1350 opened by FilipeOS - 0
Hello! Please fix the following problems. Thank you
#1349 opened by HASSAAS - 4
- 2
【咨询】请问Converters中的mi= 后面的内容是从哪里获取
#1353 opened by LeiDuang - 4
Lights opened itself constantly
#1345 opened by wz69699 - 2
add support linp.curtain.c2,linp.wopener.wd2lb and update Linptech Switch QT1
#1348 opened by meineihan - 2
- 1
Integrate Mijia smart button with temperature sensor?
#1344 opened by jockebq - 14
- 5
No battery voltage for lumi.weather (WSDCGQ11LM)
#1338 opened by mpiexec - 1
- 10
Bluetooth mesh does not get the status correctly
#1335 opened by hzonz - 2
linp.flood.rs1bb reports Unknown
#1337 opened by ov1d1u - 7
Can mesh switch show more attributes ?
#1330 opened by mickey50 - 1
Mi Smart Kettle Pro
#1339 opened by mdarek2 - 2
Old Firmware - New message
#1340 opened by guardianbs - 0
Request support for loock.lock.t2v1
#1341 opened by hzonz - 6
Fix illuminance for Aqara Motion Sensor E1 after v4
#1322 opened by LiuYaKu - 4
- 11
There is no change for my door lock device(loock S50m) when opening and closing the door
#1324 opened by Kyle0820 - 2
Unable to set occupancy_timeout for Aqara Motion Sensor in configuration.yaml
#1334 opened by donald-ong - 6
Most of Switch lost Controller
#1333 opened by three1bro - 0
Please update zigbee_table.yaml
#1331 opened by DJTerentjev - 6
Pleasse add more feature to ainice.sensor_occupy.rd
#1310 opened by three1bro - 0
Xiaomi Multimode Gateway - compiled MultiPAN RCP firmware (EZSP Firmware: 7.3.1.0 build 0)
#1328 opened by zalatnaicsongor - 7
Errors in logs 'msg': 'dispatch_event: mqtt_publish...' after updating from v3.3.6 to v4.0.x
#1325 opened by xkansler - 3
Can I add an occupancy_timeout parameter to a BLE motion sensor using the BLE number(model)?
#1329 opened by flyibeat - 1
SSID change via telnet?
#1327 opened by dansh1n - 11
Lost control for some options and some empty values in statististic table - after upgrade to V4.0.0.
#1314 opened by bobofruit1970 - 1
Add support lemesh.remote.ts4
#1318 opened by Marsmz - 3
Converters are no longer working since 4.0.0 and above
#1321 opened by hubpf - 5
Multi-key switch only shows one switch
#1320 opened by hyoukaija - 4
- 3
Fix support automations for some buttons with miot spec
#1315 opened by LiuYaKu - 5
Restore convertors for BLE toothbrush MES601
#1313 opened by ptbsare