STM32Loader
===========
Python script which will talk to the STM32 bootloader to upload and download firmware.
Original Version by: Ivan A-R <ivan@tuxotronic.org>
Usage: ./stm32loader.py [-hqVewvr] [-l length] [-p port] [-b baud] [-a addr] [file.bin]
-h This help
-q Quiet
-V Verbose
-e Erase
-w Write
-v Verify
-r Read
-l length Length of read
-p port Serial port (default: /dev/tty.usbserial-ftCYPMYJ)
-b baud Baud speed (default: 115200)
-a addr Target address
./stm32loader.py -e -w -v example/main.bin
Example:
stm32loader.py -e -w -v somefile.bin
This will pre-erase flash, write somefile.bin to the flash on the device, and then perform a verification after writing is finished.