Issues
- 0
PrusaSlicer, transfer of Chamber temp
#136 opened by huskyte - 0
- 0
- 0
- 3
TEST_SPEED macro not compatible with latest klipper
#119 opened by Arakon - 1
Tachometer Fan Guide for Canbus users need diode
#97 opened by waxall - 1
broken link in Extrusion Patterns.
#126 opened by mooklepticon - 0
Velocity and Acceleration Test for Z
#127 opened by Leafy1 - 3
- 1
test_speed macro x axis skipping
#122 opened by krautech - 3
Question about SuperSlicer version
#117 opened by Terixxx - 0
There is an Error in the calculation of the new_rotation_distance in the Tuning Chapter Extruder Calibration
#121 opened by iTzMtrx - 4
Ellis' Print Tuning Guide compatibility?
#114 opened by cwadej - 9
TEST_SPEED Macro Move out of range
#82 opened by seanmccully - 0
PA problem, or maybe something else
#116 opened by bmharon - 0
Feedback: Pockmark "Fix"
#115 opened by TheFuzzyGiggler - 0
Cura Pressure Advance plugin is no longer supported
#113 opened by Tam-Lin - 0
- 0
Another Slicer Request
#110 opened by fatofthelan - 1
Improve guide clarity: Tuning > extruder calibration. List ideal outcome.
#109 opened by IvanGutowskiSmith - 0
[Request] Skew Correction
#108 opened by FatalBulletHit - 1
Pressure advance rounded corners
#107 opened by EkiciLP - 0
Tuning flow rate to adjust first layer squish
#106 opened by blastrock - 1
- 1
Pause/Resume
#104 opened by skyaee - 0
SMALLPATTERNSIZE not a param
#101 opened by KRTac - 0
- 1
Pause macro with BTT Smart Filament Sensor V2
#99 opened by drpeej - 0
Abnormal grooves on the top layer
#98 opened by changxxxxx - 1
Extrusion Multiplier Page is outdated?
#91 opened by Strudel66 - 4
EM Calibration with PrusaSlicer
#74 opened by jleutgeb1 - 2
Suggestion for Tutorial Page
#93 opened by PuterPro - 0
- 0
Questions about first layer temperatures w/r/t LA?
#95 opened by Lyude - 0
issue with Extrusion Multiplier test
#94 opened by iceman2511 - 1
Add note about "step_pulse_duration" directive required for Mellow boards to layer shifting article
#73 opened by eltoozero - 0
Relative Reference Index deprecated
#92 opened by agreen - 1
Pausing before print start
#90 opened by Dfwsb2 - 0
Cura First Layer Line Width
#89 opened by Senorgif2 - 0
Issue with volumetric flow rate instructions
#88 opened by garyd9 - 1
- 0
Add OrcaSlicer Please
#86 opened by scottharry81 - 2
- 0
License?
#83 opened by natescherer - 0
Dead end SuperSlicer - plans for afterwards?
#81 opened by hpoperator - 1
- 2
Link leads to 404
#72 opened by 3lementalS - 1
Broken link under cooling and layer times
#76 opened by metzgarj - 4
Extrusion Multiplier > Steps > PrusaSlicer - information provided is incorrect, there IS a way, and it's easier than your SS instructions
#75 opened by hiltonjanfield - 1
Broken link under section [Tuning Pressure Advance / Linear Advance Lines Method (DEPRECATED)]
#78 opened by Nandox7