Issues
- 1
- 5
Picofly OLED install short short long error
#49 opened by Samybigio - 1
==*(long long short) error
#50 opened by IweRazed119 - 0
=*** eMMC init failure
#51 opened by betamoon1 - 8
error code *== (short long long)
#31 opened by hongtm77 - 1
- 6
What is wrong with 2.7.4?
#44 opened by caden3ds - 1
- 3
Picofly Boots to Ofw
#24 opened by Christianacqua - 0
Just Blue Blinking
#47 opened by FrateXZ - 0
- 1
"Failed to init sd card!"; Apparently a problem with SD card 512gb Samsung Evo Plus
#45 opened by mxarment - 48
LED do not work with RP2040 clone
#27 opened by lucasromeiro - 1
When the console its completely turned off and i plug the console to the charger/dock it runs the payload.
#43 opened by Nintendero65pro - 4
- 8
picofly no sd OFW Boot broken on 17.0.0
#34 opened by 1stdevfriend - 2
Bypass pico and boot to owf without sd card
#41 opened by obibann - 0
Picofly stoped working after using RetroArch
#40 opened by SwiX404 - 2
Blue LED then ** yellow pulses
#39 opened by SkKrT1 - 0
Adding Support for fixing corrupted EMMC
#38 opened by AlbertoHugonin - 0
Picofly does not glitch with rebuild nand(original prodinfo present) but boots into ofw.
#37 opened by hanswurst31 - 5
error code *=*(short long short)
#32 opened by fesily - 1
- 0
Error type =**= : what does it mean?
#35 opened by gusgus0 - 3
Cannot Glitch (===)
#21 opened by 112cxyz - 15
- 2
picofly no sd OFW Boot broken on 17.0.0
#30 opened by Ixolaro - 6
Error code ==* (Support)
#33 opened by Harry040502 - 0
having this error after picofly install
#29 opened by PASTO666 - 4
Modo bypass
#26 opened by leocsum - 1
error not listed
#18 opened by 11500606 - 1
the error is not listed
#15 opened by Trivisuko - 1
Error code not listed
#19 opened by aqw00 - 2
Mariko, HWFLY RP2040 core, 2.74, issue, random booting to black screen and left joycon does not dock
#23 opened by datapaganism - 2
Last firmware 2.74 issues
#16 opened by MercurioX85 - 0
using RP2040-PLUS
#22 opened by iArkAt9 - 1
reed switch
#20 opened by eried - 1
Alternative DAT0 for Lite
#17 opened by chuckyto - 9
What is contained in mariko_bct_data
#14 opened by songzhishuo - 6
Long short short short
#11 opened by quasicmatt - 2
error code Short Long Long
#10 opened by M007P - 1
Wires Lenght...
#13 opened by MakerLS - 1
2.72 does not work
#9 opened by setryky - 2
update via toolbox failed.
#8 opened by enrymodd - 3
2.72 grb to rgb doesn’t work
#7 opened by Gabry00101 - 9
Last update 2.72 does not update
#5 opened by curcius - 1
Port to ESP32-S3
#6 opened by floxcap - 2
Purple screen on SK hynix EMMC
#3 opened by dewolft - 1
Where did you build the firmware from?
#4 opened by paulober - 1
Please remove outdated and semi-dangerous firmwares, or at least move them to the archive?
#2 opened by lightninjay