Pinned Repositories
BIGTREETECH-S42B-V1.0
The closed-loop drive is to feedback the rotation angle of the stepping motor to the control panel, compare the distance that needs to be rotated with the distance of the actual rotation, calculate the error value, and then compensate, so as to prevent the problem of multi-step and lost step. The closed-loop drive can completely overcome the lost step of the open-loop stepping motor, and can also significantly improve the performance of the motor at high speed
blackmagic
In application debugger for ARM Cortex microcontrollers.
docs
Documentation for Particle
DUE-RADDS-GLCD
Setup for DUE with RADDS and Graphical LCD
ESP-Ruuvi-Collector
ESP32 firmware serving as a bridge between Ruuvi Tag with Ruuvi firmware and InfluxDB written in Arduino IDE
ESP32-audioI2S
Play mp3 files from SD via I2S
esp32-deauth-monitor
ESP32 firmware app that monitors deauthentication packets to and from a target AP
FaBoGas-CCS811-Library
FT2232HL-Board
USB to dual UART / SPI / I2C / JTAG / FIFO / Bit-Bang...
Quas7's Repositories
Quas7/ESP-Ruuvi-Collector
ESP32 firmware serving as a bridge between Ruuvi Tag with Ruuvi firmware and InfluxDB written in Arduino IDE
Quas7/FT2232HL-Board
USB to dual UART / SPI / I2C / JTAG / FIFO / Bit-Bang...
Quas7/BIGTREETECH-S42B-V1.0
The closed-loop drive is to feedback the rotation angle of the stepping motor to the control panel, compare the distance that needs to be rotated with the distance of the actual rotation, calculate the error value, and then compensate, so as to prevent the problem of multi-step and lost step. The closed-loop drive can completely overcome the lost step of the open-loop stepping motor, and can also significantly improve the performance of the motor at high speed
Quas7/blackmagic
In application debugger for ARM Cortex microcontrollers.
Quas7/docs
Documentation for Particle
Quas7/DUE-RADDS-GLCD
Setup for DUE with RADDS and Graphical LCD
Quas7/ESP32-audioI2S
Play mp3 files from SD via I2S
Quas7/esp32-deauth-monitor
ESP32 firmware app that monitors deauthentication packets to and from a target AP
Quas7/FaBoGas-CCS811-Library
Quas7/HandiPi
Handheld RPI4 based computer with keyboard and display
Quas7/klipper
Klipper is a 3d-printer firmware
Quas7/LoStik
LoRaWAN compatible USB test device
Quas7/lostik_examples
This repository contains code examples in Python to use with the LoStik device
Quas7/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
Quas7/MKS-SERVO42B
MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F103C8T6 ARM 32-bit Cortex™-M3 CPU Core,72 MHz. Magnetic encoder is Allegro's A1333LLETR-T Contactless 0° to 360° angle sensor IC ,12bit .This Project open source hardware and code,support platformio build and upload firmware...
Quas7/MKS-SERVO42C
MKS SERVO42C, an upgraded version of MKS SERVO42B, built-in Field-Oriented control algorithm, position/speed/ torque closed-loop, 4 Half bridge driver with 8 MOSFET, it makes the motor quieter, lower vibration and Lower calorific.
Quas7/pms5003
Arduino: PMS5003 Air Quality Sensor library.
Quas7/sigrok-util
Read-only mirror of the official repo at git://sigrok.org/sigrok-util. Pull requests welcome. Please file bugreports at sigrok.org/bugzilla.