Avnet/Ultra96-PYNQ

Issues

• Juliabrot Fractal Overlay was stale

  #100 opened 19 days ago by FredKellerman
  0

• yocto support

  #97 opened 5 months ago by embetrix
  3

• Enable Wifi for Ultra96-V2? How ??

  #95 opened 2 years ago by jiapei100
  1

• Is this one suitable for Ultra96-V2?

  #94 opened 2 years ago by jiapei100
  1

• I2C1 not Operating at 400KHz

  #87 opened 2 years ago by phishphood
  2

• V2.7 PYNQ for Ultra96v2, cannot import pynq

  #86 opened 3 years ago by dj-park
  7

• unable to get grove sensors96 mezannine working with Ultra96

  #85 opened 3 years ago by ProjectHydroTech
  3

• Link to access the Ultra96V2 image is broken.

  #82 opened 3 years ago by gordonro
  1

• Ultra96-v2 RNDIS Driver fails to install on Windows 10 64-bit

  #79 opened 4 years ago by jomoengineer
  5

• desktop now show

  #80 opened 4 years ago by PapaKache
  1

• Failed to install docker _not sure if it is OS incompatible issue

  #81 opened 4 years ago by royliuyu
  2

• How do I get connected to the board (Ultra96-v2 & Ultra96-PYNQ v2.5)?

  #60 opened 4 years ago by fengyuentau
  5

• 2.6 First Boot up issues(Connection refused, no jypter notebook)

  #78 opened 4 years ago by JackBonnellDevelopment
  1

• Kernel, gcc and modules (v2.6)

  #77 opened 4 years ago by combinatorylogic
  1

• Heating and CPUs at max speed

  #74 opened 4 years ago by balintbarna
  1

• Slow download speed for prebuilt images

  #76 opened 4 years ago by balintbarna
  1

• Is an Ubuntu 20 based image in the works?

  #73 opened 4 years ago by balintbarna
  1

• Heating issue

  #75 opened 4 years ago by balintbarna
  1

• PMBUS in Ultra96 V2 2.5

  #72 opened 4 years ago by AnantaBalaji
  1

• Incomplete kernel headers in v2.6 (Ultra96v2 image)

  #71 opened 4 years ago by combinatorylogic
  3

• Purpose of fix_u96v2_pwrseq_simple.patch

  #63 opened 4 years ago by jan-kiszka
  12

• Route UART1 to expansion connector

  #64 opened 4 years ago by jan-kiszka
  3

• Ultra96 V2 2.5 Bluetooth can‘t scan any devices

  #58 opened 5 years ago by sazczmh
  1

• AXI4 master in PL

  #57 opened 5 years ago by combinatorylogic
  4

• PL Devicetree Overlay - Ultra96 v2, PYNQ v2.5

  #56 opened 5 years ago by TJLW
  1

• none of the pre-built images are downloading

  #55 opened 5 years ago by mdxtinkernick
  3

• NFS server does not work for Ultra96 V1, PYNQ V2.5

  #54 opened 5 years ago by yahoo2016
  1

• Ubuntu 18.04 name resolution fails inside the chroot for pip install

  #46 opened 5 years ago by powderluv
  9

• mmc0 error during boot

  #51 opened 5 years ago by ric96
  3

• [URGENT PLS] Ultra96 V2 2.5 Bluetooth not working

  #52 opened 5 years ago by AnantaBalaji
  4

• Build error when building PYNQ-compatible BSPs from scratch

  #47 opened 5 years ago by masahi
  8

• Ultra96 v2 & v2.5 - Boot OK but Done LED does not lit. up

  #41 opened 5 years ago by nhphuong91
  3

• Failure to boot when using STM32 sensor mezzanine

  #34 opened 5 years ago by crbednarz
  3

• No wifi access point after booted.

  #33 opened 5 years ago by ms0488638
  2

• where is ultra96-v2 bsp????

  #31 opened 5 years ago by tccxy
  1

• Instructions good but hardware design it trys to use is not

  #16 opened 6 years ago by focalplane
  1

• PS SPI unit user device drivers not showing up

  #9 opened 6 years ago by focalplane
  1

• Cannot open the jupyter page

  #13 opened 6 years ago by aikenpang
  2

• Ultra96 Board with PYNQ Connectivity Issues

  #10 opened 6 years ago by yasaspeiris
  1

• Ultra96 Vivado Project for Base Hardware

  #12 opened 6 years ago by hcook95
  2

• ultra96 sdsoc platform

  #7 opened 6 years ago by jiangwx
  3

• Board=Unknown

  #3 opened 6 years ago by schelleg
  1