author | level | title | subtitle | beastversion | tracerversion |
---|---|---|---|---|---|
Nicola F. Müller,Louis du Plessis |
Beginner |
Skyline plots |
Inference of past population dynamics using Bayesian Coalescent Skyline and Birth-Death Skyline plots. |
2.5.x |
1.7.x |
Population dynamics influence the shape of the tree and consequently, the shape of the tree contains some information about past population dynamics. The so-called Skyline methods allow to extract this information from phylogenetic trees in a non-parametric manner. It is non-parametric since there is no underlying system of differential equations governing the inference of these dynamics. In this tutorial we will look at two different methods to infer these dynamics from sequence data. The first one is the Coalescent Bayesian Skyline plot {% cite Drummond2005 --file Skyline-plots/master-refs %}, which is based on the coalescent model, and the second one is the Birth-Death Skyline plot {% cite Stadler2013 --file Skyline-plots/master-refs %} based on the birth-death model. The conceptual difference between coalescent and birth-death approaches lies in the direction of the flow of time. In the coalescent, the time is modeled to go backwards, from present to past, while in the birth-death approach it is modeled to go forwards. Two other fundamental differences are the parameters that are inferred and the way sampling is treated.
BEAST2 (http://www.beast2.org) is a free software package for Bayesian evolutionary analysis of molecular sequences using MCMC and strictly oriented toward inference using rooted, time-measured phylogenetic trees. This tutorial is written for BEAST v{{ page.beastversion }} {% cite Bouckaert2014 --file Skyline-plots/master-refs %}, {% cite Bouckaert2019 --file Skyline-plots/master-refs %}.
BEAUti2 is a graphical user interface tool for generating BEAST2 XML configuration files.
Both BEAST2 and BEAUti2 are Java programs, which means that the exact same code runs on all platforms. For us it simply means that the interface will be the same on all platforms. The screenshots used in this tutorial are taken on a Mac OS X computer; however, both programs will have the same layout and functionality on both Windows and Linux. BEAUti2 is provided as a part of the BEAST2 package so you do not need to install it separately.
Tracer (http://beast.community/tracer) is used to summarise the posterior estimates of the various parameters sampled by the Markov Chain. This program can be used for visual inspection and to assess convergence. It helps to quickly view median estimates and 95% highest posterior density intervals of the parameters, and calculates the effective sample sizes (ESS) of parameters. It can also be used to investigate potential parameter correlations. We will be using Tracer v{{ page.tracerversion }}.
We will be using R to analyze the output of the Birth-Death Skyline plot. RStudio provides a user-friendly graphical user interface to R that makes it easier to edit and run scripts. (It is not necessary to use RStudio for this tutorial).
In this tutorial we will estimate the dynamics of the Egyptian Hepatitis C epidemic from genetic sequence data collected in 1993.
The aim of this tutorial is to:
- Learn how to infer population dynamics;
- Get to know how to choose the set-up of a skyline analysis;
- Get to know the advantages and disadvantages of the Coalescent Bayesian Skyline Plot and the Birth-Death Skyline.
The dataset consists of an alignment of 63 Hepatitis C sequences sampled in 1993 in Egypt {% cite Ray2000 --file Skyline-plots/master-refs %}. This dataset has been used previously to test the performance of skyline methods {% cite Drummond2005 --file Skyline-plots/master-refs %} {% cite Stadler2013 --file Skyline-plots/master-refs %}.
With an estimated 15-25%, Egypt has the highest Hepatits C prevalence in the world. In the mid 20^(th) century, the prevalence of Hepatitis C increased drastically (see Figure 1 for estimates). We will try to infer this increase from sequence data.
The alignment file can be downloaded from the Taming the BEAST website at https://taming-the-beast.org/tutorials/Skyline-plots/ by downloading the file hcv.nexus
from the left-hand panel, under the heading Date.
We will use BEAUti to generate the configuration file for BEAST2 from the sequence alignment.
While the coalescent-based Bayesian Skyline Plot is integrated in the BEAST2 core, we need to install the BDSKY package, which contains the Birth-Death Skyline model. Installation of packages is done using the package manager, which is integrated into BEAUti.
Open the BEAST2 Package Manager by navigating to File > Manage Packages.
Install the BDSKY package by selecting it and clicking the Install/Upgrade button (Figure 2).
After the installation of a package, the program is on your computer, but BEAUti is unable to load the template files for the newly installed model unless it is restarted. So, let's restart BEAUti to make sure we have the BDSKY model at hand.
Figure 2: Install the BDSKY package which contains the Birth-Death Skyline model.Close the BEAST2 Package Manager and restart BEAUti to fully load the BDSKY package.
To start we have to import the alignment into BEAUti.
In the Partitions panel, import the nexus file with the alignment by navigating to File > Import Alignment in the menu and then finding the
hcv.nexus
file on your computer or simply drag and drop the file into the BEAUti window.
BEAUti will recognize the sequences from the *.nexus
file as nucleotide data. It will do so for sequence files with the character set of A C G T N, where N indicates an unknown nucleotide. As soon as other non-gap characters are included (e.g. using R or Y to indicate purines and pyramidines) BEAUti will not recognize the data as nucleotides anymore (unless the type of data is specified in the *.nexus
file) and open a dialogue box to confirm the data type.
The sequences were all sampled in 1993 so we are dealing with a homochronous alignment and do not need to specify tip dates.
Skip the Tip Dates panel and navigate to the Site Model panel.
The next step is to specify the model of nucleotide evolution (the site model). We will be using the GTR model, which is the most general reversible model and estimates transition probabilities between individual nucleotides separately. That means that the transition probabilities between e.g. A and T will be inferred separately to the ones between A and C, however transition probabilities from A to C will be the same as C to A etc. Additionally, we allow for rate heterogeneity among sites. We do this by changing the Gamma Category Count to 4 (normally between 4 and 6).
Figure 3: Set a GTR site model with a Gamma Category Count of 4.Change the Gamma Category Count to 4, make sure that the estimate box next to the Shape parameter of the Gamma distribution is ticked and set Subst Model to GTR. Make sure that the estimate box is ticked for all but one of the 6 rates (there should be 5 ticked boxes) and that Frequencies are estimated (Figure 3).
Topic for discussion: Why are only 5 of the 6 rates of the GTR model estimated?
Because our sequences are contemporaneous (homochronous data) there is no information in our dataset to estimate the clock rate (for more information on this refer to the prior-selection tutorial) and we have to use external information to calibrate the clock. We will use an estimate inferred in {% cite Pybus2001 --file Skyline-plots/master-refs %} to fix the clock rate. In this case all the samples were contemporaneous (sampled at the same time) and the clock rate is simply a scaling of the estimated tree branch lengths (in substitutions/site) into calendar time.
Figure 4: Set the clock rate to 0.00079 s/s/y.Navigate to the Clock Model panel.
Leave the clock model as a Strict Clock and set Clock.rate to 0.00079 s/s/y (Figure 4). (Note that BEAUti is smart enough to know that the clock rate cannot be estimated on this dataset and grays out the estimate checkbox).
Now we are ready to set up the Coalescent Bayesian Skyline as a tree-prior.
Figure 5: Choose the Coalescent Bayesian Skyline as a tree prior.Navigate to the Priors panel and select Coalescent Bayesian Skyline as the tree prior (Figure 5).
The Coalescent Bayesian Skyline divides the time between the present and the root of the tree (the tMRCA) into segments, and estimates a different effective population size ({% eqinline N_e %}) for each segment. The endpoints of segments are tied to the branching times (also called coalescent events) in the tree (Figure 6), and the size of segments is measured in the number of coalescent events included in each segment. The Coalescent Bayesian Skyline groups coalescent events into segments and jointly estimates the {% eqinline N_e %} (bPopSizes parameter in BEAST) and the size (bGroupSizes parameter) of each segment. To set the number of segments we have to change the dimension of bPopSizes and bGroupSizes (note that the dimension of both parameters has to be the same). Note that the length of a segment is not fixed, but dependent on the timing of coalescent events in the tree (Figure 6), as well as the number of events contained within a segment (bGroupSizes).
Figure 6: Example tree where the red dotted lines show the time-points of coalescent events.Figure 7: Show the initialization panel.To change the number of segments we have to navigate to the Initialialization panel, which is by default not visible. Navigate to View > Show Initialization Panel to make it visible and navigate to it (Figure 7).
Set the dimension of bPopSizes and bGroupSizes to 4 (the default value is 5) (Figure 8).
Figure 8: Set the dimension of bPopSizes and bGroupSizes to 4.
This sets the number of segments equal to 4 (the parameter dimension), which means {% eqinline N_e %} will be allowed to change 3 times between the tMRCA and the present (if we have {% eqinline d %} segments, {% eqinline N_e %} is allowed to change {% eqinline d-1 %} times).
We can leave the rest of the priors as they are and save the XML file. We want to shorten the chain length and decrease the sampling frequency so the analysis completes in a reasonable time and the output files stay small. (Keep in mind that it will be necessary to run a longer chain for parameters to mix properly).
Navigate to the MCMC panel.
Change the Chain Length from 10'000'000 to 3'000'000.
Click on the arrow next to the tracelog and change the File Name to
$(filebase).log
and set the Log Every to 3'000.Click on the arrow next to the treelog and change the File Name to
$(filebase).$(tree).log
and set the Log Every to 3'000.Leave all other settings at their default values and save the file as
hcv_coal.xml
.
When we run the analysis $(filebase)
in the name of the *.log
and *.trees
files will be replaced by the name of the XML file. This is a good idea, since it makes it easy to keep track of which XML files produced which output files.
Now we are ready to run the analysis.
Start BEAST2 and choose the file
hcv_coal.xml
.If you have BEAGLE installed tick the box to Use BEAGLE library if available, which will make the run faster.
Hit Run to start the analysis.
The analysis will take about 10 minutes to complete. Read through the next section while waiting for your results or start preparing the XML file for the birth-death skyline analysis.
The coalescent model that the Coalescent Bayesian Skyline is based on assumes that the sequences represent a small sample from a haploid population evolving under Wright-Fisher dynamics (Figure 9). The model works by calculating the probability of the tree under this assumption. This essentially boils down to repeatedly asking the question of how likely it is for two lineages to coalesce (have a common ancestor) in a given time.
Figure 9: The basic principle behind the coalescent. Figure from {% cite Rosenberg2002 --file Skyline-plots/master-refs %}.The effective population size ({% eqinline N_e %}) is the inverse of the rate of coalescence {% eqinline \lambda %}. The larger {% eqinline N_e %} is the less likely lineages are to coalesce. Thus, intervals in a sampled tree with many branching events often coincide with periods when the population size was small. Similarly, few branching events occur during periods of large population size. (Note that these results are conditioned on sampling only a small fraction of the population).
{% eq
\lambda = \frac{1}{N_e}
%}
For an SIR model (Susceptible, Infected and Recovered), {% eqinline N_e %} is proportional to the overall population size {% eqinline N %} and the number of infected {% eqinline I %} and inversely proportional to the transmission rate {% eqinline \theta %}.
{% eq N_e = \frac{I}{\theta} \frac{N}{S} %}
Estimates of {% eqinline N_e %} therefore do not directly tell us something about the number of infected, nor the transmission rate. However, changes in {% eqinline N_e %} can be informative about changes in the transmission rate or the number of infected (if they do not cancel out).
The Coalescent Bayesian Skyline model allows {% eqinline N_e %} to change over time in a nonparametric fashion (i.e. we do not have to specify an equation governing changes in {% eqinline N_e %} over time). Another way to think about the model is as maximally-parameterized, since it infers {% eqinline d %} change-point times (segment boundaries) and a value for {% eqinline N_e %} in each segment. This makes the Bayesian Skyline flexible enough to model very complicated {% eqinline N_e %} dynamics, provided that enough segments are specified. It may be tempting to specify the maximum dimension for the model (each group contains only one coalescent event, thus {% eqinline N_e %} changes at each branching time in the tree), making it as flexible as possible. This is the parameterization used by the Classic Skyline plot {% cite Pybus2000 --file Skyline-plots/master-refs %}, which is the direct ancestor of the Coalescent Bayesian Skyline plot. However, the only informative events used by the Coalescent Bayesian Skyline plot are the coalescent events. Thus, using a maximally-flexible parameterization with only one informative event per segment often leads to erratic and noisy estimates of {% eqinline N_e %} over time (especially if segments are very short, see Figure 6). Grouping segments together leads to smoother and more robust estimates.
Choosing the dimension for the Bayesian Skyline can be rather arbitrary. If the dimension is chosen too low, not all population size changes are captured, but if it is chosen too large, there may be too little information in a segment to support a robust estimate. When trying to decide if the dimension is appropriate it may be useful to consider the average number of informative (coalescent) events per segment. (A tree of {% eqinline n %} taxa has {% eqinline n-1 %} coalescences, thus {% eqinline N_e %} in each segment is estimated from on average {% eqinline \frac{n-1}{d} %} informative data points). Would this number of random samples drawn from a hypothetical distribution allow you to accurately estimate the distribution? If not, consider decreasing the dimension. There are descendants of the coalescent skyline in BEAST that either estimate the number of segments (Extended Bayesian Skyline {% cite Heled2008 --file Skyline-plots/master-refs %}) or do not require the number of segments to be specified (Skyride {% cite Minin2008 --file Skyline-plots/master-refs %}), but instead makes very strong prior assumptions about changes in {% eqinline N_e %}.
For the reconstruction of the population dynamics, we need two files, the *.log
file and the *.trees
file. The log file contains the information about the group sizes and population sizes of each segment, while the trees file is needed for the times of the coalescent events.
Figure 10: Loading the log file into Tracer.Load the logfile into Tracer to check mixing and parameter estimates (Figure 10).
Because we shortened the chain most parameters have very low ESS values. If you like, you can compare your results with the example results we obtained with identical settings and a chain of 30,000,000 (hcv_coal_30M.log
).
Figure 11: Reconstructing the Bayesian Skyline plot in Tracer.Navigate to Analysis > Bayesian Skyline Reconstruction. From there open the
*.trees
file. To get the correct dates in the analysis we should specify the Age of the youngest tip. In our case it is 1993, the year where all the samples were taken. If the sequences were sampled at different times (heterochronous data), the age of the youngest tip is the time when the most recent sample was collected.Press OK to reconstruct the past population dynamics (Figure 11).
The output will have the years on the x-axis and the effective population size on the y-axis. By default, the y-axis is on a log-scale. If everything worked as it is supposed to work you will see a sharp increase in the effective population size in the mid 20^(th) century, similar to what is seen on Figure 12.
(Note that the reconstruction will only work if the *.log
and *.trees
files contain the same number of states and both files were logged at the same frequency).
There are two ways to save the analysis, it can either be saved as a *.pdf
for display purposes or as a tab delimited file.
Navigate to File > Export Data Table.
Enter the filename as
hcv_coal.tsv
and save the file.
The exported file will have five rows, the time, the mean, median, lower and upper boundary of the 95% HPD interval of the estimates, which you can use to plot the data with other software (R, Matlab, etc).
If we compare the estimates of the population dynamics using different dimensions, we see that most of the dynamics are already captured with having only 2 dimensions, as shown in Figure 13. Adding more dimensions only changes the inferred effective population size before 1900. Note that adding more dimensions adds a slight dip before the increase in the effective population size (around 1900). When comparing to the HPD intervals (Figure 12) we see that this dip is not significant and may not be indicative of a real decrease in the effective population size before the subsequent increase.
Figure 13: Estimated mean effective population sizes using different dimensions.The choice of the number of dimensions can also have a direct effect on how fast the MCMC converges (Figure 14). The slower convergence with increasing dimension can be caused by e.g. less information in intervals. To some extent it is simply caused by the need to estimate more parameters though.
Figure 14: The ESS value of the posterior after running an MCMC chain with {% eqinline 10^7 %} samples, logged every {% eqinline 10^3 %} steps and a burnin of 10% for using different dimensions of the Coalescent Bayesian Skyline.In the first analysis, we used the coalescent approach to estimate population dynamics. We now want to repeat the analysis using the Birth-Death Skyline model. We will use the same model setup as in the previous analysis and only change the tree prior.
Restart BEAUti, load
hcv.nexus
as before and set up the same site and clock model as in the Coalescent Bayesian Skyline analysis.
We will need to set the prior to Birth Death Skyline Contemporary, since the sequences were all sampled at the same point in time. For heterochronous data (sequences sampled at different times), we would use Birth Death Skyline Serial. As with the Coalescent Bayesian Skyline, we need to set the number of dimensions. Here we set the dimension for {% eqinline R_e %}, the effective reproduction number, which denotes the average number of secondary infections caused by an infected person at a given time during the epidemic, i.e. an {% eqinline R_e %} of 2 would mean that every infected person causes two new infections on average. In other words, an {% eqinline R_e %} above 1 means that the number of cases are increasing, therefore the disease will cause an exponentially growing epidemic, and an {% eqinline R_e %} below 1 means that the epidemic will die out.
Figure 15: Setting the prior on the tree to the Birth-Death Skyline.Navigate to the Priors panel and select Birth Death Skyline Contemporary as the tree prior (Figure 15).
Then, click on the button where it says initial = [2.0] [0.0, Infinity] next to reproductiveNumber. A pop-up window will open which allows us to change the dimension of the parameter (Figure 16). In this case we will keep the default dimension of 10.
Press OK to close the pop-up window.
Figure 16: Setting the dimension of the reproductiveNumber parameter.
This means that {% eqinline R_e %} will be allowed to change at 9 times equally spaced between the origin of the epidemic and the present time. Choosing this dimension can again be arbitrary and may require the testing of a few different values. Too few intervals and not all rate shifts are captured. Too many intervals and the intervals may not contain enough information to infer parameters. (As with setting the dimension of the Coalescent Bayesian Skyline the dimension of {% eqinline R_e %} can also be set in the initialization panel).
Besides {% eqinline R_e %} (reproductiveNumber), the Birth Death Skyline Contemporary model has 3 more parameters, becomeUninfectiousRate (the rate at which infected patients become uninfectious, {% eqinline \delta %}, through recovery, death or isolation), rho (the proportion of lineages sampled in the present, {% eqinline \rho %}) and the origin (the time at which the index case became infected, which is always earlier than the tMRCA of the tree). We may know some of these parameters from literature or be able to estimate them from external sources. For example, the average time that patients are able to transmit a disease is informative about the becomeUninfectiousRate. This prior knowledge we can incorporate in our analysis by setting appropriate priors for these parameters.
We will use a lognormal prior for {% eqinline R_e %}. This is a good prior distribution to use for rates since it is always positive (a rate cannot be negative) and has a long tail defined over all positive numbers. The long tail allows arbitrarily high estimates of {% eqinline R_e %}, but does not place much weight on very high rates. This agrees with our prior knowledge about {% eqinline R_e %} (most diseases have an {% eqinline R_e %} between 1.2 and 5. Measles is one of the most infectious diseases we know about and has {% eqinline R_e \approx 18 %}). If an epidemic is neither growing or declining, it has an {% eqinline R_e %} of 1, which we will use as a null hypothesis, by setting a prior on {% eqinline R_e %} centered around 1 (we assume that if there isn't a strong signal in an interval for an epidemic to grow or decline that {% eqinline R_e = 1 %}, i.e. the epidemic size stays constant). Note that this prior is used for each of the {% eqinline R_e %} intervals (the Birth-Death Skyline assumes that {% eqinline R_e %} is independent in each of the intervals).
Figure 17: Setting the {% eqinline R_e %} prior.Select a Log Normal distribution for the reproductiveNumber prior.
Click on the arrow to the left of reproductiveNumber to open all the options for {% eqinline R_e %} settings
Set M to 0, which results in a median of 1. We set the variance to 1.25, which places most weight below 7.82 (95% quantile). (Figure 17).
For the becoming uninfectious rate we will again use a log normal prior. The inverse of the becoming uninfectious rate is the average infectious period. In some patients an HCV infection only lasts a few weeks, while in others it is a chronic infection lasting for many years. Setting {% eqinline M=0 %} and {% eqinline S=1.25 %} results in the same prior we used for the {% eqinline R_e %}. In terms of the becoming uninfectious rate, this translates to the 95% quantiles for the infectious period falling between 0.0862 years (31.5 days) and 11.59 years, with a median of 1 year. We will see later that there is a strong signal in the data for a longer becoming uninfectious period.
Figure 18: Setting the becoming uninfectious rate prior.Set the same prior for becomeUninfectiousRate as for reproductiveNumber (Log Normal, with M=0.0, S=1.25) (Figure 18)
The sampling proportion, {% eqinline \rho %}, represents the proportion of HCV cases in Egypt in 1993 that are included in the analysis. In 1993 Egypt had a population of roughly 60 million people, and with a prevalence of at least 15% this translates into millions of cases, while we only have 63 sequences.
We will use a beta distribution for the prior on {% eqinline \rho %}. Beta distributions are a very flexible class of distributions that are only defined between 0 and 1, making them ideal to use for proportions.
Figure 19: Setting the prior on {% eqinline \rho %}.Select a Beta distribution for the rho prior.
Click on the arrow to the left of rho to open all the options for the prior settings.
Alpha to 1 and Beta to 9999, reflecting our prior knowledge that our dataset represents only a miniscule fraction of cases (Figure 19).
Finally, we need to set a prior for the origin of the epidemic. We will once again use a log normal distribution for this parameter. Note that the origin also has to be positive and needs to be bigger than the MRCA of the tree. We know that HCV has been circulating in Egypt for at least a hundred years, so we set a prior with a median value greater than 100.
Figure 20: Setting the prior on the origin of the epidemic.Set a Log Normal prior for origin with M = 5 and S = 0.5 (Figure 20), resulting in a median prior estimate for the origin of 148 years.
The rest of the priors pertain to the site model parameters and we can leave them as they are.
Navigate to the MCMC panel.
Change the Chain Length from 10'000'000 to 3'000'000.
Click on the arrow next to the tracelog and change the File Name to
$(filebase).log
and set the Log Every to 3'000.Click on the arrow next to the treelog and change the File Name to
$(filebase).$(tree).log
and set the Log Every to 3'000.Leave all other settings at their default values and save the file as
hcv_bdsky.xml
.
Now we are ready to run the analysis.
Start BEAST2 and choose the file
hcv_bdsky.xml
.If you have BEAGLE installed tick the box to Use BEAGLE library if available, which will make the run faster.
Hit Run to start the analysis.
Look at the topics for discussion below and read through the next section while waiting for the analysis to finish.
Topics for discussion:
- We set a prior on {% eqinline R_e %} in the Birth-Death Skyline analysis, but did not set any prior for {% eqinline N_e %} in the Coalescent Bayesian Skyline analysis. Is there a prior on {% eqinline N_e %}? If so, what is it?
- We fixed the clock rate to an independent estimate and set a strict clock. If we had strong prior knowledge that there is substitution rate variation over time in the Egyptian HCV epidemic, could we use a relaxed clock here?
The birth-death model is parameterized very differently from the coalescent model, using per lineage rates and an explicit sampling model (whereas the coalescent model conditions on the samples). This makes the birth-death model more powerful, but also much more complex. A basic birth-death model has a birth rate ({% eqinline \lambda %}), the rate at which lineages are added to the tree, and a death rate ({% eqinline \delta %}), the rate at which lineages are removed from the tree (Figure 21). In an infectious disease epidemic {% eqinline \lambda %} can be thought of as the transmission rate, the rate at which rate infected individuals infect susceptibles, while {% eqinline \delta %} can be thought of as the becoming uninfectious rate, the rate at which infected individuals recover, die or are isolated. In species tree inferences these rates can be thought of in terms of speciation and extinction.
Figure 21: A schematic of the BDSKY model.The Birth Death Skyline Contemporary model we used was parameterized in terms of {% eqinline R_e %} and {% eqinline \delta %}. Recall that {% eqinline R_e > 1 %} means that an epidemic will keep growing. We can see this from the definitioin of {% eqinline R_e %} as the ratio of the birth and death rates.
{% eq R_{e} = \frac{\lambda}{\delta} %}
if {% eqinline \lambda > \delta %} then {% eqinline R_e > 1 %} | epidemic grows |
if {% eqinline \lambda = \delta %} then {% eqinline R_e = 1 %} | epidemic stays constant |
if {% eqinline \lambda < \delta %} then {% eqinline R_e < 1 %} | epidemic declines |
We used this paramerization simply because it is often easier to specify priors for {% eqinline R_e %} than the transmission rate, and because {% eqinline R_e %} is often more informative for prevention efforts. In addition, the model also has a sampling probability ({% eqinline \rho %}) parameter, which in our analysis describes how likely it is that a person infected with HCV in Egypt in 1993 was sampled in our dataset. The final parameter is the origin. Whereas coalescent models work backward-in-time from the sampled sequences, birth-death models work forward-in-time from the origin. Hence, the model needs an origin time, which can also be jointly estimated along with the other parameters. The origin will always be bigger than the tMRCA of the sampled tree, since the sampled tree is by definition smaller than the complete tree.
You may have noticed that there are many Birth-Death Skyline models available in BEAUti. For example, the Birth Death Skyline Contemporary BDSParam model is parameterized in terms of {% eqinline \lambda, \delta %} and {% eqinline \rho %} and is usually more appropriate for macro-evolutionary studies. The Birth Death Skyline Serial model assumes that the data are heterochronous (sampled at different times). It assumes that:
{% eq \delta = \psi + \mu %}
where {% eqinline \psi %} is the rate at which lineages are sampled through time and {% eqinline \mu %} is the rate at which lineages are removed from the tree for any other reason (death, recovery, extinction etc.). (In this case the {% eqinline \rho %} parameter is no-longer available, because samples are collected through time, and not just at one timepoint). By default, the model is parameterized in terms of {% eqinline R_e , \delta %} and {% eqinline p %}, the sampling proportion:
{% eq p = \frac{\psi}{\psi + \mu} %}
The sampling proportion is the proportion of all removed lineages that were sampled, and can be used to obtain a rough estimate of the total population size. This model is useful for studying infectious disease dynamics, because samples are often collected over the course of an epidemic. It can also be used for macro-evolutionary studies, when fossil data (morphological traits or ancient DNA) are incorporated. In that case a parameterization in terms of {% eqinline \lambda, \mu %} and {% eqinline \psi %} is preferable.
You can also see that the model Birth Death Skyline Serial assumes that upon sampling a lineage is removed from the tree (e.g. in a disease model the sampled individual cannot transmit the disease after sampling). The consequence for the phylogeny is that a sampled lineage cannot be a direct ancestor of any other lineage in the tree. This assumption can be relaxed, but we will not do so during this tutorial.
The Birth-Death Skyline model is very flexible and allows any or all of these rates to change independently over time. This is done by dividing the time from the origin to the most recent sample into dimension {% eqinline d %} equally spaced intervals (see Figure 22). The rates are then allowed to change between intervals. Since some rates (e.g. {% eqinline \lambda %} and {% eqinline \delta %}) are highly correlated, it is not always a good idea to let all rates change over time because it can lead to poor mixing or biased estimates (often we assume that the becoming uninfectious rate is constant while allowing {% eqinline R_e %} to change over time, as we did here). It is also possible to specify the change-point times more flexibly, or even estimate them, however for now this requires editing the XML file. Some examples are available here.
Figure 22: Example tree where the red dotted lines are an example of where rates could be allowed to change on the tree. The branch at the root (compare Figure 6) is indicating the origin of the epidemic, which is also estimated in the BDSKY.There is no equivalent visualization of the skyline plot of a Birth-Death Skyline (BDSKY) analysis in Tracer as there is for the Coalescent Bayesian Skyline. But because BDSKY separates the full tree into equally spaced intervals, we can already get an idea of the inference just by looking at the inferred {% eqinline R_e %} values (see Figure 23). This gives us a good idea of the trend, but it is not completely accurate. Since we are also estimating the origin parameter, the interval times are slightly different in each posterior sample and overlap slightly. The advantage of this is that we get a smooth estimate through time. The disadvantage is that we need to do some extra post-processing to plot the smooth skyline.
As with the Coalescent Bayesian Skyline, because we shortened the chain, most parameters have very low ESS values. If you like, you can compare your results with the example results we obtained with identical settings and a chain of 30,000,000 (hcv_bdsky_30M.log
).
We will use the R-package bdskytools
to plot the output of the BDSKY analysis. The package is still in development and not available over CRAN. Thus, we have to install the package directly over GitHub (note that you only have to install the package once):
install.packages("devtools")
library(devtools)
devtools::install_github("laduplessis/bdskytools")
Once the package is installed we have to load it into our R workspace before we can use the functions in the package.
To plot the results, we need to first tell R where to find the *.log
file of our run and then load it into R (discarding 10% of samples as burn-in). If you are using RStudio, you can change the working directory to the directory where you stored your log files, which makes it easier to load the files in R.
library(bdskytools)
# Navigate to Session > Set Working Directory > Choose Directory (on RStudio)
# or change fname to the full path to the log file
fname <- "hcv_bdsky.log"
lf <- readLogfile(fname, burnin=0.1)
Next, we can extract the HPDs of {% eqinline R_e %} and the becoming uninfectious rate:
Re_sky <- getSkylineSubset(lf, "reproductiveNumber")
Re_hpd <- getMatrixHPD(Re_sky)
delta_hpd <- getHPD(lf$becomeUninfectiousRate)
Next we plot the raw HPD intervals of {% eqinline R_e %}. This is equivalent to the output in Tracer.
plotSkyline(1:10, Re_hpd, type='step', ylab="R")
In order to plot the smooth skyline we have to marginalise our {% eqinline R_e %} estimates on a regular timegrid and calculate the HPD at each gridpoint. It is usually a good idea to use a grid with more cells than the dimension of {% eqinline R_e %}. To do this we first calculate the marginal posterior at every time of interest using the function gridSkyline
and then calculate the HPD for each of the finer time intervals. The times to grid the skyline on (timegrid
), refers to years in the past.
timegrid <- seq(0,400,length.out=101)
Re_gridded <- gridSkyline(Re_sky, lf$origin, timegrid)
Re_gridded_hpd <- getMatrixHPD(Re_gridded)
Now we are ready to plot the smooth skyline (remember that the sequences were sampled in 1993):
times <- 1993-timegrid
plotSkyline(times, Re_gridded_hpd, type='smooth', xlab="Time", ylab="R")
We can plot the gridded {% eqinline R_e %} skyline (not its HPDs) for a few of the MCMC samples to see what it really looks like as the Markov chain samples parameters. Note that the intervals overlap between different posterior samples. This is because the origin is different in each of the plotted samples. As we add more samples to the plot we start to see the smooth skyline appear.
plotSkyline(times, Re_gridded, type='steplines', traces=1, col=pal.dark(cblue,1),ylims=c(0,5),
xlab="Time", ylab="R", main="1 random sample")
plotSkyline(times, Re_gridded, type='steplines', traces=10, col=pal.dark(cblue,0.5),ylims=c(0,5),
xlab="Time", ylab="R", main="10 random samples")
plotSkyline(times, Re_gridded, type='steplines', traces=100, col=pal.dark(cblue,0.5),ylims=c(0,5),
xlab="Time", ylab="R", main="100 random samples")
plotSkyline(times, Re_gridded, type='steplines', traces=1000, col=pal.dark(cblue,0.1),ylims=c(0,5),
xlab="Time", ylab="R", main="1000 random samples")
Finally, we can plot both the {% eqinline R_e %} and {% eqinline \delta %} (the becoming uninfectious rate) on a single set of axes. Since we left the dimension of the becoming uninfectious rate at 1, it is constant through time. (Normally we would not plot constant parameters over a time period)! The output should be similar to Figure 27.
par(mar=c(5,4,4,4)+0.1)
plotSkylinePretty(range(times), as.matrix(delta_hpd), type='step', axispadding=0.0,
col=pal.dark(cblue), fill=pal.dark(cblue, 0.5), col.axis=pal.dark(cblue),
ylab=expression(delta), side=4, yline=2, ylims=c(0,1), xaxis=FALSE)
plotSkylinePretty(times, Re_gridded_hpd, type='smooth', axispadding=0.0,
col=pal.dark(corange), fill=pal.dark(corange, 0.5), col.axis=pal.dark(corange),
xlab="Time", ylab=expression("R"[e]), side=2, yline=2.5, xline=2, xgrid=TRUE,
ygrid=TRUE, gridcol=pal.dark(cgray), ylims=c(0,3), new=TRUE, add=TRUE)
An R-script with the above commands (and a few extras) is in the scripts/
directory (Skyline_Example.R
).
If the bdskytools package cannot be installed from GitHub the relevant scripts are also provided in the scripts/
directory.
Topic for discussion: Do the Birth-Death Skyline results agree with the Coalescent Bayesian Skyline results? How would your conclusions from the two analyses differ? (Hint: Use R to plot the results from both analyses).
Both the coalescent and the birth-death skylines assume that the population is well-mixed. That is, they assume that there is no significant population structure and that the sequences are a random sample from the population. However, if there is population structure, for instance sequences were sampled from two different villages and there is much more contact within than between villages, then the results will be biased {% cite Heller2013 --file Skyline-plots/master-refs %}. Instead a structured model should then be used to account for these biases.
- Bayesian Evolutionary Analysis with BEAST 2 {% cite BEAST2book2014 --file Skyline-plots/master-refs %}
- BEAST 2 website and documentation: http://www.beast2.org/
- BEAST 1 website and documentation: http://beast.bio.ed.ac.uk
- Join the BEAST user discussion: http://groups.google.com/group/beast-users
- bdskytools: An R-package for post-processing Birth-Death Skyline analyses
- TreeSlicer: A BEAST2 package (in development) that makes it easier to specify complex change-point times using BDSKY
{% bibliography --cited --file Skyline-plots/master-refs %}