BrewPi/firmware

Issues

• Refactor profiles and EEPROM handling

  #91 opened 6 years ago by elcojacobs
  0

• Remove nested IDs and nested containers

  #92 opened 6 years ago by elcojacobs
  0

• Implement CRC checking on communication and EEPROM

  #93 opened 6 years ago by elcojacobs
  0

• Object IDs should be part of object definition and creation command

  #80 opened 6 years ago by elcojacobs
  0

• Reserved object size should be defined by firmware and not the client

  #81 opened 6 years ago by elcojacobs
  0

• Return object ID in create object response

  #82 opened 6 years ago by elcojacobs
  0

• Sparse data implementation for protobuf is not compatible with protobufs omission of default values

  #83 opened 6 years ago by elcojacobs
  0

• Temperature control failed

  #85 opened 6 years ago by glibersat
  1

• Firmware 0.5.5 renders JSON with syntax error (unclosed quote).

  #86 opened 6 years ago by NamelessCoder
  9

• Change object type ID from 0-127 to 2 bytes so it can be used for versioning objects

  #84 opened 6 years ago by elcojacobs
  1

• Making binaries from elf files fails on CI server

  #47 opened 7 years ago by elcojacobs
  1

• Controller shouldn't send debug message on each temp update in a ramp

  #77 opened 7 years ago by elcojacobs
  0

• When Kp is set to a value over 128, it is not interpreted correctly in advanced settings

  #76 opened 7 years ago by elcojacobs
  0

• Can connect brewpi via WiFi

  #12 opened 9 years ago by m-mcgowan
  1

• Color scheme for embedded UI

  #11 opened 7 years ago by m-mcgowan
  0

• Temperature sensor warning disconnected, but seems to be back immediately

  #27 opened 7 years ago by elcojacobs
  0

• Travis CI build generates an incorrect binary

  #75 opened 7 years ago by elcojacobs
  0

• New system saves settings out the box

  #19 opened 7 years ago by m-mcgowan
  2

• Mash temperature control

  #30 opened 9 years ago by lucasjans
  1

• Beer temp integral not getting reset

  #35 opened 7 years ago by mike-treadway
  1

• When Raspberry Pi 2 and BrewPi power on at the same time, EEPROM reset can be triggered

  #36 opened 7 years ago by elcojacobs
  1

• When a temperature sensor returns null or is unavailable, PID input filter should not be updated

  #56 opened 7 years ago by elcojacobs
  1

• Filters can be initialized with invalid temperature sensor data

  #53 opened 7 years ago by elcojacobs
  0

• Hardware reference should be moved out of OneWire actuator and valve class

  #65 opened 7 years ago by elcojacobs
  1

• Where are the schematics?

  #66 opened 7 years ago by lthiery
  1

• With very low Kp, integrator can get stuck below setpoint when antiwindup equals p

  #74 opened 7 years ago by elcojacobs
  1

• Making a change in the advanced settings sets "Cooler minimum ON time" 0

  #68 opened 8 years ago by n8huntsman
  3

• With long minimum ON time and period, integrator can be held at zero.

  #58 opened 8 years ago by elcojacobs
  2

• F to C conversion error - Maximum difference between fridge and beer set point (= output of PID)

  #67 opened 8 years ago by n8huntsman
  1

• fall back to beer sensor when fridge sensor is unavailable

  #54 opened 8 years ago by elcojacobs
  3

• High speed screen updates

  #59 opened 8 years ago by m-mcgowan
  1

• Blank Arduino Cannot Program using Legacy Branch

  #44 opened 8 years ago by fuzzewuzze
  1

• Readme.md has been replaced in bad sqaush/merge of freertos

  #40 opened 8 years ago by elcojacobs
  0

• Developer docs in firmware repo and displayed with ReadTheDocs

  #50 opened 8 years ago by elcojacobs
  1

• hard-coded constants are configurable

  #20 opened 9 years ago by m-mcgowan
  1

• When temperature over 99.9 degrees is printed, the last digit is not cleared later

  #17 opened 9 years ago by elcojacobs
  1

• readme.md in each source directory to describe what it does

  #29 opened 9 years ago by m-mcgowan
  1

• .bin vs .hex

  #38 opened 9 years ago by konr
  1

• User can interact with the embedded UI

  #13 opened 9 years ago by m-mcgowan
  2

• Alarm doesn't sound right

  #31 opened 9 years ago by elcojacobs
  1

• Googletest in build

  #15 opened 9 years ago by elcojacobs
  2

• Beer temperature filter can oscillate when hot plugging a sensor

  #18 opened 9 years ago by elcojacobs
  4

• stringToTemp should result in INVALID_TEMP for null or None

  #16 opened 9 years ago by elcojacobs
  1

• No rounding of temperatures in temperature conversion

  #22 opened 9 years ago by elcojacobs
  1

• Error checking on strings received over Serial

  #21 opened 9 years ago by elcojacobs
  2

• Error in fixed point to string conversion when converting number close to whole number: x.998

  #24 opened 9 years ago by elcojacobs
  1

• CI server build and release for brewpi spark code

  #14 opened 9 years ago by m-mcgowan
  0

• Touch screen calibration is sometimes triggered, even when a calibration has been stored earlier

  #8 opened 9 years ago by elcojacobs
  2