BLE and MQTT based IoT System for Smart City Scenarios
End-to-End Open Source Proof-of-Concept IoT architecture for Smart Cities Scenarios
Published Paper
Table of Contents
About The Project
The MQTT protocol is supposed to be used at the application layer for transmitting data. The designed architecture is composed of four main functional layers:
-
The Sensing Layer is responsible of implementing the cyber-physical interface, enabling the possibility of sensing physical data from the users. The sensed data can be human related data, (e.g., hearth monitor, position) as well vehicle related data (e.g., battery charge, vehicle position) or environmental data (e.g., humidity, air temperature, pressure). Wearable sensors can be considered as deployed in sportswear without no need to use expensive vehicles.
-
The Gateway is responsible to collect data from the sensing layer through any proprietary/custom protocol embedded in an IP packet to be delivered through the Internet. The gateway layer is implemented through two different nodes, one enabling the interface towards the sensing layer while the other, acting as user personal device, for transmitting data toward the final destination. In particular, the gateway acts as the MQTT publisher and is implemented on a mobile device, assumed to be hold by the users. This choice allows the appoach to be available for any kind of road users, even in case of simple and cheap vehicles, like bikes or simple pedestrian. The mobile device can be replaced in principles by other devices already installed on more complex vehicles, like cars.
-
The MQTT Broker acts as intermediate point of the Publisher/Subcriber communication architecture. It is responsible of receiving any MQTT input from the Gateways and notify the subscriber about updated sensed data.
-
The Dashboard acts as MQTT subscriber enabling the possibility of showing all the data collected by the Gateway through internal sensors as well at the Sensing layer.
Sensing Layer
The sensing layer allows the collection of data, such as health information of the user with the wearable device, and the surrounding environmental information, through the collection of the sensors data that have been implemented. Sensors and actuators, in fact, are the primary source of information in an IoT system and provide the data that will then be processed by the device, e.g., a micro-controller, they are connected to. According to this view, we have implemented a general purpose embedded system for wearable devices, through the use of the ultra-low power SoC Esp32 produced by Espressif System. The ESP32 works as a GATT Server, hence it defines the BLE services and characteristics which are used in order to exchange the information gathered through the sensor with the Android Gateway. The GATT server hierarchy which has been defined is illustrated below. The full code can be found here.
Android Gateway
These information streams, gathered through the sensors, will then be sent to a smartphone –in this case an Android device– through a BLE connection. The role of the Android device is to provide an edge gateway which allows to offload the computational tasks directly to the mobile device rather than transmitting it to the cloud. This solution has been already considered as a viable option when Android devices are considered as an edge processing node. The program which have been developed enables the Android device to both act as a BLE Client, as well as a MQTT publisher and subscriber. The BLE connection is used to comunicate with the microcontroller which gathers the information, whereas the MQTT messaging protocol is used to comunicate with other Android devices and a Dashboard.
The Android app developed is depicted below.
MQTT Broker
The MQTT connection is implemented thanks to the broker which is running on a Raspberry Pi 3B. For what concerns the Broker software implementation we use Mosquitto, an open-source broker developed by Oracle, while the Android device and the web-service act as MQTT clients. The developed Android app also integrates the MQTT connection through the use of the Paho library, developed by Oracle, and publishes on predefined topics the information acquired by the sensors.
Dashboard
The control panel acts as a MQTT subscriber by subscribing to the topics the Android devices are publishing; this capability has been implemented through the use of the Paho JavaScript library. However, due to the HTTP protocol not being full-duplex, it is impossible to have a direct link for data exchange between the broker and the web-service, hence, we resorted to the use of MQTT over web-sockets. The full code can be found here.
Paper
- D’Ortona, C.; Tarchi, D.; Raffaelli, C. Open-Source MQTT-based End-to-End IoT System for Smart City Scenarios. Future Internet 2021, 1, 0. https://doi.org
License
Distributed under the GPL-3.0 License. See LICENSE.txt for more information.