CR6Community/CR-6-touchscreen
CR-6 SE touchscreen software extended with more functionality and pages than the stock CR-6 touchscreen software.
PowerShell
Issues
- 1
- 7
Support Touchscreen T5L1 DGUS2 v4.3 2021.10.21.
#104 opened by adelapava - 9
CFG file never updates
#103 opened by HVR88 - 1
Is it possible to add support for Marlin 2.1.x?
#101 opened by apassiou - 0
Support for Ender 3 V2
#102 opened by dhysuiej - 6
usage of dwinos_page_change.bin
#100 opened by Das-Weeman - 3
- 0
usage of file dwinos_page
#99 opened by Das-Weeman - 0
- 4
[FR] Color legend on ABL screen
#61 opened by lukemaurer - 12
Receiving this error consistently - Please flash your TFT screen: version mismatch - build 61166 found but expected 61
#90 opened by jcgrim - 3
Question: Laser engraving with PWM possible?
#91 opened by Schnema1 - 1
CR6 MAX w/ Community Firmware v6.1, and Failed Prints from Heater Timeout after Filament Runout
#95 opened by moadster - 3
[info] Compatible with CR10 Smart Pro?
#96 opened by boromyr - 17
Stuck on UI loading screen
#98 opened by wheetboi - 2
Are this JPEG artifacts on the screen?
#94 opened by zappanaut - 8
- 3
[FR] Please define and implement a display convention that makes it obvious when it is possible to tap a displayed value to change it
#25 opened by Thinkersbluff - 3
- 3
Where is the latest released firmware and DWIN-SET matched files for uploading and flashing??
#92 opened by oliverhbailey - 4
[QUESTION] There's compatibility with Ender5 Pro? 4.2.2 board STM32F103RE_creality chip
#88 opened by zonalimitatore - 0
Thanks
#87 opened by Kellee21fmomma - 17
- 10
Touchscreen reads, "build 61166 found but expected 61" after flashing the CF6.1 firmware
#65 opened by joshgebbie - 7
- 2
- 6
touchscreen reboots when touched
#70 opened by tcables - 4
Stuck in boot loading
#76 opened by jayse2006 - 1
DW7.7.5 on Creality Sermoon D1
#72 opened by tommy536 - 1
Temperature field on Esteps screen is blank on the feat/dwin-nextgen-support branch
#74 opened by Thinkersbluff - 1
Bed Mesh values super hard to read on the feat/dwin-nextgen-support branch
#75 opened by Thinkersbluff - 1
reckon this firmware will work on the screen on the cr10 smart is essentially the same isnt it just horizontal?
#71 opened by rickasheye - 4
Updating via uart
#64 opened by zgdump - 2
Filament Change (M600) number of beeps.
#62 opened by spenxerx4 - 3
CR-6 SE Screen Gray on boot
#66 opened by osxfr33k - 11
CR-10 Smart stock display orientation
#63 opened by badbod - 2
ICL tool in english
#53 opened by nicwilson58 - 5
- 4
"M117 Message"
#35 opened by areaknight99 - 2
Can't cancel (abort) print from pause
#32 opened by Lorraine1000 - 3
- 1
- 6
EEPROM Default settings
#24 opened by chriskoups - 1
- 3
CR-6 MAX leveling progress visualisation
#21 opened by Sebazzz - 2
[BUG] Displayed Disable Stepper ON/OFF "switch" state is affected by connecting Octoprint
#18 opened by Thinkersbluff - 2
- 4
Touchscreen freezes when selecting Print option
#19 opened by Dallagen2 - 3
Question/Offer: contribute translation
#16 opened by rmeissn - 5
Can't run DGUS software
#17 opened by SimonTil